• Title/Summary/Keyword: 최대값과 최소값분포

Search Result 175, Processing Time 0.026 seconds

Estimation of Climatological Standard Deviation Distribution (기후학적 평년 표준편차 분포도의 상세화)

  • Kim, Jin-Hee;Kim, Soo-ock;Kim, Dae-jun
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.19 no.3
    • /
    • pp.93-101
    • /
    • 2017
  • The distribution of inter-annual variation in temperature would help evaluate the likelihood of a climatic risk and assess suitable zones of crops under climate change. In this study, we evaluated two methods to estimate the standard deviation of temperature in the areas where weather information is limited. We calculated the monthly standard deviation of temperature by collecting temperature at 0600 and 1500 local standard time from 10 automated weather stations (AWS). These weather stations were installed in the range of 8 to 1,073m above sea level within a mountainous catchment for 2011-2015. The observed values were compared with estimates, which were calculated using a geospatial correction scheme to derive the site-specific temperature. Those estimates explained 88 and 86% of the temperature variations at 0600 and 1500 LST, respectively. However, it often underestimated the temperatures. In the spring and fall, it tended to had different variance (e.g., increasing or decreasing pattern) from lower to higher elevation with the observed values. A regression analysis was also conducted to quantify the relationship between the standard deviation in temperature and the topography. The regression equation explained a relatively large variation of the monthly standard deviation when lapse-rate corrected temperature, basic topographical variables (e.g., slope, and aspect) and topographical variables related to temperature (e.g., thermal belt, cold air drainage, and brightness index) were used. The coefficient of determination for the regression analysis ranged between 0.46 and 0.98. It was expected that the regression model could account for 70% of the spatial variation of the standard deviation when the monthly standard deviation was predicted by using the minimum-maximum effective range of topographical variables for the area.

Study of Acoustic Streaming at Resonance by Longitudinal Ultrasonic Vibration Using Particle Imaging Velocimetry (입자 영상 유속계를 이용한 초음파 수직진동에 의해 유도된 공진상태에서의 음향유동에 관한 연구)

  • 노병국;이동렬
    • The Journal of the Acoustical Society of Korea
    • /
    • v.23 no.5
    • /
    • pp.340-352
    • /
    • 2004
  • Acoustic streaming induced by the microscopic longitudinal ultrasonic vibration at 28.5 ㎑ is visualized between the quiescent glass plate and ultrasonic vibrator by particle imaging velocimetry(PIV) using laser. To investigate the augmentation of air flow velocity of acoustic streaming. the velocity variations of air streaming between the stationary plate and ultrasonic vibrator are measured in real-time. It is experimentally investigated that the magnitude of the acoustic streaming dependent upon the gap between the ultrasonic vibrator and stationary p1ate results in the variations of the average velocity fields as a outcome of the bulk air flow caused by the ultrasonic vibration. In addition. maximum acoustic streaming velocity exists at resonant gap. 18mm that is one of the resonant gaps (H=18, 24, 30, 36㎜) at which resonance occurs. The variation of the local maximum turbulent intensity with axial direction appear to reveal the value of 8%∼70% dependent upon the gap between the quiescent glass plate and ultrasonic vibrator. Shearstress is also maximized at the center region of the vibrator and the vorticity is also maximum and minimum in the neighborhood of the center of the vibrator at which the local maximum turbulent intensity and shear stress exist.

Estimating plot-level volume using LiDAR-extracted height distributional parameters (항공 LiDAR의 높이분포변수를 이용한 임분재적추정에 관한 연구)

