• Journal of Korean Society of Steel Construction
• /
• v.28 no.6
• /
• pp.449-458
• /
• 2016

The temperature data were measured for two years in a bridge specimen and the bridge in service nearby in order to calculate the effective temperature for thermal loads in steel box girder bridge. The maximum and minimum effective temperatures were calculated in the bridge specimen and the bridge according to air temperature in 2014, 2015 and 2years. The effective temperatures calculated in this study were compared the Euro code and the Highway Bridge Design Criteria. The coefficients of determination in the maximum effective temperature and the Euro code for 2 year were calculated from R = 0.927, R = 0.894 in a bridge specimen and the bridge respectively. Those of minimum temperature and the Euro code were analyzed from R = 0.992, R = 0.813 in two bridge respectively. Also, the results were evaluated as being very similar, or slightly increased as compared with the maximum temperature of the Korean Highway Bridge Design Code(Limit State Design).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.740-745
• /
• 2020

To calculate the reasonable design temperature load of a concrete box girder bridge, one bridge test specimen was made. The temperature gauges installed on the bridge test specimen measured 48 sets of temperature per day at 30-minute intervals during the summer and winter periods of one year. The temperature measured at each station was treated statistically to calculate the trend line and standard error, and the temperature distribution and trend line at the representative station were presented. The maximum effective temperature and the lowest effective temperature were calculated from the air temperature suggested by Euro code. The maximum effective temperature was calculated to be 1.5 to 2℃ higher than the Euro code at 35℃ and above. In comparison, the lowest effective temperature was 0.5 to 1.1℃ lower at -13℃ to-19℃. Compared to the effective temperature of this study according to the highest and lowest 50-year frequency of the Yangsan region, the highest effective temperature was 4.7℃ higher, and the lowest effective temperature was 4.5℃ lower. Considering the increasing climate change and reflecting the results of this analysis, it is deemed necessary to make the current temperature design standards larger.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.133-139
• /
• 2016

In order to obtain a reasonable value for the thermal load to use in designs, a bridge specimen of a full-size steel box girder (bridge) was manufactured. The temperature data were measured at 21 points in the bridge specimen and 19 points in the steel box bridge. The steel box bridge specimen was installed in a similar direction to a nearby real one. The maximum effective temperatures in the bridge specimen and bridge were calculated for air temperatures in the range of $24^{\circ}C{\sim}38^{\circ}C$. The maximum effective temperature of the bridge specimen and bridge showed correlations of approximately 93.2% and 87.4%, respectively, compared with the Euro code. The maximum effective temperature calculated in this study was very close to the Euro code and the maximum temperature of the Highway Bridge Design Criteria. When the effective temperature obtained in the study is combined with the highest temperature calculated from the Contour map for each region, the design criteria for the thermal load in domestic bridge design, taking into consideration the characteristics of each region, can be established.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.96-103
• /
• 2018

An analysis using a statistical method is generally used to determine the effective temperature based on the temperature design load of a bridge. In this study, the effective temperature was calculated by building an artificial neural network (ANN) capable of improving the statistical method. A Steel box girder bridge specimen was made with a width of 2.0 m, height of 2.0 m, and length of 3.0 m and 0.2 m the upper slab. Twenty one temperature gauges were attached to measure the temperature between 2014 and 2016 for three years. An ANN was learned using the data measured from 2014~2015 and the results were compared with the Euro codes. The error rate between the Euro code and statistical analysis values was analyzed to be 4.1 % for the total measurement point. The ANN was verified and the effective bridge temperatures were calculated using the temperature data measured in 2016. The results revealed an approximate 3.97 % difference from the statistical analysis values. This degree of error is considered to be acceptable in terms of engineering for the analysis of an ANN. An ANN can easily predict the effective temperature of a bridge by knowing the input values of the region's highest temperature, bridge type, and upper asphalt thickness when designing the bridge's temperature loads.

• Korean Journal Plant Pathology
• /
• v.12 no.2
• /
• pp.209-213
• /
• 1996

배나무잎 이상반점증상의 발병환경 조건을 조사하고자 실험한 결과 주간 23$^{\circ}C$, 야간 18$^{\circ}C$ 온도조건에서 병징발현이 가장 심하였고 이보다 높은 온도인 28/23$^{\circ}C$와 낮은 온도인 18/13$^{\circ}C$에서는 발병이 아주 적었다. 배나무잎에 봉지를 피복하면 발병이 전혀 없거나 극히 저조하였다. 이것은 봉지내의 온도가 최고 46.8$^{\circ}C$까지 올라가 고온에 의하여 발병이 억제된 것으로 생각된다. 이병주 토양과 건전주 토양의 화학성을 조사한 결과 이병주 토양에서는 건전주 토양보다 유효인산량이 많게 나타났다. 토양수분이 많거나 적었을 때는 병징발현이 다소 늦어지기는 하나 최종 조사시 발병정도는 큰 차이를 나타내지 않았다.

