• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.252-259
• /
• 2005

Single crystal $CuGaSe_2$ layers were grown on thoroughly etched semi-insulating CaAs(100) substrate at $450^{\circ}C$ with hot wall epitaxy (HWE) system by evaporating $CuGaSe_2$ source at $610^{\circ}C$. The crystalline structure of the single crystal thin films was investigated by the photoluminescence (PL) and double crystal X-ray diffraction (DCXD). The carrier density and mobility of single crystal $CuGaSe_2$ thin films measured with Hall effect by Van der Pauw method are $4.87{\times}10^{17}cm^{-3}$ and $129cm^2/V{\cdot}s$ at 293 K, respectively. The temperature dependence of the energy band gap of the $CuGaSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=1.7998eV-(8.7489{\times}10^{-4}eV/K)T^2/(T+335K)$. The voltage, current density of maxiumun power, fill factor, and conversion, efficiency of $n-CdS/p-CuGaSe_2$, heterojunction solar cells under $80mW/cm^2$ illumination were found to be 0.41 V, $21.8mA/cm^2$, 0.75 and 11.17%, respectively.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.107-114
• /
• 2018

Since China's economic reform in 1978, international trade has enormously flourished and the port industry is reckoned as a key factor contributing to this growth. This study examines the Bohai Rim port group in the scope of top three largest ports Qingdao, Dalian and Tianjin. By utilizing indicators including concentration ratio (CR), Herfindahl-Hirschman index (HHI), the Gini coefficient and the Lorenz curve as well as shift-share analysis (SSA), the concentration level of this port group in the period 2004-2016 is discussed. As a results, CR demonstrates a decrease during the studied period with a minor fluctuation, and HHI index shows a trend of deconcentration with Bohai Rim port group. In addition, SSA indicates that during the period 2004-2016, the overall shift index of Qingdao port was -1.371 meanwhile with Tianjin and Dalian port were 0.118 and 1.252 in turn. These results suggest that the growth in regional influence of Tianjin and Dalian ports would motivate to the deconcentration pattern in Bohai Rim region. The findings assist decision makers and scholars to obtain knowledge about the port development this region. Considering the geographic position of these three ports as the gate of northeast China, it is suggested that these three ports could explore their advantages and cooperate with the small ports in the surrounding area to enhance their influences in the future study.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.6 no.1
• /
• pp.73-87
• /
• 1996

The mechanical properties of 2D ceramic composites fabricated bythe newly developed powder infiltration and subsequent multiple impregnation process were characterised by both 3-point flexure and tensile tests. These tests were performed with strain gauge and acoustic emission instrument. The woven fabric composites used for the test have the basic combinations of $Al_{2}$$O_{3}$ fabric/$Al_{2}$$O_{3}$ and SiC fabric (Tyranno)/SiC. Uniaxially aligned SiC fibre(Textron SCS-6)/SiC composites were also tested for comparison, The ultimate flexural strength and first-matrix cracking stress of SiC fabric/SiC composite with 73% of theoretical density were about 300 MPa and 77 MPa respectively. However, the ultimate tensile strengths of composite were generally one third of flexural strengths, and first-matrix cracking stress in a tension test was also much lower than the value obtained from flexure test. The lower mechanical properties measured by tension test were analysed quantitatively bythe differences in stressed volume using Weibull statistics. This showed that the ultimate strength and the firs-tmatrix cracking stress of woven laminate composites were mainly determined bythe gauge length of fibres and the stressed volume of matrix respectively. Incorporation of SiC whiskers into the matrix increased first-matrix cracking stress by increasing the matrix failure strain of composites.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.65-78
• /
• 2009

The most commonly adopted approach to find valuable information from tree data is to extract frequently occurring subtree patterns from them. Because mining frequent tree patterns has a wide range of applications such as xml mining, web usage mining, bioinformatics, and network multicast routing, many algorithms have been recently proposed to find the patterns. However, existing tree mining algorithms suffer from several serious pitfalls in finding frequent tree patterns from massive tree datasets. Some of the major problems are due to (1) modeling data as hierarchical tree structure, (2) the computationally high cost of the candidate maintenance, (3) the repetitious input dataset scans, and (4) the high memory dependency. These problems stem from that most of these algorithms are based on the well-known apriori algorithm and have used anti-monotone property for candidate generation and frequency counting in their algorithms. To solve the problems, we base a pattern-growth approach rather than the apriori approach, and choose to extract maximal frequent subtree patterns instead of frequent subtree patterns. The proposed method not only gets rid of the process for infrequent subtrees pruning, but also totally eliminates the problem of generating candidate subtrees. Hence, it significantly improves the whole mining process.