  • Kwak, Doo-Ahn;Lee, Woo-Kyun;Cho, Hyun-Kook
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2010.09a
    • /
    • pp.134-141
    • /
    • 2010
  • 임분 단위의 재적 및 생체량은 LiDAR 자료의 높이 분포변수들로부터 추정될 수 있다. LiDAR 자료의 높이 분포변수들은 재적을 측정하는 임분고(stand height)와 임분평균 지하고(mean crown base height), 그리고 수관형태에 따른 평균수관장(mean crown depth) 등의 변수와 직 간접적인 연관성이 있다. 그러므로, 본 연구에서는 잣나무림의 샘플지역에서 반사된 LiDAR 자료의 높이분포변수를 이용하여 임분단위의 수간재적을 추정한 다음, 앞 세부연구에서 수행한 방법을 이용하여 임분의 생체량을 추정하였다. 변수는 임분 내에서 반사되는 LiDAR 자료의 평균높이, 최대 최소높이, 높이값들의 표준편차, 변이계수, 첨도, 왜도, 식생반사비율, 10분위 높이자료와 강도데이터의 기술통계량 등을 사용하였다. 그리고, 최종적인 임분수간재적은 다중회귀분석을 통하여 수행되었다. 다중회귀분석을 통하여 각 변수들은 임분수간재적과 가장 관련있는 2~3개의 변수들로 추려졌으며, 추정된 회귀식의 결정계수는 0.66으로 분석되었다. 또한 유보표본을 이용하여 검증한 결과의 결정계수는 0.59로 분석되어 LiDAR 자료의 높이분포변수들은 임분의 재적을 비교적 잘 설명할 수 있음이 밝혀졌다.

  • PDF

The Economic Analysis on Traffic Safety Facility along the Inland Waterway Using Probabilistic Simulation -Focusing on the section between Phnom Penh and Chong Kneas port in Cambodia- (확률론적 시뮬레이션을 이용한 내륙수로 교통안전시설의 경제성 분석 -캄보디아의 프롬펜과 총크니아스항 구간을 대상으로-)

  • Kim, Jung-Hoon
    • Journal of Korea Port Economic Association
    • /
    • v.25 no.4
    • /
    • pp.165-182
    • /
    • 2009
  • This study analyzed the economic analysis on the Cambodian inland waterway from Phnom Penh to Chong Kneas. The social discount rate of 3.5% was applied for the cost and benefit of projects and converted to the current values in 2009. The benefits were supposed as the triangle distribution with minimum, mode, and maximum value corresponding to pessimistic, moderate and optimistic prospect separately. And the distributions of costs were the normal. As the result of probabilistic simulations, the average of B/C for scenario A showed relatively the highest with 0.25 and its 90% confidence interval 0.16~0.35. The average B/C of scenario B is 0.10 with the 90% confidence interval 0.06~0.13 and the one of scenario C is 0.15 with 90% confidence interval 0.12~0.19. Therefore it was concluded as low economic feasibility to install inland waterway aids to navigation along the surveyed waterway. However, the performance of the project should be determined by its political analysis as well as the economic.

  • PDF

혈관내벽에 홀뮴-166 방사선 분할 조사시 흡수선량 분포

  • 조철우;윤석남;윤준기;이명훈;탁승재;최소연;박경배
    • Proceedings of the Korean Society of Medical Physics Conference
    • /
    • 2003.09a
    • /
    • pp.70-70
    • /
    • 2003
  • 경피적관상동맥성형술(CPTCA)이나 스텐트삽입술 후에 발생하는 재협착을 방지하기 위한 방사선을 조사하는 방법 중에 베타 입자를 방출하는 액체 선원을 catheter풍선 내에 넣어 일정 시간 방사선 조사 시키는 방법이 있다. 조사시킬 혈관의 길이가 길어 한번의 방사선 조사가 어려울 경우 영역을 분할하여 두 번에 나누어 조사할 경우가 있다. 조사영역의 겹치는 부근의 흡수선량이 고선량이나 저선량이 되는가를 알기 위하여 두 풍선간의 접근 거리에 따른 혈관내벽의 흡수선량 분포를 알아보았다. 풍선내의 액체 선원은 Ho-l66을 이용하였고 Ho-l66의 물리적 반감기는 26.8시간이고 최대에너지 1.85 MeV, 평균에너지 0.69 MeV와 최대에너지 1.77 MeV, 평균에너지 0.65 MeV를 갖는 베타 입자를 방출한다. Ho-l66 의 방사선 흡수선량을 측정하기 위하여 GafChromic 필름(Nuclear Associates, Carle Place, NY, USA)을 이용하였고, 방사선이 조사된 필름의 optical density는 videodensitometer(Wellhofer, Schwarzen-bruck, Germany)를 이용하여 값을 읽었다. Catheter 풍선은 직경이 3 mm 이고 길이가 20 mm인 것을 이용하였다. 혈관 내벽의 최대 흡수선량을 표준화하여 겹치는 부분의 흡수선량 분포를 접근 거리에 따라 구하였다. 또한 몬테카를로 시abf레이션으로 확인하였다. 두 풍선의 겹치는 부근의 선량 분포는 풍선 중앙에서 중앙사이의 거리가 21 mm 일 때 중앙에서 20% 증가하였고, 거리가 22 mm일 때와 23 mm일 때 각각 10%와 40%의 감소를 보였다. 풍선 도자의 풍선 안에 베타입자 방출 액체 선원을 넣어 혈관내벽에 방사선 조사하는 방법은 비정거리가 짧아 혈관 내벽 부근에만 방사선을 조사시키고 그 외 중요 장기에는 영향을 덜 미치는 장점이 있다. 그러나 혈관 내벽 표면으로 부터의 거리에 따라 흡수선량이 급격히 떨어지는 분포를 이루기 때문에 두 개의 풍선이 겹치는 부근의 흡수선량은 아주 작은 접근 거리에서도 급격한 변화를 보였다. 따라서 시술 중에 겹치는 부분을 아주 적게 분할하여 정확하게 차례차례로 조사시키기 위해서는 신중한 거리 조정을 하여야 한다.

