• Title/Summary/Keyword: 최고 효율점

Search Result 319, Processing Time 0.036 seconds

A Study on NTIS Services for Efficient National R&D Management (효율적 연구관리를 위한 NTIS 서비스 분석)

  • Choi, Heeseok;Jung, Ocknam;Han, Heejun;Kim, Yunjeong;Kim, Jaesoo
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2013.05a
    • /
    • pp.976-978
    • /
    • 2013
  • 최근 국가R&D 효율성 제고를 위하여 연구관리 강화를 위한 노력들이 매우 중요하게 인식되고 있다. 국가과학기술지식정보서비스(NTIS)는 R&D 효율성 강화를 위한 국가R&D정보 지식 포털로 자리매김하고 있다. 본 연구에서는 한국의 NTIS와 일본 문부과학성이 운영하는 부처공동연구개발관리시스템(e-Rad)을 연구관리 측면에서 비교 분석하고, 특히 연구자 편의성을 제고하는 관점에서의 연구관리 효율화를 위해 범부처적으로 공동활용이 가능한 서비스 요소들을 도출한다. 이를 바탕으로 향후 NTIS 개선방향에 대한 시사점을 분석한다.

Coordinates Determination of tow Level Control Point by Aerial Triangulation (사진기준점측량을 이용한 저등급 기준점의 좌표결정)

  • 최재화;이석배;최윤수
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.6 no.2
    • /
    • pp.34-41
    • /
    • 1988
  • Nowadays the considerable improvements, not only in photogrammetric equipment but also in adjustment methods have led to a high accuracy of Aerial Triangulation and reach the step to obtain A.T. technique that uses Global Position System without ground control survery. The enterance of analytical plotter have made considerable development both in accuracy and in efficiency and improved working environment of A.T. by the combination of On-Line Analytical Plotting System. In this paper, in A.T., with using of analytical polotter, aims to improve the acccuracy in coordinates determination of low level control point. The result shows that in case of A.T. with analytical plotter AVIOLYT BC2, the accuracy of control points improves to 7% in planimetry and to 40% in height compared to A.T. with precision plotter Autograph A-8.

  • PDF

Phosphorus Removal from Municipal Wastewater Using Ti-based Coagulants (티타늄계열응집제를 이용한 하수 내 인 제거)

  • Shin, So-Yeon;Kim, Jong-Ho;Ahn, Johng-Hwa
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.38 no.8
    • /
    • pp.428-434
    • /
    • 2016
  • This study evaluated the efficacy of Ti-based coagulants on phosphorus (P) removal from municipal wastewater and compared them with Al-based coagulants. Jar test experiments were performed at various chemical doses and OH/Ti molar ratio (B value). The higher the intial phosphate ($PO_4-P$) concentration, the lower the [Ti]/[P] to reach a residual concentration below 0.2 mg P/L. Removal efficiencies of total phosphorus increased with an increased coagulant dose but decreased after the efficiencies reached their maximum value regardless of coagulant or B value. On the other hand, $PO_4-P$ removal showed an increasing trend with an increased coagulant dose, reaching the plateau value under large coagulant dose conditions for both Ti- and Al-based coagulants regardless of B value. The chemical dose of Ti-based coagulants was approximately twice higher than that of Al-based coagulants with the same P-removal efficiency. The coagulation efficiency was influenced by different B values.

Cavitation Analysis on Ship Seawater Pump Using CFD (CFD를 이용한 선박용 해수펌프의 공동현상에 대한 분석)

  • Kim, Bu-Gi;Kim, Hong-Ryeol;Yang, Chang-Jo;Kim, Jun-Ho
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.4
    • /
    • pp.400-406
    • /
    • 2017
  • The model used in this study was reversed to analyze the cause of excessive damage that occurred inside the rotating system and pipe system of a centrifugal-type seawater pump on a ship. For this purpose, internal flow analysis on a cooling seawater pump was performed using CFD. As a result, the shape and boundary conditions of the target pump were set by reverse engineering, and pump efficiency at a design operating point of $125m^3/h$ was calculated as 85.3 % with a head of 32.0 m. The maximum efficiency point of the target pump was estimated to be 86.2 % at $150m^3/h$, but this differed from the actual operating point. At $112.5m^3/h$, which was the lowest flow point, flow was unstable due to the characteristics of the low flow point and analysis convergence was not good. The purpose of this study was to clarify the cause of ongoing cavitation in seawater pumps and piping systems in operation. Future research will be needed to clarify causes for pipe systems in the future by performing calculations for the total piping system of an inlet and outlet, in addition to measuring the flow rate of each branch pipe.

