• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.46-53
• /
• 2007

We depolymerized PET in supercritical methanol and observed the yield of DMT at various reaction conditions. At subcritical state below $240^{\circ}C$, the yield of DMT was very low, about only 50%. It increased dramatically to 80% at supercritical state above $260^{\circ}C$, thereafter the increasing rate was reduced significantly. Similarly, at subcritical state of 6.89 MPa, the DMT yield was only 50%, but it increased abruptly to 85% at supercritical state of 10.34 MPa, yielding no further increase above the pressure. Within 10 minutes after the beginning of the reaction, the DMT yield reached 80%, indicating that the significant portion of the reaction has proceeded, and then, the yield increased slowly. The methanol/PET ratio of 8 showed the maximum DMT yield. We found the optimum depolymerization condition fur PET methanolysis is temperature $300^{\circ}C$, pressure 10.34 MPa, reaction time 40 minutes, and methanol/PET ratio of 8.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.109-113
• /
• 2004

GMR isolator was modeled using a Wheatstone bridge which is profitable for transmitting rectangular wave digital data, and the output voltage characteristics in relation to the input current were investigated in time domain. GMR isolator modeling was divided into two parts, namely magnetic and electric parts. The flow chart of the modeling was drawn in which measured MR curve of the spin valves were incorporated to obtain the electrical voltage output. For magnetic modeling, 3-dimensional model of planar coil was analyzed by FEM method to obtain the magnetic field strength corresponding to the input current. For electric modeling, resistance, inductance and capacitance of the planar coil were calculated and magnetic field waveform was obtained corresponding to the coil current waveform in time domain. Finally, MR-H curves of spin valves and the magnetic field waveform at the spin valves were composited to obtain the output voltage waveform of the isolator. Even though the amplitude of the coil current waveform was increased by 100％, decreased by 90％, or delayed by 10％ of the period compared with the input current, similar transmitted output voltage waveform to the input current waveform was obtained due to hysteretic characteristics of the spin valves at the transmission speed of over 400 Mbit/s.

• Journal of KIISE:Computer Systems and Theory
• /
• v.28 no.12
• /
• pp.674-684
• /
• 2001

This paper presents the SIC(Size-Interval-Count) prefetching scheme that can record the file access patterns of applications within a relatively small space of memory based on the repetitiveness of the file access patterns. Several knowledge-based prefetching methods were recently introduced, which includes high correctness in predicting future accesses of applications. They records the access patterns of applications and uses recorded access pattern information to predict which blocks will be requested next. Yet, these methods require to much memory space. Accordingly, the proposed method then uses the recorded file access patterns, referred to as "SIC access pattern information", to correctly predict the future accesses of the applications. The proposed prefetching method improved the response time by about 40% compared to the general file system and showed remarkable memory efficiency compared to the previously knowledge-based prefetching methods.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.835-841
• /
• 2002

To reduce the salt content of Korean traditional kochujang, horseradish and mustard powder (1.2%) were added to kochujang ingredients with $4{\sim}6%$ of sodium chloride, and their physicochemical characteristics were monitored with those of the control (10% salt added) during fermentation at $25^{\circ}C$ for 120 days. The pH of kochujang gradually decreased and acidities increased at low-salt concentration. The salt lowered the acid production in proportion to the salt concentration. The amino-type nitrogen in kochujang increased during fermentation at higher proportion with lower salt concentration. Free amino acids showed the same trend as amino-type nitrogen, and their major amino acids were in order of aspartic acid, glutamic acid, and serine. Kochujang containing horseradish or mustard showed superior qualuty than the control, and 6% of salt was the acceptable level for low-salt kochujang preparation.

• Korean Journal of Food Science and Technology
• /
• v.22 no.1
• /
• pp.38-43
• /
• 1990

Effects of concentration (5-8%, db) and heating temperature $(80^{\circ}C-95^{\circ}C)$ on rheological of mungbean starch were examined. The pasting curve by amylograph revealed no peak viscosity and the viscosity continued to increase during cooking, regardless the starch concentrations. Mungbean starch paste showed a pseudoplastic flow behavior with yield stress. The consistency index of paste increased as the heating temperature was raised at a given concentration. However, flow behavior index showed opposite trend. The percent sag of starch gel stored at $4^{\circ}C$ decreased with the increase of concentration and heating temperature. The firmness of fresh gel prepared from 7 and 8% starch suspensions by heating at $95^{\circ}C$ for 15 min with amylograph was about 2-times higher than that of 6% gel. However, the time constant, reciprocal of rate constant, of starch gels during aging at $4^{\circ}C$ was not significantly influenced by concentrations and heating temperatures.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.214.2-215
• /
• 2003

