• Research in Plant Disease
• /
• v.23 no.3
• /
• pp.268-277
• /
• 2017

Fusarium head bight (FHB) is a devastating disease on major cereal crops worldwide which causes primarily by Fusarium graminearum. Synthetic fungicides are generally used in conventional agriculture to control FHB. Their prolonged usage has led to environmental issues and human health problems. This has prompted interest in developing environmentally friendly biofungicides, including botanical fungicides. In this study, a total 100 plant extracts were tested for antifungal activity against F. graminearum. The crude extract of Pterocarpus santalinus heartwood showed the strongest antifungal activity and contained two antifungal metabolites which were identified as ${\alpha}$-cedrol and widdrol by GC-MS analysis. ${\alpha}$-Cedrol and widdrol isolated from P. santalinus heartwood extract had 31.25 mg/l and 125 mg/l of minimal inhibitory concentration against the spore germination of F. graminearum, and also showed broad spectrum antifungal activities against various plant pathogens. In addition, the wettable powder type formulation of heartwood extract of P. santalinus decreased FHB incidence in dose-dependent manner and suppressed the development of FHB with control values of 87.2% at 250-fold dilution, similar to that of chemical fungicide (92.6% at 2,000-fold dilution). This study suggests that the heartwood extract of P. santalinus could be used as an effective biofungicide for the control of FHB.

• Korean journal of applied entomology
• /
• v.56 no.3
• /
• pp.309-314
• /
• 2017

Sampling plan using yellow sticky traps for the major strawberry flying pests - western flower thrips Frankliniella occidentalis adults, cotton aphid Aphis gossypii alate and greenhouse whitefly Trialeurodes vaporarium adults was developed to determine the initial occurrence time. The analyzed trap data were obtained from three commercial strawberry greenhouses for the whole growing season (September to May of the following year) during 2013 to 2017 in Jeju province. Three flying pests showed the aggregated distribution patterns resulted from commonly used regression techniques - Taylor's power law and Iwao's patchiness regression. Taylor's power law was better description of mean-variance relationship of the western flower thrips and the cotton aphid than Iwao's patchiness regression, otherwise greenhouse whitefly was better described by Iwao's patchiness regression. There were highly significant correlated among mean density per trap, maximum density and proportion of traps with more than 10 individuals. To estimate 4.0 heads of mean density per trap, the minimum number of traps were required 13 traps for western flower thrips, 11 traps for cotton aphid and 10 traps for greenhouse whitefly. The sequential sampling plans at the fixed precision level 0.25 were developed using parameters of Taylor's power law for western flower thrips and cotton aphid, and of Iwao's patchiness regression for greenhouse whitefly.

• Korean journal of food and cookery science
• /
• v.31 no.4
• /
• pp.510-514
• /
• 2015

Various parts of Kkujippong (Cudrania tricuspidata Bureau) tree (leaves, stems, roots, and fruit) were evaluated to determine their properties. The general components of Kkujippong tree were fat 1.3-5.9 g /100 g, protein 6.3-18.7 g /100 g, and ash 2.8-9.0 g /100 g. The fiber content of the stem was the highest amount at 69.2 g/100 g, followed by protein in the roots (49.9), leaves (45.5), and fruit (15.6). In addition, Kkujippong tree was found to contain high concentrations of several minerals (Ca, Fe, Mg, Na, P, Zn) in the leaves. The total polyphenol content was significantly higher in the leaves than in other areas at 571.3 mg% (p<0.05). Electron donating ability was also highest in the leaves at 83.55% (p<0.05).

• 한국해양학회지
• /
• v.19 no.1
• /
• pp.44-55
• /
• 1984

Abundances of small fishes that utilized seagrass meadows of Redfish Bay, Texas, were analyzed quantitatively to determine monthly changes of this concentrated subtropical fish community during 1982-1983. an effective quantitative sampler, a 1-㎡ thrown cage, yielded a total of 10,223 fishes that comprised 40 species in 23 families, with average total densities about 15 fishes/㎡ in shoalgrass meadow and 6 fishes/㎡ in turtlegrass meadow. The darter goby, pinfish, code goby, and Gulf pipefish were the four most abundant species, and accounted for approximately 85% of the number of fish collected. However, the two different meadows had different relative abundances of fishes. The darter goby numerically dominated shallower shoalgrass meadow, while the pinfish and code goby were the commonest fishes in deeper turtlegrass meadow. Seasonal changes in both species composition and abundances of fish populations were major characteristics in these subtropical seagrass medows. Peak abundance of total fishes occurred during spring, with a secondary peak in fall. Lowest abundance of total fishes occurred in winter. Each abundant species showed its own seasonal abundance pattern, and had a peak abundance 1-3 months separated from other species, with some overlap of increased larval recruitment. Such distinct seasonal abundance patterns with different times of peak recruitment. Such distinct seasonal abundance patterns with different times of peak recruitment among fish species seem to permit use of the seagrass habitats with reduced, seasonal competition.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.4 s.74
• /
• pp.407-418
• /
• 2006