  • PDF

Relative comparison studies on daily record high maximum temperatures compared to daily record low minimum temperatures in the Korea (우리나라 일 최고기온과 일 최저기온 극값 발생빈도의 상대 비교 연구)

  • Cho, Seon-Ju;Park, Moo-Jong;Kim, Sang-Dan
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.361-361
    • /
    • 2011
  • 우리나라의 과거 기상자료 분석결과를 보면 최근 10년(1999~2008년)과 과거 30년(1971~2000년)의 자료를 비교하였을 때 연 평균 강수량과 기온이 각각 9.1%, 0.6$^{\circ}C$ 상승하였고 2010년 전 지구 기온은 $14.52^{\circ}C$로 20세기 평균인 $13.90^{\circ}C$보다 $0.62^{\circ}C$ 높아 기온 관측이 시작된 1880년 이래 최고를 기록하였으며(2005년과 공동 1위), 2010년 북반구 기온편차는 $0.73^{\circ}C$로 역대 기온 관측 사상 가장 높았고 남반구 또한 $0.61^{\circ}C$로 상위 6위에 위치되었다. 또한 우리나라에서는 겨울철 이상 저온 현상을 경험하기도 하였다. 이에 본 연구에서는 우리나라 전역 기상청 60개 지점 1980년 1월 1일부터 2009년 12월 31 일까지의 자료를 바탕으로 기록 일 최저 기온 및 기록 일 최고 기온의 발생빈도를 분석하고자 하였다. 확률이론에 따르면 동일한 분포를 갖는 확률변수의 독립적인 시계열의 경우 최대값 또는 최소값의 발생빈도는 ��/n의 비율로 감소하게 된다. 여기서 /n은 관측이 시작된 시점부터 해당 시점까지 자료의 수이다. 본 연구의 경우에는 특정 지점의 특정 시점에 관측된 일 최대 기온이 동일한 분포를 갖는 독립적인 시계열을 이룬다고 한다면(즉, 증가 또는 감소 추세가 있지 않다면), 어떤 해에 관측된 일 최고 기온이 그 동안에 특정 시점에 관측된 일 최고 기온들보다 높을 확률은 1/n이 될 것이다. 그러나 만약 일 최대(또는 최저) 기온의 기록경신 발생빈도가 감소 비율로부터 유의하게 이탈하게 된다면, 이는 일 최고(또는 최저) 기온의 분산이 커지거나 작아지는 현상이 벌어진 경우이거나 일 최고(또는 최저) 기온의 평균이 어떤 추세를 갖게 되는 경우가 될 것이다. 그 결과 기록 일 최저 기온 발생빈도에 대한 기록 일 최고 기온 발생빈도의 비는 현재 약 2.5정도의 값이 나오는 것으로 분석되었으며 이러한 결과는 1980년 이후로 기록 일 최고 기온의 발생빈도는 /n의 비율로 감소하지만 기록 일 최저 기온의 발생빈도는 /n의 비율보다 낮게 발생하기 때문인 것으로 파악되었다. 이러한 과거 자료의 분석을 통하여 지금까지 진행되어 오고 있는 기후변화의 패턴을 보다 명확하게 인식하고자 하였으며, 추후 다양한 기후수치실험으로부터 도출된 결과들의 신뢰성을 평가할 때 기초적인 비교 자료를 제공할 수 있을 것이다.