압출조리 공법에 의한 한국형 쌀 이유식 제조에서 아밀라제 첨가가 압출미분의 물성 변화에 미치는 영향을 알아보았다. 압출조리기의 스크류 회전수는 200rpm, 원료의 사입속도는 180g/min로 고정하여 작동하였다. 원료 쌀가루의 수분함량은 18, 23, 28%로 가수하였고 첨가된 아밀라제는 Bacillus licheniformis로부터 분리한 Termamyl 120LS(NOVO사), Bacillus amylolichuefaciens로부터 분리한 BAN 240L(NOVO사) 및 맥아분말이다. 아밀라제 첨가에 의해 압출미분의 수용성지수는 3배까지 증가했고, 환원당 생성량은 원료의 수분함량에 크게 영향을 받아 28% 수분함량에서 급격히 증가하여 수용성지수와는 다른 경향을 나타내었다. 겔 투과크로마토그래피에 의한 분자량적 구조 변화 측정 결과 아밀라제 첨가에 의해 고분자 획분이 상당히 감소했으며 상대적으로 저분자 획분이 증감함을 알 수 있었다. 아밀라제의 잔존환성은 아밀라제 종류에 따라 다르며 가장 내열성인 Termamyl 120LS의 경우 용융부위 온도 14$0^{\circ}C$에서 27%까지 감소하였다. 침전법에 의한 분산특성은 아밀라제 작용에 의해 수용성 물질이 증가함에 따라 침전층의 감소를 나타내었으나 처리온도가 14$0^{\circ}C$로 증가하면 침전층의 높이는 증가하였다. 겉보기 점도는 아밀라제 첨가에 의해 무처리 압출미분의 1/4~1/200로 감소하였다. 시판 이유식의 권장농도에서의 점도와 같은 점도 수준에 도달하기 위해서는 원료의 수분함량(18, 23, 28%), 아밀라제 종류 및 첨가량, 계량부위 온도에 따른 각 작동조건의 압출미분을 최고 1.8배의 양을 사용할 수 있었다. 이상에서 살펴본 바와 같이 원료 쌀가루에 첨가된 아밀라제가 압출조리기내를 통과하면서 쌀가루의 가수분해를 일으켜 환원당 등 수용성 물질이 증가하고 분산특성이 좋아지며 점도가 낮아지고 결국 이유식의 열량밀도를 증가시킬 수 있음을 확인할 수 있었다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.6
• /
• pp.635-642
• /
• 2003

Reinforcement learning got successful results in a lot of applications such as control and scheduling. Various function approximation methods have been studied in order to improve the learning speed and to solve the shortage of storage in the standard reinforcement learning algorithm of Q-Learning. Most function approximation methods remove some special quality of reinforcement learning and need prior knowledge and preprocessing. Fuzzy Q-Learning needs preprocessing to define fuzzy variables and Local Weighted Regression uses training examples. In this paper, we propose a function approximation method, Fuzzy Q-Map that is based on on-line fuzzy clustering. Fuzzy Q-Map classifies a query state and predicts a suitable action according to the membership degree. We applied the Fuzzy Q-Map, CMAC and LWR to the mountain car problem. Fuzzy Q-Map reached the optimal prediction rate faster than CMAC and the lower prediction rate was seen than LWR that uses training example.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.827-830
• /
• 2013

Due to strong wind of smartphone, change in human life is facing 21 Century's new revolution. The end of 2012, The record rate of supply of smartphone is up to 58.8 percent. So the reputation of IT power are continuing. Korea is boasting IT infrastructure, and the reputation of IT power with rapidly evolving. But Korea is one of OECD country with the longest working hours and in labor productivity, yet is located in the lower rank. Now, common social issues such as low-carbon, green growth, low birthrate, graying, labor productivity growth, the reduce greenhouse gas is constantly increasing in worldwide. So Smart Work is getting attention as a way to resolve this. In this paper, we study the impact of small business on local economy and the status information of small business on statistical point of view. And we offer the smart work countermeasures of small business through detailed action elements and the model proposed fot driving factor for the promotion of smart work. Through this, we propose the IT system model for The SMEs-type smart work system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1757-1763
• /
• 2014

Optical wavelength division multiplexing signals of eight non-return-to-zero 10 Gb/s channels were transmitted on the long-haul link up to 720 km. The link span was composed of 80 km single mode fiber, dispersion compensation fiber for complete compensation, and EDFAs. A circulating loop method was applied to the link experiment and the loop was optimized for the transmission link. Wavelength-dependent gain variation of EDFA was compensated using EDFAs of opposite gain slopes without expensive gain flattening filters. Average OSNR was aggravated to 22 dB and the worst OSNR channel variation was 9.7 dB after the transmission. It was confirmed by analyzing optical spectra that this OSNR variation was mainly caused by the hole burning effect of EDFA.

• The KIPS Transactions:PartA
• /
• v.10A no.2
• /
• pp.137-140
• /
• 2003

Recently, CG (Conjugate Gradient) scheme for the optimization of the Rayleigh quotient has been proven a very attractive and promising technique for interior eigenvalues for the following eigenvalue problem, Ax＝λx (1) The given matrix A is assummed to be large and sparse, and symmetric. Also, the method is very amenable to parallel computations. A proper choice of the preconditioner significantly improves the convergence of the CG scheme. We compare the parallel preconditioners for the computation of the interior eigenvalues of a symmetric matrix by CG-type method. The considered preconditioners are Point-SSOR, ILU (0) in the multi-coloring order, and Multi-Color Block SSOR (Symmetric Succesive OverRelaxation). We conducted our experiments on the CRAY­T3E with 128 nodes. The MPI (Message Passing Interface) library was adopted for the interprocessor communications. The test matrices are up to $512{\times}512$ in dimensions and were created from the discretizations of the elliptic PDE. All things considered the MC-BSSOR seems to be most robust preconditioner.