• Journal of the Korean Vacuum Society
• /
• v.20 no.1
• /
• pp.42-49
• /
• 2011

We deposited $SiN_x$ thin films by using PECVD technique at $200^{\circ}C$ with various flow ratios of the $SiH_4/N_2$ gases. The photoluminescence measurements revealed that the maximum emission wavelength shifted to long wavelength as the ratio increased, however, positions of the several peak wavelengths, such as 1.9, 2.2, 2.4, and 3.1 eV, were independent on the ratio. Changes of the photoluminescence spectra were measured in the $N_{2}-$, $H_{2}-$, and $O_2$-annealed films. The luminescence intensities increased after the annealing process. In particular, the maximum emission wavelength shifted to short wavelength after $H_{2}-$ or $O_2$-annealing. But there were still several peaks on the spectra of all annealed films, several peak positions remained to be unchanged after the annealing. As for the light emission mechanism, we have considered the defect states of the Si- and N- dangling bonds in the $SiN_x$ energy gap, so that the energy transitions from/to the conduction/valence bands and the defect states in the gap were attributed to the light emission in the $SiN_x$ films. The experimental results point to the possibility of a Si-based light emission materials for flexible Si-based electro-optic devices.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2006.05a
• /
• pp.337-342
• /
• 2006

호박 분말을 첨가한 라면의 $\beta$-carotene의 함량 정량 결과 호박분말을 첨가할수록 $\beta$-carotene의 함량은 증가하였다. 총균수 검사에서는 제조 후 44일까지는 균이 검출되지 않았으며 58일째부터 호박 분말의 첨가량이 증가함에 따라서 그 총균수의 검출이 증가함을 알 수 있으며 이는 공기 중의 미생물의 오염과 상온 상태의 호박에 함유되어 있는 여러 종류의 영양성분 등에 의하여 균이 성장할 수 있는 최대의 생육 조건에 의한 것으로 판단된다. 관능 검사에서 가장 선호도가 좋았던 호박 분말을 2.5% 첨가한 라면은 과산화물가가 기준치에 도달하는 기간을 120일(약 4개월)로 추측할 수 있었다. TBA value의 실험에서는 2.5% 호박 분말이 첨가된 라면의 산패는 대조군과 큰 차이를 보이지 않으므로 이것을 줄이기 위해 완전한 밀봉 포장이 이루어진다면 산패의 속도를 줄일 수 있을 것으로 사료된다. 호박을 첨가한 라면의 저장 안정성에 대한 연구 결과 호박을 첨가하면 할수록 라면의 저장성이 떨어진다고 결론을 내릴 수 있다. 그러한 원인으로는 호박에 함유되어 있는 여러 종류의 영양성분과 라면과의 결합시 호박에 함유된 $\beta$-carotene 이외의 다른 물질들에 의해서 저장성 및 안정성에 영향을 미친 것으로 판단된다. 또한 보관 시의 문제점으로써 포장상태를 들 수 있는데 포장상태가 완전한 밀봉상태가 아닌 비닐팩을 이용하였다는 것이다. 이는 호박 라면의 공기와의 접촉을 촉진한 계기가 되었으며 그로 인하여 여러 가지 미생물들의 활성이 활발히 이루어졌으며 또한 지질의 산패를 가속화시킨 결과라고 생각된다. 따라서 호박 라면 제조시 이러한 공기와의 접촉을 차단시킬 수 있는 포장재료를 선택해야 될 것으로 사료된다.0.05), 맛, 연도, 다즙성 및 전체적인 기호성은 유의한 차이가 없었다.자체를 악하다고 볼 수 없고 더구나 구원을 이 세상에서의 이탈로 볼 수 없다. 진정한 구원이란 원래 하나님이 보시기에 아름다웠던 그 세상으로의 회복을 포함한다. 이런 면에서 하나님 주권 신앙 하에서 구원이란 전 인격적인 구원, 전 우주적인 구원이 된다. 그렇기 때문에 성도는 세상의 삶과 학문, 예술, 정치, 경제, 사회를 포함한 모든 분야를 하나님의 뜻 가운데서 그 원래의 목적에 부합할 수 있도록 회복시키는 일에 적극 참여해야 한다.자체가 이를 주도하기는 사실 어려움이 있다. 그리고 대형유통점이 영업행위를 영업시간제한에서부터 출점제한에 이르기까지 규제하는 건은 심사숙고하여야 한다. 대형유통점이 국가경제 및 지역사회에 미치는 영향이 부정적인가 긍정적인가에 대해 국내외 학계와 업계에서 여전히 많은 논란이 있기 때문이다. 정부와 지자체에 의한 시장개입은 반드시 필요한 경우에 한해 합당한 방법에 의해 이루어져야 한다. 대형유통점에 대한 규제는 지역사회에 미치는 영향을 다면적으로 평가한 결과에 근거하여 이루어져야 할 것이다. 대부분의 지자체는 체계적인 평가시스템과 객관적인 통계 자료를 갖고 있지 못한 실정이다. 향후 가장 시급한 과제는 시장개방 이후 지난 10년간 대형유통점이 지역사회에 미친 영향에 관한 광범위한 통계자료를 수집하고 이를 체계적으로 분석하여 정책방향을 올바르게 설정하는 것이라 할 수 있다.i와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다., A2-1, B1-1, B2-1의 경우, 강우 일수 감소 이전과 연 유출량 변화는 거의 없었으나, 유사량과 영양물질 부하량은 다소