Estimation of Daily Maximum/Minimum Temperature Distribution over the Korean Peninsula by Using Spatial Statistical Technique (공간통계기법을 이용한 전국 일 최고/최저기온 공간변이의 추정)

  • 신만용;윤일진;서애숙
    • Korean Journal of Remote Sensing
    • /
    • v.15 no.1
    • /
    • pp.9-20
    • /
    • 1999
  • The use of climatic information is essential in the industial society. More specialized weather servies are required to perform better industrial acivities including agriculture. Especially, crop models require daily weather data of crop growing area or cropping zones, where routine weather observations are rare. Estimates of the spatial distribution of daily climates might complement the low density of standard weather observation stations. This study was conducted to estimate the spatial distribution of daily minimum and maximum temperatures in Korean Peninsula. A topoclimatological technique was first applied to produce reasonable estimates of monthly climatic normals based on 1km $\times$ 1km grid cell over study area. Harmonic analysis method was then adopted to convert the monthly climatic normals into daily climatic normals. The daily temperatures for each grid cell were derived from a spatial interpolation procedure based on inverse-distance weighting of the observed deviation from the climatic normals at the nearest 4 standard weather stations. Data collected from more than 300 automatic weather systems were then used to validate the final estimates on several dates in 1997. Final step to confirm accuracy of the estimated temperature fields was comparing the distribution pattern with the brightness temperature fields derived from NOAA/AVHRR. Results show that differences between the estimated and the observed temperatures at 20 randomly selected automatic weather systems(AWS) range from -3.$0^{\circ}C$ to + 2.5$^{\circ}C$ in daily maximum, and from -1.8$^{\circ}C$ to + 2.2$^{\circ}C$ in daily minimum temperature. The estimation errors, RMSE, calculated from the data collected at about 300 AWS range from $1.5^{\circ}C$ to 2.5$^{\circ}C$ for daily maximum/minimum temperatures.

Evaluation of Project Manager's Leadership in Construction Projects (건설사업 현장소장의 리더십 평가에 관한 연구)

  • Gang, Ji-Sun;Kim, Han-Soo
    • Korean Journal of Construction Engineering and Management
    • /
    • v.11 no.1
    • /
    • pp.151-159
    • /
    • 2010
  • Leadership is a critical factor for success or failure of an organization. Project managers in construction projects are 'field CEO' so their leadership affects performance of the projects. The objectives of this study is to evaluate the leadership of project managers and to analyse its major characteristics. The LBDQ(Leader Behavior Description Questionnaire) technique was used to evaluate and identify types of leadership of project managers from 'heaven' and 'hell'. Relationships between leadership and performance of the projects were also discussed.

커패시터를 사용한 초저가의 교류전원 LED 최적 구동회로 개발

  • Lee, Byeong-Hun;Kim, Hyeon-Jae;Kim, Bong-Cheol;Im, Chun-Taek
    • Proceedings of the KIPE Conference
    • /
    • 2010.07a
    • /
    • pp.426-427
    • /
    • 2010
  • 커패시터 소자와 브릿지 다이오드만을 사용한 교류전원 LED 구동회로를 분석하여, 초저손실 고효율 특성과 더불어 입력전류의 고조파 및 역률특성이 양호해지는 동작점을 찾아내었다. 커패시터 소자는 교류전원에 직렬로 연결되어 전력손실 없이 LED 전류를 제한하는 역할을 하게 되며, 브릿지 다이오드 정류회로는 LED 어레이를 교류전원의 2배 주파수로 구동시키게 한다. 분석결과, 제안된 LED 구동회로는 LED 어레이의 전압강하가 입력 교류전압 최대치의 절반이 될 때 역률특성과 효율이 최고가 되며, 동작온도 변화에 따른 LED 어레이 전압 변동에 대해 출력이 변하지 않는 특징을 갖는다. 이러한 LED 구동회로는 스윗칭 레귤레이터나 IC 등이 없이 단순 수동소자만을 사용함으로써 제품원가 최소화와 효율향상을 동시에 달성할 수 있으며, 실험을 통해 특성이 확인되었다.