  • PDF

A Study on the Stereo Image Matching using MRF model and segmented image (MRF 모델과 분할 영상을 이용한 영상정합에 관한 연구)

  • 변영기;한동엽;김용일
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2004.03a
    • /
    • pp.511-516
    • /
    • 2004
  • 수치표고모델, 정사영상과 같은 공간영상정보를 구축하기 위해서는 입체영상을 이동한 영상정합(image matching)의 과정이 필수적이며, 단영상 또는 스테레오 영상을 이용하여 대상물의 3차원 정보를 재구성하고 복원하는 기술은 사진측량 및 컴퓨터 비전 분야의 주요 연구 중의 하나이다. 본 연구에서는 화소값의 유사성과 상호관계성을 고려하는 MRF 모델을 이용하여 영상정합을 수행하였다. MRF 모델은 공간분석이나 물리적 현상의 전후관계(contextural dependencies)의 분석을 위한 확률이론의 한 분야로 다양한 공간정보를 통합할 수 있는 방법을 제공한다. 본 연구에서는 기준영상의 화소에 시차를 할당하는 접근 방법으로 확률모델의 일종인 마르코프 랜덤필드(MRF)모델에 기반한 영상정합기법을 제안하였고, 공간내 화소의 상호관계를 고려해주므로 대상물의 경계부분에서의 매칭 정확도를 향상시켰다. 영상정합문제에서의 MRF 기본가정은 영상 내 특정화소의 시차는 그 주위화소의 시차에 의한 부분정보에 따라 결정이 가능하다는 것이다. 깁스분포(gibbs distribution)를 사용하여 사후(posteriori) 확률값을 유도해내고, 이를 최대사후확률(MAP: Maximum a Posteriori)추정법을 이용하여 에너지함수를 생성하였다. 생성된 에너지함수의 최적화(Optimization)를 위하여 본 연구에서는 전역최적화기법인 multiway cut 기법을 사용하여 영상정합에 있어 에너지함수를 최소로 하는 이미지화소에 대한 시차레이블을 구하여 영상정합을 수행하였다.

  • PDF

Flood Risk Assessment of Seoul based on Watershed Characteristics (유역특성 기반의 서울시 침수위험성 분석)

  • Kim, Sung Eun;Kang, Won-Sam;Baek, Jong-Rak
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2022.05a
    • /
    • pp.38-38
    • /
    • 2022
  • 서울특별시(이하 서울시)는 기존 상습침수지역과 2010년, 2011년 집중호우로 발생한 침수피해를 바탕으로 34개의 침수취약지역을 선정하고, 이들 지역에 2011년 3월부터 2023년 12월까지 총사업비 1조 5,300억여 원을 투입하여 하수관거 정비, 펌프장 신설 및 증설, 저류조 신설 등 배수능력을 확충하는 사업을 진행해오고 있다. 하지만, 기후변화로 인해 집중형 배수시설의 설계용량을 초과하는 강우의 발생빈도가 증가하고, 극한홍수 발생위험과 기상예측 불확실성이 커짐에 따라, 배수시설의 용량을 증설하는 집중형 우수배제체계 중심의 침수관리만으로는 안전한 침수대응이 어렵게 되었다. 본 연구에서는 서울시 침수대응 다각화를 위해 유역의 자연적, 사회환경적 특성을 대표할 수 있는 52개 지표를 선정하고 서울시를 소규모 유역 단위인 163개의 배수분구로 구분하여 지표별 공간적 분포와 특성 분석을 통해 각 배수분구를 유형화하고, 유형특성에 따른 침수취약성과 잠재적 침수발생 위험성을 분석하여 침수위험성을 평가하였다. 유역의 특성을 대표하는 각종 지표의 서울시 내 공간적 분포를 분석한 결과, 지표별 공간적 분포 특성이 상이했으며, 지표별 최대/최소값의 차이가 수배에서 수백배까지 나타나는 것으로 분석되었다. 특히, 서울시 내외에 산포된 총 40개 기상청관측소의 2010년부터 2019년까지 시간강우자료를 이용하여 강우관련 지표들의 시공간적 분포를 분석한 결과, 연평균강우량, 여름철강우량, 일최대강우량 등에서 지역적으로 최대 수백 mm의 강우량 차이가 발생하는 것으로 나타났다. 유역특성에 따른 서울시 침수위험성을 평가한 결과, 침수발생 및 피해에 불리한 유역의 공간적 취약성이 높은 배수분구로는 봉천1, 송파, 길동, 미아, 상계1 등의 순으로 나타났으며, 침수발생에 대한 잠재적 위험성이 높은 배수분구는 이문, 정릉, 제기1, 장안, 전농 등의 순으로 분석되었다. 침수발생에 대한 잠재적 위험성과 침수피해에 불리한 공간적 취약성이 모두 높아 침수위험성이 큰 배수분구는 상계1, 미아, 장위, 창동1, 동선, 수유2, 방학, 길동, 월계2 등의 순으로 나타났다.

