• Journal of Astronomy and Space Sciences
• /
• v.11 no.2
• /
• pp.320-326
• /
• 1994

The KITSAT-1 (Auguse, 1992) and the KITSAT-2(September, 1993) were successfully launched and operated by the SatRec(Satellite Research Center). Both carry the CCD cameras to monitor the image of the earth. We used the camera bench type automatic equipment in the KSRI(Korea Standards Research Institute) to measure the MTF(Modulation Transfer Function) value of the lens attached to the CCD camera. We measured the tangential MTF and the sagital MTF by varing the f-number and the field angle. According to the result, the light from a point source is focused within one pixel of the CCD chip when the f-number is smaller than 4.0, and the MTF value becomes smaller as the field angle increases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.45-54
• /
• 2006

General unmaned airship, in use of aviation photography, needs both airship -controller and camera-controller who work together in harmony. In oder to reduce this manpower and get the good Geographical Information Systems(GIS) data, it is necessary to use a autopilot controller which guides a exact path lines. This paper presents the autopilot control law base on classical PID control. Moreover, this paper shows the result of flight test, the procedure of gain tuning and LOS guidance algorism that is reduce a tracking error.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.919-923
• /
• 2007

This paper presents an urine analyzer using color images of strip. An image sensor has been used to acquire an color images. The analyzer has a characteristics which takes a pictures of independent each pad responding to urine items all at once, and outputs the measured urine values by analysing an acquired pad colors. This device measures and analyses 11 urine items, and has a speed-up operation, light weight, small size, and makes accurate observations by processing the measured colors using processor. The urine analyzer transmits the urine items to peripheral devices, personal computers, hospitals, and another places by using a telegraph and a wireless interfaces.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.476-476
• /
• 2010

유도 결합 플라즈마 (ICP)는 축전 결합 플라즈마 (CCP) 보다 상대적으로 높은 밀도의 플라즈마를 발생시킬 수 있다. 또한 구조가 간단하고 기존 스퍼터링 장치의 내부에 추가 설치가 용이하며, 스퍼터된 입자의 이온화, 반응성 가스의 활성화를 위한 2차 플라즈마원으로 적용이 가능하다. 그러나 대면적의 고밀도 플라즈마의 균일도 측정은 고가의 2D probe array등을 사용하여야 한다. 본 연구에서는 간단한 CCD camera를 챔버 내부에 삽입하여 가시광 영역의 적분 강도를 이용해서 플라즈마의 2차원적 균일도를 정성적으로 비교 판단하고 시간에 따른 국부적인 이상 방전을 감시할 수 있도록 내장형 무선 카메라를 사용하였다. 직경 380 mm의 챔버 내에 2 turn ICP antenna를 이용하여 유도 결합 플라즈마를 발생시켰다(Ar 30 sccm, 35 mTorr, 2 MHz, 400 W). 내장형 무선 카메라를 챔버 내부 중앙의 ICP antenna에서 8 cm 아래에 위치시켜 플라즈마를 진공 중에서 촬영하였다. 내장형 무선 카메라를 챔버 내부에 위치하여 촬영한 결과 외부에서 view port로 쉽게 확인할 수 없는 ICP antenna 내부의 고밀도 플라즈마의 불균일도를 평가할 수 있었고, ICP antenna 가장자리에서 중심으로 이동할수록 밝아지는 것을 토대로 중심 영역의 plasma 밀도가 가장 높다는 것을 알 수 있었고, 채도와 명도의 차이를 이용하여 시각적인 플라즈마 균일도를 분석하였으며 이를 플라즈마 모델링 기능이 있는 전산 유체 역학 프로그램인 CFD ACE+를 이용하여 플라즈마 분포를 모델링 및 비교하였다. 또한 인라인 타입의 마그네트론 스퍼터링 시스템에서 기판 캐리어에 무선 카메라를 장착하여 이동하면서 캐리어와 마그네트론 방전 공간의 상대적인 위치에 따른 마그네트론 방전링의 형상 변화도 관찰하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.182-182
• /
• 2016

표면영상유속계는 영상분석을 이용하여 홍수시 하천 수표면 유속을 측정하는 비접촉식 유속측정장치이다. 때문에 안전하고 편하게 홍수시 유속을 측정할 수 있으나, 실제 적용상 몇 가지 문제가 있다. 하나는 야간과 악천후에는 영상 촬영이 어렵다는 점이고, 다른 하나는 영상과 실세계와의 좌표변환을 위한 참조점 측량이 반드시 필요하다는 점이다. 본 연구에서는 열영상 카메라를 이용하여 첫 번째 문제를 해결하고, 방향센서(경사계)를 이용하여 두 번째 문제를 해결하여, 언제든지 유속측정이 가능한 실시간 표면영상유속계를 개발하였다. 열영상카메라는 별도의 조명장치없이도 주야간 영상 촬영이 가능하다. 또한 안개의 영향을 받지 않으며, 저유속시 생기는 수면파의 움직임도 잡아낼 수 있는 장점이 있다. 또한, 방향센서를 이용하여 참조점을 이용하지 않고, 좌표변환 관계를 구성할 수 있도록 카메라 모형(camera model)을 구성하였다. 이 카메라 모형에 필요한 외부 변수는 하천수표면과 카메라와의 높이 및 카메라의 두 가지 경사각뿐이다. 여기에 일반적인 카메라 보정에 이용하는 방법으로 구한 카메라 내부 변수를 결합하면 된다. 이렇게 개발한 열영상 표면영상유속계는 실험 수로와 하천 현장에 적용한 결과, 종전보다 훨씬 적용이 간편하며, 매우 높은 정확도로 유속을 측정할 수 있었다.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.123-129
• /
• 2023