  • PDF

A Study on Key Distribution Using Level-key in Wireless Sensor Networks (무선 센서 네트워크에서 레벨 키를 이용한 효율적인 키 분배 방법에 관한 연구)

  • Kim, Do-Hoi;Choi, Jin-Young;Chung, Tai-Myoung
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.11a
    • /
    • pp.815-818
    • /
    • 2007
  • 최근 유비쿼터스 시대가 도래하면서 센서 네트워크의 중요성이 대두되고 있다. 센서 네트워크란 필요한 모든 곳에 전자태그를 부착하고, 이를 통해 사물의 인식 정보를 기본으로 주변의 환경정보까지 각종 센서를 통해 실시간으로 수집하여 관리, 통제할 수 있도록 구성한 네트워크를 말한다. 이러한 센서 네트워크에서 각 노드들은 에너지, 계산 능력, 대역폭 등에 상당한 제한을 받으며, 정보가 저장된 장치를 쉽게 도난 당할 수도 있다. 특히 보안 통신을 하기 위해 키 설정 및 관리는 필수적이며 지금까지 그로 인해 여러 가지 키 분배 및 관리 방법이 제안되었다. 본 논문은 군대 등의 특정 상황과 같이 계층적 구조를 가지는 센서 네트워크에서 더욱 효율적으로 통신을 할 수 있는 키 관리 방법을 소개하고자 한다. 기존의 계층적 구조의 취약점을 분석하고, 이를 바탕으로 레벨 키를 제안하여 같은 레벨에서 다른 그룹간 통신이 가능한 효율적인 키 분배 방안을 제시한다.

  • PDF

A study on the efficient application of OJT system : focused on the vehicle maintenance company (自動車整備士에 대한 OJT制度의 效果的 運營)

  • 김봉수
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.10 no.2
    • /
    • pp.23-38
    • /
    • 1988
  • 자동차정비기술 및 기능숙련을 보다 빨리 함양시키기 위한 방법중 필요한 작업시간을 최대로 유지시키고 평소 작업시간에 지장이 없는 상태에서 어떻게 하면 효율적인 교육훈련을 실시할 수 있느냐가 바로 문제의 핵심이라 하겠다. 그러므로 본 연구는 이러한 점에 착안하여 자동차정비사업체에 종사하고 있는 정비기능사에 대한 직장내교육훈련(OJT)제도운영실태를 분석하여 애로사항과 문제점에 대한 대책을 수립하여 자동차정비사의 기술능력향상을 위한 OJT제도 운영개선방향을 제시함을 목적으로 하였다.

  • PDF

VJ System as The New Video Production Paradigm (새로운 영상제작 패러다임: VJ System)

  • 최이정
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2001.06a
    • /
    • pp.330-337
    • /
    • 2001
  • 디지털 영상제작 환경의 변화가 제일 먼저 뿌리를 내린 곳은 바로 1인 제작방식(One Man Producing System)을 취하고 있는 VJ(Video Journalist) 분야다. 6mm 소형 디지털 카메라와 디지털 편집기술의 등장 이후 VJ를 중심으로 급속도로 확산되고 있는 1인 제작시스템은 영상물 제작의 새로운 패러다임을 형성하고 있으며, 특히 VJ시스템의 고효율성은 기존의 방송영상물 시장에 기여할 수 있는 높은 잠재력과 가능성을 내포하고 있다. 그러나 현재 VJ시스템은 단지 값싼 영상제작 시스템정도로 왜곡되어 관습화 되어가고 있는 실정이다. 이런 맥락에서 본 논문은 VJ시스템의 특성을 중심으로 그 경쟁력 강화를 위한 지향점을 논한다.

  • PDF