• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.99-105
• /
• 2015

This paper deals with the mMMA (modified MMA) which possible to improving the convergence speed that employing the serial connecting form of two stage digital filter instead of signal filter of MMA adaptive equalizer without applying the variable step size for compensates the intersymbol interference by channel distortion in the nonconstant modulus signal. The adaptive equalizer can be implemented by signal digital filter using the finite order tap delay line. In this paper, the equalizer is implemented by the two stage serial form and the filter coefficient are updated by the error signal using the same algorithm of MMA in each stage. The fast convergence speed is determined in the first stage, and the residual isi left at the output of first stage output is minimized in the second stage filter. The same digital filter length was considered in single stage and two stage system and the performance of these systems were compared. The performance index includes the output signal constellation, the residual isi and maximum distortion, MSE that is measure of the convergence characteristics, the SER. As a result of computer simulation, mMMA that has a FIR structure of two stage, has more good performance in every performance index except the constellation diagram due to equalization noise and improves the convergence speed about 1.5~1.8 time than the present MMA that has a FIR structure of single stage.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.2
• /
• pp.437-444
• /
• 2017

Stress concentrations around discontinuities, such as a hole in cross section of a structural member, have great importance because the most materials failure around the region may be occurred. Stress on the point applied by concentrated load reaches much larger value than the average stress in structural member. In this paper, stress analysis was performed for the plate with a partial through-hole to find the difference of the principal stress distribution. The difference between maximum principal stress and minimum principal stress in photoelasticity is equal to the value obtained by multiplying the isochromatic fringe order by the fringe constant of the material divided by the distance through which the light passes, that is, the thickness of the specimen. Since the difference of principal stress is proportional to the photoelastic fringe order, the distribution of the principal stress difference by the finite element analysis can be compared with the photoelasticity experimental result. ANSYS Workbench, that is the finite element software, is used to compute the differences of principal stresses at the specific points on the measured lines. The computation values obtained by ANSYS are compared with the experimental measurements by photoelasticity, and two results are comparable to each other. In addition, the stress concentration factor is obtained using the stress distribution analyzed from the variation of hole depth. Stress concentration factor is increasing, as the depth of hole increase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1009-1019
• /
• 2009

In this research, various characteristics of South Korea's design flood have been examined by deriving appropriate design flood, using data obtained from careful observation of actual floods occurring in selected main watersheds of the nation. 19 watersheds were selected for research in Korea. The various characteristics of annual rainfall were analyzed by using a moving average method. The frequency analysis was decided to be performed on the annual maximum flood of succeeding one year as a reference year. For the 19 watersheds, tests of basic statistics, independent, homogeneity, and outlier were calculated per period of annual maximum flood series. By performing a test using the LH-moment ratio diagram and the Kolmogorov-Smirnov (K-S) test, among applied distributions of Gumbel (GUM), Generalized Extreme Value (GEV), Generalized Logistic (GLO) and Generalized Pareto (GPA) distribution was found to be adequate compared with other probability distributions. Parameters of GEV distribution were estimated by L, L1, L2, L3 and L4-moment method based on the change in the order of probability weighted moments. Design floods per watershed and the periods of annual maximum flood series were derived by GEV distribution. According to the result of the analysis performed by using variation rate used in this research, it has been concluded that the time for changing the design conditions to ensure the proper hydraulic structure that considers recent climate changes of the nation brought about by global warming should be around the year 2002.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.188-198
• /
• 2013

Maximally flat (MAXFLAT) half-band filters usually have wider transition band than other filters. This is due to the fact that the maximum possible number of zeros at $z={\pm}1$ is imposed, which leaves no degree of freedom, and thus no independent parameters for direct control of the frequency response. This paper describes a novel method for the design of FIR halfband filters with an explicit control of the transition-band width. The proposed method is based on a generalized Lagrange halfband polynomial (g-LHBP) with coefficients parametizing a 0-th coefficient $h_0$, and allows the frequency response of this filter type to be controllable by adjusting $h_0$. Then, $h_0$ is modeled as a steepness parameter of the transition band and this is accomplished through theoretically analyzing a polynomial recurrence relation of the g-LHBP. This method also provides explicit formulas for direct computation of design parameters related to choosing a desired filter characteristic (by trade-off between the transition-band sharpness and passband & stopband flatness). The examples are shown to provide a complete and accurate solution for the design of such filters with relatively sharper transition-band steepness than MAXFLAT half-band filters.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.2
• /
• pp.5-13
• /
• 2015

In the present study, the prediction methods of the crest settlement after impounding and the maximum internal settlement during dam construction were proposed through the analysis on settlement data at 38 monitored points of 36 Concrete-Faced Rockfill Dams (CFRDs). The results from this analysis provided that the crest settlement and the maximum internal settlement are increased in proportion to the dam height and the void ratio. However, the relationship between internal settlement and dam height for each void-ratio range plotted in semi-logarithmic scale is the nearly same. Also, the prediction of the crest settlement of the CFRD is possible through the maximum internal settlement during dam construction. In addition, it seems that the valley shape highly affects the dense dam body with high construction modulus. The results of this study will provide the useful tool for the design, construction and management of CFRDs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.66.2-66.2
• /
• 2010