In this paper, an efficient yet accurate stress analysis based on the first-order shear deformation theory (FSDT) is presented. The transverse shear strain energy is modified via the mixed variational theorem, so that the shear correction factors are automatically involved in the formulation. In the mixed variational formulation, the transverse stresses are taken to be functions subject to variations. The transverse shear stresses based on an efficient higher order plate theory (EHOPT, Cho and Parmerter, 1993) are utilized and modified, while the transverse normal stress is assumed to be the third-order polynomial of thickness coordinates, which satisfies both zero transverse shear stresses and prescribed surface fractions in top and bottom surfaces. On the other hand, the displacements are assumed to be those of the FSDT Resulting strain energy expressions are referred to as an EFSDTM3D that stands for an enhanced first-order shear deformation theory based on the mixed formulation for three dimensional elasticity, The developed EFSDTM3D preserves the computational advantage of the classical FSDT while allowing for important local through-the-thickness variations of displacements and stresses through the recovery procedure that is based on the least square minimization of in-plane stresses. Comparisons of displacements and stresses of both laminated and sandwich plates using the present theory are made with the classical FSDT, three-dimensional exact solutions, and available data in the literature.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.516-525
• /
• 2020

The densities of aqueous solutions of the amphiphile 2-(2-hexyloxyethoxy)ethanol (C₆E₂) were measured at 279.15 K and 282.15 K by vibrating-tube densitometry. Then using the density data of the binary C₆E₂ (1)/water(2) system, the excess volumes and partial molar volumes were determined at various compositions. Excess volume V^E exhibits negative deviation for the whole region of composition, which implies relatively stronger attraction between molecules. At the C₆E₂ mole fraction of around 0.45, V^E was at its minimum. Partial molar volume ${\bar{V}}_1$ increases monotonously with the mole fraction x₁(=x) and ${\bar{V}}_2$ decreases with x. Any particular point in ${\bar{V}}_1$ and ${\bar{V}}_2$, which may point to molecular association, was unobserved.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.973-979
• /
• 2001

Tin-doped indium oxide (ITO) thin films were deposited using r.f. magnetron reactive sputtering and the electrical properties, such as the resistivity, carrier concentration and mobility, were investigated as a function of the sample position under a given magnetron sputtering condition. The nonhomogeneity of the electrical properties with the sample position was observed under a given magnetron sputtering condition. The resistivity of ITO thin film on the substrate which corresponded to the center of the target had a minimum value, 2∼4$\times$10$\^$-4/$\Omega$$.$cm, and it increased symmetrically when the substrate deviated from the center. The density measurement result also showed that ITO thin film deposited at the center has a maximum density of 7.0g/cm$^3$, which was a relative density of about 97%, and the density decreased symmetrically as the substrate deviated from the center. The nonhomogeneity of electrical properties with the deposition position could be explained with the incidence angle of the source beam alpha, which is related with an atomic self-shadowing effect. It was confirmed experimentally that the density in film affect both the carrier mobility and the conductivity. In the case where the density of ITO thin film is 7.0g/cm$^3$, the magnitude of the mean free path was identical with that of the grain size(the diameter of column). However, in the other cases, the mean free path was smaller than the grain size. These results showed that the scattering of the free electrons at the grain boundary is the major factor for the electrical conduction in ITO thin films having a high density, and there exists other scattering sources such as vacancies, holes, or pores in ITO thin films having a low density.ing a low density.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.315-315
• /
• 2010

