• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.47-52
• /
• 2010

In this paper, a phase-locked loop with a self-noise suppressing voltage controlled oscillator to improve a phase noise characteristic has been proposed. The magnitude of the proposed transfer function is maximum 25dB lower than that of a conventional transfer function around a bandwidth. The proposed PLL has been designed based on a 1.8V $0.18{\mu}m$ CMOS process and proved by HSPICE simulation.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.315-319
• /
• 2012

The aim of this study was to develop a signal process circuit for a position sensitive avalanche photodiode detector. The circuit parts consisted of amplification, differential and peak/hold circuit. This research was the baseline to develop highly compact radiation detector. The signal was amplified by an amplification chip and its shape was changed in a differential circuit to minimize the pulse tailing. The peak/hold circuit detect the peak of the signal from the differential circuit and hold the amplitude of the peak for data acquisition. In order to test the intrinsic function of the circuit, the input signal was transmitted from a commercial pulse generator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11C
• /
• pp.1052-1057
• /
• 2006

The implement the adaptive partial response maximum likelihood (PRML) detector with tilt analyzer for asymmetric high-density optical storage system. For the estimation of disc tilt, we exploit spc patterns in each data frame. Because of using the ROM table to renew the coefficients of equalizer and reference values of branches, the complexity of the hardware is reduced. The proposed PRML has been designed and verified by VerilogHDL and synthesized by the Synopsys Design Compiler with Hynix $0.35{\mu}m$ STD cell library. In the result, the total gate count is 35K, and the maximum operating frequency is 140MHz.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.76-82
• /
• 2011

Purpose: Lymphoscintigraphy is absolutely being used standard examination in lymphatic diagnosis, evaluation after treatment, and it is useful for lymphedema to plan therapy. In case of lymphoscintigraphy of lower-extremity lymphedema, it had an effect on results if patients had not pose same position on the examination of 1 min, 1 hour and 2 hours after injection. So we'll study the methods to improve confidence with minimized quantitative analysis errors by influence factors. Materials and Methods: Being used the Infinia of GE Co. we injected $^{99m}Tc$-phytate 37 MBq (1.0 mCi) 4 sylinges into 40 people's feet hypodermically from June to August 2010 in Samsung Medical Center. After we acquired images of fixed and unfixed condition, we confirmed the count values change by attenuation of soft tissue and bone according to different feet position. And we estimated 5 times increasing 2 cm of distance between $^{99m}Tc$ point source and detector each time to check counts difference according to distance change by different feet position. Finally, we compared 1 and 6 min lymphoscintigraphy images with same position to check the effect of quantitative analysis results owing to difference of amounts of movement of the $^{99m}Tc$-phytate in the lymphatic duct. Results: Percentage difference regarding error values showed minimum 2.7% and maximum 25.8% when comparing fixed and unfixed feet position of lymphoscintigraphy examination at 1 min after injection. And count values according to distance were 173,661 (2 cm), 172,095 (4 cm), 170,996 (6 cm), 167,677 (8 cm), 169,208 counts (10 cm) which distance was increased interval of 2 cm and basal value was mean 176,587 counts, and percentage difference values were not over 2.5% such as 1.27, 1.79, 2.04, 2.42, 2.35%. Also, Assessment results about amounts of movement in lymphatic duct within 6 min until scanning after injection showed minimum 0.15%, and maximum 2.3% which were amounts of movement. We can recognize that error values represent over 20% due to only attenuation of soft tissue and bone except for distance difference (2.42%) and amounts of movement in lymphatic duct (2.3%). Conclusion: It was show that if same patients posed different feet position on the examination of 1 min, 1 hour and 2 hours after injection in the lymphoscintigraphy which is evaluating lymphatic flow of patients with lymphedema and analyzing amount of intake by lymphatic system, maximum error value represented 25.8% due to attenuation of soft tissue and bone, and PASW (Predictive Analytics Software) showed that fixed and unfixed feet position was different each other. And difference of distance between detector and feet and change of count values by difference of examination beginning time after injection influence on quantitative analysis results partially. Therefore, we'll make an effort to fix feet position and make the most of fixing board in lymphoscintigraphy with quantitative analysis.

• Journal of Broadcast Engineering
• /
• v.17 no.3
• /
• pp.480-490
• /
• 2012

When interpolating chrominance signal, the H.264/AVC standard uses linear interpolation. In this paper, we suggest more effective method that uses a high precision filter, 6-tap FIR filter, 2-tap linear filter for chroma interpolation. The experimental result shows that the proposed method achieves the BD-Rate decrease without the PSNR decrease compared with Jm11.0kta2.7. The maximum BD-rate improvements on Y component are 1.3%, those of Cb and Cr components are 19.8%, 25.0%, respectively. The average BD-rate improvements on Y component are 0.5%, those of Cb and Cr components are 6.1%, 6.9%, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.464-464
• /
• 2012