미니탭(Minitab) 프로그램에 있는 실험계획법(Design of experiment)를 이용하여 박막실리콘 I-layer의 주효과 및 교호작용에 대한 연구를 실시하였다. I-layer의 주요 특성은 증착속도 및 전도도에 대하여 분석을 하였으며, 최종적으로 선택된 증착조건을 사용하여 비정질 실리콘 태양전지를 제조하여 확인 하였다. 실험설계는 2수준 5인자 완전설계요인법을 사용하였다. 분석결과 단막의 증착속도에 영향을 주는 주효과로는 Power와 E/S거리고 나타났으며, Power와 E/S거리, Power와 Pressure에서 큰 교호작용이 일어남을 확인 할 수 있었다. 암전도의 영향을 주는 주효과는 Sub. Temp.를 제외하고는 모두 영향을 주고 있었으며, 상당히 복잡한 교호작용을 이루고 있어 정확한 분석을 할 수는 없었다. 광전도도의 경우도 주효과에서 SiH4 flow rate를 제외하고는 모두 영향을 주고 있었으며, 복잡한 교호작용으로 정확한 분석이 어려웠다. 따라서 P-value를 분석하여 최종 R-제곱값이 증착속도는 97%이상의 높은 값을 얻었으나 전도도의 경우 최대차수 3차항으로 70~80%정도의 낮은 값을 얻었을 수 있었다. 낮은 값을 얻은 이유로는 실험설계시 몇몇 조건이 불안정한 plasma 상태로 인하여 전도도의 측정 편차가 커 분석오차가 높았을 것으로 추정된다. 암전도를 망소특성, 광전도도를 망대특성으로 광민감도 $10^5$으로 최적화 하여 비정질 태양전지를 만들어 평가한 결과 약 9%대의 광변환 효율을 얻을 수 있었으나 만족도 40%대의 낮은 값으로 향후 이와 관련한 더 정밀한 측정 및 분석이 요구된다.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.447-453
• /
• 2001

In this paper, we consider the scheduling of SE(switching element)-disjoint multicasting in photonic Banyan-type switching networks constructed with directional couplers. This ensures that at most, one connection holds each SE in a given time thus, neither crosstalk nor blocking will arise in the network. Such multicasting usually takes several routing rounds hence, it is desirable to keep the number of rounds(i.e., scheduling length) to a minimum. We first present the necessary and sufficient condition for connections to pass through a common SE(i.e., make crosstalk) in the photonic Banyan-type networks capable of supporting one-to-many connections. With definition of uniquely splitting a multicast connection into distinct subconnections, the crosstalk relationship of a set of connections is represented by a graph model. In order to analyze the worst case crosstalk we characterize the upper bound on the degree of the graph. The successor paper(Part II)[14] is devoted to the scheduling algorithm and the upper bound on the scheduling length. Comparison with related results is made in detail.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.131-139
• /
• 1997

Geopotential models were used to determine the reference surface in geoid modelling and until now, OSU91A model has been most widely used in the world. But what so called EGM96, GSFC/DMA geopotential model published in the latter half of the 1996 by GSFC/DMA project. In this paper, we intended to compare the results of spherical harmonic analyses using the both geopotential model and the spherical harmonic analyses performed up to degree and order 300 and the gravimetric geoidal heights considering gravity data on each $3'\times{3'}$ grid point in and around Korean peninsula. The results showed that the average geoidal height of study area computed from EGM96 is larger 0.40 m than that computed from OSU91A and the gravimetric geoidal heights us-ing EGM96 is larger 0.35 m than that using OSU91A model.

• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.190-200
• /
• 2001

This paper is addressed to welding defect feature vector selection and implementation method of welding defect classifier using fuzzy techniques. We compare IAV, zero-crossing number as time domain analysis, power spectrum coefficient as frequency domain, histogram as both domain for welding defect feature selection. We choose histogram as feature vector by graph analysis and find out that maximum frequent occurrence number and section of corresponding signal scale in relative histogram show obvious difference between normal welding and voiding with penetration depth defect. We implement a fuzzy welding defect classifier using these feature vector, test it to verify its effectiveness for 695 welding data frame which consist of 4000 sampled data. As result of test, correct classification rate is 92.96%. Lab experimental results show a effectiveness of fuzzy welding defect classifier using relative histogram for practical Laser welding monitoring system in industry.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.17-24
• /
• 2001

Two-dimensional binary-phase diffraction gratings which can be employed to fabricate two- and three-dimensional periodic structures are designed and analyzed using rigorous coupled-wave analysis. These gratings serve as phase-masks which generate several diffracted waves from a normally incident beam and thus can produce a periodic interference pattern in space via nearfield holography. The properties of the diffracted beams can be controlled by varying the polarization and wavelength of the incident beam, surface-profile, groove depth and duty cycle of the mask. For the two-dimensional structure, optimum results can be obtained when the diffraction efficiency of the zero-order beam is minimized while that of the first-order maximized. On the other hand, when the diffraction efficiency of the zero-order is appreciable or even greater than other orders, we can obtain a variety of three-dimensional interference patterns which may be used to fabricate photonic crystals of tetragonal-body-centered and hexagonal structures in a submicron scale. scale.