  • PDF

Development of Seat Allocation Model with Individual Demand's Diversion and Upgrade (개인수요의 상.하 이동을 고려한 좌석할당모형 개발)

  • Lee, Hwi-Young
    • The Journal of the Korea Contents Association
    • /
    • v.7 no.5
    • /
    • pp.156-165
    • /
    • 2007
  • The concepts of static seat allocation model has been used widely in the air transportation industry, and proven as a good concepts for managing perishable assets. The paper analyzed, in realistic environment, the volume of Accept Demand and Reject Demand through several times' simulation experiments at each fare level by using C-Program analyzing process applied to upward and downward models of demand, to analyze the change of fare level when upward and downward shifts of fare levels' demand happen at once. As a consequence, I concluded that the revenue of the case to consider the both shifts of demand at each fare level is bigger than that of the case to consider the single shift of demand at each fare level, except the case to downsize the seat allotment at very low price when supply is bigger than demand, with developing a general model concerned with plural fare levels.

Evaluation of Health Impact of Heat Waves using Bio-Climatic impact Assessment System (BioCAS) at Building scale over the Seoul City Area (생명기후분석시스템(BioCAS)을 이용한 폭염 건강위험의 검증 - 서울시 건물규모를 중심으로 -)

  • Kim, Kyu Rang;Lee, Ji-Sun;Yi, Chaeyeon;Kim, Baek-Jo;Janicke, Britta;Holtmann, Achim;Scherer, Dieter
    • Journal of Environmental Impact Assessment
    • /
    • v.25 no.6
    • /
    • pp.514-524
    • /
    • 2016
  • The Bio-Climatic impact Assessment System, BioCAS was utilized to produce analysis maps of daily maximum perceived temperature ($PT_{max}$) and excess mortality ($r_{EM}$) over the entire Seoul area on a heat wave event. The spatial resolution was 25 m and the Aug. 5, 2012 was the selected heat event date. The analyzed results were evaluated by comparing with observed health impact data - mortality and morbidity - during heat waves in 2004-2013 and 2006-2011,respectively. They were aggregated for 25 districts in Seoul. Spatial resolution of the comparison was equalized to district to match the lower data resolution of mortality and morbidity. Spatial maximum, minimum, average, and total of $PT_{max}$ and $r_{EM}$ were generated and correlated to the health impact data of mortality and morbidity. Correlation results show that the spatial averages of $PT_{max}$ and $r_{EM}$ were not able to explain the observed health impact. Instead, spatial minimum and maximum of $PT_{max}$ were correlated with mortality (r=0.53) and morbidity (r=0.42),respectively. Spatial maximum of $PT_{max}$, determined by building density, affected increasing morbidity at daytime by heat-related diseases such as sunstroke, whereas spatial minimum, determined by vegetation, affected decreasing mortality at nighttime by reducing heat stress. On the other hand, spatial maximum of $r_{EM}$ was correlated with morbidity (r=0.52) but not with mortality. It may have been affected by the limit of district-level irregularity such as difference in base-line heat vulnerability due to the age structure of the population. Areal distribution of the heat impact by local building and vegetation, such as spatial maximum and minimum, was more important than spatial mean. Such high resolution analyses are able to produce quantitative results in health impact and can also be used for economic analyses of localized urban development.