본 연구에서는 DBD (Dielectric Barrier Discharge)방식을 통해 발생된 대기압 plasma를 이용한 Photoresist (PR) Ashing에 관한 연구를 하였다. 사용된 DBD 반응기는 기존의 blank planar plate 형태의 Power가 인가되는 anode 부분과 Dielectric Barrier 사이 공간을 액상의 도전체로 채워 넣은 형태의 전극이 사용 하였으며, 인가 Power는 40 kHz AC 최대 인가 전압 15 kV를 사용 하였고(본 연구에서 인가 power는 30 KHz,전압 14 KV를 고정시킴) 플라즈마를 발생시 라디칼의 활성화를 유지하기 위해 전극 온도가 $180^{\circ}C$ 정하였다. Feeding 가스는 N2, 반응가스로는 CDA(Clean Dry Air), SF6와 CF4가스를 사용 하였으며 모든 공정은 In-line type으로 시편을 처리 하였다. CDA ratio의 경우에 질소대비 0.2%때 이송속도 30 mm/sec 1회 처리 기존 PR ashing은 최대 $320{\AA}$의 ashing 두께를 얻을 수 있었다. SF6와 CDA가스를 같이 반응하는 경우 ratio는 CDA : SF6 = 0.6% : 0.6%에서 PR ashing rate이 $841{\AA}/pass$의 값을 얻을 수 있었고, CDA가스만 첨가하는 경우보다 약2.6배 증가함을 관찰할 수 있었다. CF4 가스를 사용하는 경우 ratio는 CDA : CF4 = 0.2% : 0.2%에서 PR ashing rate이 $687{\AA}/pass$의 값을 얻을 수 있으며 CDA가스만 첨가하는 경우보다 약 2.1배 증가함을 관찰할 수 있었다. 그리고 PR ashing rate가 가스첨가종류와 비율에 따라서 변화함을 관찰하였고 최적조건을 찾기 위해 연구를 진행하였다. 추후 PR ashing rate가 향상을 하기 위해 가스혼합비율 및 stage 온도등 조건을 조절하여 공정최적조건을 얻기 위해 연구를 진행하였다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.2
• /
• pp.191-195
• /
• 2008

This paper proposes a technique for improving IEEE 802.11e EDCA's performance by dynamically adjusting each class's contention window size based on each class's traffic amount. For providing differentiated service differently from 802.11, 802.11e EDCA maintains four classes each of which specifies different static minimum and maximum contention window sizes. Since the initial window sites significantly affect the 802.11e performance, several window adjustment schemes have been proposed. One of the schemes known as CWminAS (CWmin Adaptation Scheme) dynamically and synchronously determines the four windows' site based on the periodically measured collision rate. This method, however, can lower the send probability of high priority classes since it can't differentiate their collisions from those of low priority classes, leading to the channel underutilization. For solving this problem, we propose ACATICT(Adaptive Contention-window Adjustment Technique based on Individual Class Traffic) algorithm which adapts each class window size based on each individual collision rate rather than one average collision rate. Our simulation experiments show that ACATICT achieves better utilization by around 10% at maximum.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.14-18
• /
• 1997

Using holographic interferometry, strain distributions for a cantilever beam subjected to the eccentric force can be analysed. Holographic fringe pattern shows inclined straight lines for the composite deformation of bending and torsion. Using these inclinations of the fringe pattern, 3rd order polynomial of plane displacements can be determined without difficulty. As the result, both of axial and shear strain distribution can be obtained from the second partial derivatives of this polynomial. These results agree well with FEM.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.3
• /
• pp.225-240
• /
• 2006

In order to calculate bending moments of rectangular plates with three edges clamped the other free subjected to both a uniform load and a triangular load, a finite difference equation for the non-dimensional governing equation are presented and numerical solutions with different aspect ratios and/or number of grid points are analyzed. The finite difference solutions are obtained by use of grid points up to 11,520 and the optimum grid points according to aspect ratios of the plate are presented as well. The obtained numerical solutions are shown to satisfy the given x moment boundary condition at the free edge, which can not be satisfied in Levy's analytical solutions and peculiar behaviour of the calculated moments is observed around the corners between the free edge and fixed ones. The numerical solutions of bending moments subjected to both a uniform load and a triangular load are compared with the corresponding analytical solutions which are shown in very good agreement on the solution domain except the neighborhood of the free edge.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.65-71
• /
• 2018

Purpose : Standardized pillow may not support patient's individual cervical spine thoroughly when head and neck radiation therapy with $Tomotherapy^{(R)}$. Therefore, the purpose of this study was to make a comparative analysis for the difference of using standardized pillow only and using customized cervical spine immobilizer with standardized pillow. Materials and Methos : The head and neck cancer patients who are treated image-guided radiation therapy(IGRT) with $Tomotherapy^{(R)}$ were divided into two groups, 20 patients using standardized pillow only, and 20 patients using customized cervical spine immobilizer with standardized pillow. We achieved 20 mega-voltage computed tomography(MVCT) image per patient, compared curvature of the cervical spine in MVCT with curvature of the cervical spine in CT-simulation. Results : Results of comparative analysis were curvature consistency 95.9 %, maximum error of distance 41.9 mm, average distance error per fractionation 19.4 mm, average standard deviation 1.34 mm in case of using standardized pillow only, curvature consistency 98.9 %, maximum error of distance 12.9 mm, average distance error per fractionation 5.8 mm, average standard deviation 0.59 mm in case of using customized cervical spine immobilizer with standardized pillow. Conclusion : Using customized cervical spine immobilizer shows higher reproducibility and low distance error, therefore customized cervical spine immobilizer could be useful for head and neck cancer patients who need radiation therapy.