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.401-406
• /
• 2012

Shanghai Stock Exchange is the largest stock exchange of emerging markets that there were listed firms 905, listed securities 1,537, listed stocks 949, total number of listed stocks 2 trillion 2000 billion shares. There is more development that is expected to occur in the future. The purpose of this study is to find determinants of capital structure to listed manufacturing firms in Shanghai Stock Exchange using multiple regression. Conclusions of this study are summarized as follows. First, firm size is positively related to debt ratio significantly at 1% significance level.. Second, the profitability is negatively related to debt ratio significantly at 1% significance level. Third, the growth ability is positively related to debt ratio significantly at 1% significance level. fourth, cash flow, the largest shares ownership, negotiable shares ratio are negatively related to debt ratio but they are not significant statistically. The result of this study provides information for investors and can be utilized to improvement of financial structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.10
• /
• pp.1179-1185
• /
• 2011

Cold and hot-rolled carbon steel sheets are commonly used in railroad cars or commercial vehicles such as the automobile. The sheets used in these applications are mainly fabricated by spot welding, which is a type of electric resistance welding. However, the fatigue strength of a spot-welded joint is lower than that of the base metal because of high stress concentration at the nugget edge of the spot-welded part. In particular, the fatigue strength of the joint is influenced by not only geometrical and mechanical factors but also the welding conditions for the spot-welded joint. Therefore, there is a need for establishing a reasonable criterion for a long-life design for spot-welded structures. In this thesis, ${\Delta}P-N_f$ relation curves have been used to determine a long-life fatigue-design criterion for thin-sheet structures. However, as these curves vary under the influence of welding conditions, mechanical conditions, geometrical factors, etc. It is very difficult to systematically determine a fatigue-design criterion on the basis of these curves. Therefore, in order to eliminate such problems, the welding residual stresses generated during welding and the stress distributions around the weld generated by external forces were numerically and experimentally analyzed on the basis of the results, reassessed fatigue strength of gas welded joints.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.68-73
• /
• 1984

Modern society has required to make maximization of the public benefit for forests. The increased public interest and concern for forests have been resulted from high mechanization of industrial activity associated with development of national economy, expansion of urban population, and necessity of more Leisure time caused by improvement of standard living condition. Attention shifted to the managing of forest (and on the basis of multiple use concept, achieving both public benefit and economic function. Management standards and control must be strengthened on all operations to encompass the various forest resources; outdoor recreation, watersheds, wildlife and fisheries, timber, rangeland, and aesthetic values. Particularly, in order to determine public interests and balance the needs in relation to available resources, more research is essential to develope and activate quantification of these intangeble forest resource values.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.313-320
• /
• 2008

A typical software development life cycle consists of a series of phases, each of which has some ability to insert and detect defects. To achieve desired quality, we should progress the defect removal with the all phases of the software development. The well-known model of phase-based defect profile is Gaffney model. This model assumes that the defect removal profile follows Rayleigh curve and uses the parameters as the phase index number. However, these is a problem that the location parameter cannot present the peak point of removed defects when you apply Gaffney model to the actual situation. Therefore, Gaffney model failed to represent the actual defect profile. This paper suggests two different models: One is modified Gaffney model that introduce the parameter of Putnam's SLIM model to replace of the location parameter, the other is the growth function model because the cumulative defect profile shows S-shaped. Suggested model is analyzed and verified by the defect profile sets that are obtained from 5 different software projects. We could see from the experiment, the suggested model performed better result than Gaffney model.