• Journal of Bio-Environment Control
• /
• v.23 no.1
• /
• pp.39-42
• /
• 2014

The objective of this study was to estimate cardinal temperatures for germination of lettuce (Lactuca sativar L.) using bilinear, parabolic, and beta distribution functions. Seeds of lettuce were germinated in a growth chamber at 7 constant temperatures: 10, 14, 16, 20, 24, 28, and $32^{\circ}C$. Four replicates of 100 seeds were placed on two layers of filter paper in a 9 cm petri-dish. Radicle emergence of 1 mm was scored as germination. The time course of germination was modeled using a logistic function. These minimum, optimum, and maximum temperatures were estimated by regression of the inverse of time to 50% germination rate against the temperature gradient. In bilinear function, minimum, optimum, and maximum temperatures were $7.9^{\circ}C$, $23.3^{\circ}C$, and $28.0^{\circ}C$, respectively. In parabolic function, minimum, optimum, and maximum temperatures were $9.7^{\circ}C$, $19.5^{\circ}C$, and $29.4^{\circ}C$, respectively. In beta distribution function, minimum, optimum, and maximum temperatures were $3.7^{\circ}C$, $20.7^{\circ}C$ and $32.0^{\circ}C$, respectively. Minimum, optimum, and maximum ranges of temperatures were $3.7{\sim}9.7^{\circ}C$, $19.5{\sim}23.3^{\circ}C$, and $28.0{\sim}32.0^{\circ}C$, respectively.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.1
• /
• pp.41-46
• /
• 2021

Sorghum×sudangrass hybrid (Sorghum bicolor (L.) Moench, SSH) is one of the most important summer forage crop and it is widely used for silage in Korea. Agriculture is highly dependent on the climate condition and experiencing significant loss of productivity due to climate change. This study was conducted to investigate the correlation analysis between productivity of forage SSH and climatic factors in Central Northern region of South Korea for 3 years (2017 to 2019). Plant height and dry matter yield of SSH were significantly higher in Gyeonggi-do than Ganwon-do. The productivity of SSH is more closely related with temperature than other climatic factors. Maximum temperature and Growing degree days in May and June showed a positive correlation. However, correlation between production of SSH and precipitation was not clear in this study, but rainy days showed a negative correlation (0.42). In conclusion, temperature is most important climatic factor to the maintenance of plant yield.

• Korean journal of applied entomology
• /
• v.61 no.4
• /
• pp.563-575
• /
• 2022

Maruca vitrata is one of important pests in leguminous crops, especially red bean. We investigated the effects of temperature on development of each life stage, adult longevity and fecundity of M. vitrata for understanding the biological characteristics of the insect species at eight constant temperatures of 13, 16, 19, 22, 25, 28, 31, and 34℃. Eggs hatched successfully at all temperature subjected and larvae successfully developed to the adult stage from 16℃ to 31℃. The developmental period of egg decreased up to 31℃ and after then increased. The developmental period of larva and pupa, and adult longevity of M. vitrata decreased with increasing temperature. Lower and higher threshold temperature (TL and TH) were calculated by the Lobry-Rosso-Flandrois (LRF) and Sharpe-Schoolfield-Ikemoto (SSI) models. The lower developmental threshold (LDT) and thermal constant (K) from egg hatching to adult emergence of M. vitrata were estimated by linear regression as 12.8℃ and 280.8DD, respectively. TL and TH from egg hatching to adult emergence using SSI model were 14.2℃ and 31.9℃. Thermal windows, i.e., the range in temperature between the minimum and maximum rate of development, of M. vitrata was 17.7℃. In addition, we constructed the oviposition models of adult, using the investigated adult traits including survival, longevity, oviposition period and fecundity. Temperature-dependent development models and adult oviposition models will be helpful to understand the population dynamics of M vitrata and to establish the strategy of integrated pest management in legume crops.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.461-473
• /
• 2022

Matsumuraeses phaseoli is one of important pests in soybean crops, especially adzuki beans. We investigated the effects of temperature on development of each life stage, adult longevity and fecundity of M. phaseoli for understanding the biological characteristics of M. phaseoli at ten constant temperatures of 7, 10, 13, 16, 19, 22, 25, 28, 31, and 34℃. Eggs hatched successfully at all temperature subjected except 7℃ and 34℃. The developmental period of each life stage and adult longevity of M. phaseoli decreased as temperature increased. Lower and higher threshold temperature (TL and TH) were calculated by the Lobry-Rosso-Flandrois (LRF) and Sharpe-Schoolfield-Ikemoto (SSI) models. The lower developmental threshold (LDT) and thermal constant (K) from egg hatching to adult emergence of M. phaseoli were estimated by linear regression as 9.04℃ and 422.97DD, respectively. TL and TH from egg hatching to adult emergence using SSI model were 20.0℃ and 32.3℃. Thermal windows, i.e., the range in temperature between the minimum and maximum rate of development, of M. phaseoli was 12.3℃. We constructed the adult oviposition model of M. phaseoli using adult survivorship and fecundity. Temperature-dependent development models and adult oviposition models will be helpful to understand the population dynamics of M. falcana and to establish the strategy of integrated pest management in soybean fields.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.10a
• /
• pp.13-13
• /
• 1998

램가속기의 발진 과정에서 유동장 내에는 수백 기압 이상의 고압 영역이 존재하며 이러한 영역에서는 이상기체 가정이 더 이상 유효하지 않게 된다. 따라서 램가속기 작동조건에 적용 가능한 적절한 형태의 실제 기체 상태 방정식이 요구된다 또한 기존의 온도에 종속적인 Arrhenius 형태의 기초 반응들로 이루어진 축소 화학 반응 모델은 상압 조건하에서 적용 가능하므로 고압 화경에서 적용하기 위해서는 온도뿐 아니라 압력에 종속적인 형태의 반응율 상수가 도입되어야 한다.