결정질 실리콘을 포함하는 태양전지의 광전효율은 표면에 입사되는 태양광의 반사를 제외하면 흡수된 광자에 의해 생성되는 전자-정공쌍의 상대적인 비율인 내부양자효율에 의존하게 된다. 실제 생성된 전자-정공쌍은 기판재료의 결정상태와 전기광학적 물성 등에 의해 일부가 재결합되어 2차적인 광자의 생성이나 열로서 작용하고 최종적으로 전자와 정공이 완전히 분리되고 전극에 포집되어 실질적인 유효전류로 작용한다. 16% 이상의 고효율 결정질 실리콘 태양전지양산이 요구되고 있는 현실에서 광전효율 개선 위해 가장 우선적으로 고려되어야 할 변수는 입력 태양광스펙트럼에 대한 결정질 실리콘 표면반사율을 최소화하여 광흡수를 극대화하는 것이라 할 수 있다. 이의 해결을 위하여 대기와 실리콘표면 사이의 굴절률차이가 크면 클수록 태양광스펙트럼에 대한 결정질 실리콘의 광반사는 증가하기 때문에 상대적으로 낮은 굴절률의 $SiO_x$나 $SiN_x$와 같은 반사방지막을 광입력 실리콘표면에 증착하여 광반사율 저감공정을 적용하고 있다. 이와 더불어 결정질 실리콘표면을 화학적으로 혹은 플라즈마이온으로 50-100nm 직경의 바늘형 피라미드형상으로 texturing 함으로 광자들의 다중반사 등에 기인하는 광흡수율의 증가를 기대할 수 있기 때문에 태양전지효율 개선에 긍정적인 영향을 미치는 것으로 이해된다. 본 실험에서도 고효율 다결정 실리콘 태양전지 양산공정에 적용 가능한 ICP-RIE기반 결정질 실리콘표면에 대한 texturing 공정기술을 연구하였다. Double Langmuir 플라즈마 진단시스템(DLP2000)을 적용하여 사용한 $SF_6$와 $O_2$ 개스유량과 챔버압력, 플라즈마 파워에 따른 이온밀도, 전자온도, 포화이온전류밀도, 플라즈마포텐셜의 공간분포를 모니터링하였고 texturing이 완료된 시료에 대하여 A1.5G 표준태양광스펙트럼의 300-1100nm 파장대역에서 반사율을 측정하여 그 변화를 관찰하였다. 본 연구에서 얻어진 결과를 간략히 정리하면 Si texturing에 가장 적합한 플라즈마파워는 100W, $SF_6/O_2$ 혼합비는 18:22, 챔버압력은 30mtorr 등이고 이에 상응하는 플라즈마의 이온밀도는 $2{\sim}3{\times}10^8\;ions/cm^3$, 전자온도는 14~15eV, 포화전류밀도는 $0.014{\sim}0.015mA/cm^2$, 플라즈마포텐셜은 38~39V 범위 등이었다. 현재까지 얻어진 최소 평균반사율은 14.2% 였으며 최적의 texturing패턴 플라즈마공정 조건은 이온에 의한 Si표면원자들의 스퍼터링과 화학반응에 의한 증착이 교차하는 플라즈마 에너지 및 밀도 상태인 것으로 해석된다.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.4
• /
• pp.192-203
• /
• 2018

The surfgrass Phyllospadix iwatensis is native in the exposed rocky shores of the Northwestern Pacific Ocean. In Korea, P. iwatensis is mainly found on the rocky subtidal zone in the central eastern coast. In this study, to examine the ecological characteristics of P. iwatensis, we investigated changes in morphological characteristics, density, biomass, and leaf productivity as well as changes in the underwater irradiance and water temperature of its habitat monthly from August 2017 to July 2018. Underwater irradiance and water temperature showed clear seasonal changes; increases in spring and summer and decreases in fall and winter. Morphological characteristics, shoot density, biomass, and leaf productivities of P. iwatensis exhibited significant seasonal variations, increasing in winter and spring and decreasing in summer and fall months. P. iwatensis leaf productivities both per shoot and per unit area showed significant positive correlations with underwater irradiance. The average leaf productivity of P. iwatensis per area was $6.3{\pm}1.3g\;m^{-2}d^{-1}$, while minimum and maximum values were $2.4{\pm}0.3g\;m^{-2}d^{-1}$ in February 2018 and $16.4{\pm}4.4g\;m^{-2}d^{-1}$ in May 2018, respectively. The optimum water temperature for the growth of P. iwatensis in this study was between $12-13^{\circ}C$.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.556-562
• /
• 2018

Due to the enforcement of effluent water regulation the advance sewage treatment system is needed to retrofit and remodelling. In this case the most important issue is the effluent concentrations of TP and there are a lot of system to reduce its concentration. But biological treatment processes have many restrictions to enhance the removal efficiency of TP. In this study the efficient ECO operating condition to improve and retrofit biological sewage wastewater treatment system is as follow; 1) The treatment efficiency of BOD, TN and TP at the current density of $15mA/cm^2$ was higher than the treatment efficiency at $5mA/cm^2$ in the electrodes arranged with Al-SUS(Stainless Steel) regardless of the reaction time, The TP concentration was 0.1 mg/L or less. Especially, when the reaction time was maintained at 10 min, the TP concentration was 0.06 mg/L or less irrespective of the current density. 2) The change of TP concentration is not influenced by the change of current density and rather the concentration of treated water changes according to the reaction time. In the case of electro coagulation reaction, a few seconds to several minutes are required. However, the reaction time of electro coagulation and oxidation was studied to be more than 10 minutes. 3) As a result, it has been studied that the economical current density of the electro coagulation oxidation process for TN and TP treatment of domestic wastewater is $15mA/cm^2$ or less and the reaction time is 10 minutes.