The purpose of this study was to analyze differences in imaging quality and dose difference between intra-venous (IV) and intra-arterial (IA) liver dynamic computed tomography (CT). Herein, retrospective, blinded analysis was conducted to analyze signal-to-noise and contrast-to-noise ratios in cases of patients who underwent IV or IA liver dynamic CT for transarterial chemoembolization (TACE), an interventional procedure for hepatocellular carcinoma. The dose length product (DLP) value stored in Picture Archive and Communication System (PACS) was used to calculate the effective dose and thereby compare differences in the dose between the two methods. The mean liver and spleen signal to noise ratio (SNR) was greater in IV-liver dynamic CT than in IA-liver dynamic CT; however, contrast to noise ratio (CNR) was higher in IA-liver dynamic CT than in IV-liver dynamic CT. However, there were no differences in DLP and effective dose between the two methods. In conclusion, our findings showed that IA-liver dynamic CT showed a similar effective dose and superior CNR compared with IV-liver dynamic CT. Further studies must analyze 3D angiography CT of the hepatic artery to clearly distinguish the feeding artery, which is the essential step in interventional procedures for hepatocellular carcinoma.

• Journal of the Korean Society of Radiology
• /
• v.9 no.4
• /
• pp.219-225
• /
• 2015

This study aims to evaluates the image quality of CR and DR that are scanned with the use of the attachable carbon heater X-ray scanner table equipped with heating device by measuring SNR and CNR before and after the attachment of the said table. In the aluminum staircase testing, CR increased SNR and CNR when attached with the table, while DR decreased SNR and CNR. In the human-body model phantom testing, CR increased SNR and CNR only in the low-energy low-dose radiation and the high-energy high-dose radiation, but decreased SNR and CNR under all other conditions. In conclusion, the use of such table can make the patient feel comfortable by removing his or her anxiety, thus helping the testing, but in the actual clinical application thereof, if the thickness and material of the bottom film and the protective film, including the carbon heater, are not considered, it affects the picture quality, thereby requiring continuous research on the use of such table.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.359-367
• /
• 2016

As taking pictures by using smartphones has become more common in society, there are many incidents which are unexpected manipulation of images and leak of confidential information. Because of those incidents, demands that identify forgery/alteration of image file and proves of the original copy is constantly increasing. In general, smartphone saves image file as JPEG form and it has DQT which determines a compression rate of image in a header part of image. There is also DQT in Thumbnail image which inside of JPEG. In previous research, it identified a smartphone which take image by only using DQT, However, the research has low accuracy to identify the devices. There are two main purposes in this research. First, this research will analogize a smartphone and an application that takes a picture, edits and save an image file by testing not only about a DQT information but also a information of Thumbnail image. Second, the research will build a database of DQT and Thumbnail information in JPEG file to find more accurate image file's origin.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.11
• /
• pp.427-438
• /
• 2016

Car blackboxes record the information and status of driving. Since blackboxes are commonly used in daily life, the usage of video data recorded from blackboxes is increasing for investigating. Investigators use a own analysis tool suitable for their blackbox provided by the manufacturer in order to check the data. But the tools are not enough to use in the digital forensic analysis because they are dependent on a specific model of blackbox and provides ungeneralized functions. Moreover, if the manufacturer is bankrupt, then their own tools can not be obtained also. Therefore, the way data are stored in the blackboxes which are now in the market are investigated and the features and limitations which have blackbox's own analysis tools are checked. And a comprehensive tool for the analysis of blackboxes is designed and implemented as in this paper.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.429-433
• /
• 2014

In this study, the morphology and the x-ray quantum efficient of mercury oxide (HgO) and lead oxide (PbO) sensors derived by particle sedimentation method were discussed. In the pursuit of this purpose, we investigated the electrical characteristics and the x-ray quantum efficiency of various thicknesses of HgO and PbO films in mammographic x-ray energy. We have therefore developed a particle-in-binder sedimentation method of fabricating large area polycrystalline films onto transparent glass substrates coated with indium tin oxide. We are currently optimizing the growth method to improve the quantum efficiency with the ultimate goal of obtaining as quantum efficiency close to that of single crystal performance. Our future efforts will concentrate on optimization of large area film growth techniques specifically for deposition on a-Si:H flat panel readout arrays.