• Title/Summary/Keyword: 총 변형량

Search Result 98, Processing Time 0.026 seconds

A Study on Mixing of Silicon Nitride Fine Powder and Binder System for Ceramic Injection Molding (세라믹 사출성형을 위한 질화규소 미세분말과 결합체 시스템의 혼합에 대한 연구)

  • 윤재륜
    • The Korean Journal of Rheology
    • /
    • v.2 no.1
    • /
    • pp.67-78
    • /
    • 1990
  • 세라믹 분말의 사출성형성을 평가하기 위하여 다양한 혼합체 시스템에 대한 혼합도 와 유변학적 성질을 질화규소 미세분말의 부피비를 변화시키면서 조사하였다. 열가소성 결 합체 시스템은 폴리에틸린 폴리에틸렌 왁스 그리고 미소량의 첨가제를 혼합하여 사용하였 다. 혼합성능을 평가하기 위하여 비분산혼합에서는 총접촉면적비를 그리고 분산혼합에서는 총파괴표면적비를 혼합척도로서 사용하여 정성적으로 모형화하였다. 사용된 혼합기내의 유 동장을 해석하기 위하여 뉴우톤유체를 가정하여 유동해석을 수행하였다. 혼합물의 혼합도는 각각 5분 30분 동안 혼합된 시편을 주사전자현미경 사진에 의해 관찰하여 평가하였다. 또한 혼합물의 사출성형성 그리고 혼합질 점도 토우크 곡선 사이의 관계를 규명하기 위하여 전단 변형를 속도를 따른 점도를 모세관 점도계를 사용하여 측정하였으며 질화규소의 부피비가 60%일 때까지는 만족할 만한 성형성과 혼합질을 가짐을 알 수 있었다.

  • PDF

Deformation of Cage Nets against Flow Velocity and Optimal Design Weight of Sinker (우리형 그물의 유속에 따른 변형 및 적정 침자량)

  • 김태호;김재오;김대안
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.37 no.1
    • /
    • pp.45-51
    • /
    • 2001
  • In order to investigate the optimal design weight of sinkers for preventing cage net from deforming in current, the model experiment on 2 types of square cage nets with different S sub(n)/S, the ratio of total area of netting projected to the perpendicular to the water flow S sub(n) to wall area of netting S, and 4 kinds of sinkers was carried out in circulation water channel. The model cage nets were made in 1/10 scale and the total weight in water of 4 sinkers attached to each corner of their bottom frames was 18, 54, 90, and 126g, respectively equivalent to 0.1, 0.3, 0.5, and 0.7 kg per unit area of prototype net. The results obtained can be summarizes as follows; Due to the deformation of each net where it was lifted towards the surface in severe conditions, its volume was reduced. This depended highly on the weight of sinkers placed in the bottom corner of cage nets, even if the variation of S sub(n)/S had a little effect on their deformation in current less than 0.4 m/s. In addition, it was observed that the total weight of sinkers for preventing the net from deforming to the extent of less than 50% inside its initial volume was 31 to 245 kg in the range of 0.3 to 0.6 m/s and the adequate design weight of sinker was approximately 0.5 kg per its unit area.

  • PDF

Flow Tests of Sandy-Clay Column due to Increasing Water Content and Their Simulation Using Particle Method (함수비 증가에 따른 모래질 점토기둥의 붕괴실험 및 입자법 시뮬레이션)

  • Park, Sung-Sik;Chang, Han
    • Journal of the Korean Geotechnical Society
    • /
    • v.30 no.11
    • /
    • pp.25-37
    • /
    • 2014
  • Clay or sand does not exist alone but various sizes of soil are mixed in the field. In this study, the effect of water content on large deformation of such mixed soils is studied by using soil column tests and a particle method. A soil column with 7 cm in diameter and 13 cm in height, which was made out of kaolinite with sand content of 0, 10, 25, or 50%, was tested for large deformation. Its deformation was monitored with time. While increasing its water content from 40, 60, to 80%, a total of 12 types of soil column tests were carried out. The particle method simulated their deformation with time. A maximum plastic shear modulus, which was a function of undrained shear strength and plasticity index for soils with different water contents, was associated with soil viscosity to simulate large deformation of soil column. When a sand content of soil column was constant, the deformation of soil column increased with increasing water content. When a water content of soil column was constant, large deformation occurred with increasing the sand content. The maximum deformation, which was 22 cm in diameter, was observed in the case of water content of 80% and sand content of 50%. The particle method was able to relatively well simulate such large deformation and stress change of soils.

The Settlement Behavior of Dynamically Compacted High Rock Embankment (고성토 암버력 동다짐 지반의 침하거동)

  • Jie, Hong-Keun;Bae, Kyung-Tae;Noh, Jeong-Huyn;You, Kwang-Ho
    • Journal of the Korean GEO-environmental Society
    • /
    • v.13 no.4
    • /
    • pp.61-69
    • /
    • 2012
  • A high rock embankment by means of phased dynamic compaction has hardly carried out in Korea. Settlement of each layer is measured in order to verify the settlement behavior of dynamically compacted high rock embankment. A high rock embankment is generally constructed by dividing into several sub-embankments. Such a sub-embankment and dynamic compaction may induce an increase of pressure at the lower part of embankment and cause a different behavior of ground from initial status. In this study, settlement of a high rock embankment is estimated using a hyperbolic model taking into construction history. The results from prediction are compared with those obtained from field measurements. And second creep settlement is predicted using pre-loading test.

Research about Optimal Design of Artificial Recharge (지하수 인공함양 최적개발 연구)

  • Jung, Euntae;Park, Namsik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.116-116
    • /
    • 2017
  • 지하수 인공함양은 수자원확보 및 비상시 용수를 목적으로 세계적으로 연구 및 프로젝트가 진행되고 있다. 인공함양의 방법에는 여러 가지의 방식이 있지만 본 연구는 관정을 통해 주입하는 ASTR(Aquifer Storage Transfer and Recovery)방법을 이용하여 연구하였다. ASTR이란 지표수를 인공적인 방법으로 대수층에 주입시키고, 일정기간 저장시키거나 유하시킨 후 양수하는 방법이다. 염수로 포화된 피압대수층에 담수를 주입하여 염수를 치환할 수 있는 주입-양수 시스템을 연구하였다. 염수로 포화된 대수층에서 인공함양기술을 성공시키기 위해서는 양수정으로 유입되는 염수비율이 0%을 만족하며, 주입으로 인한 수위상승량은 지반변형을 일으키지 않는 최소한의 값을 가지는 것이다. 본 연구는 앞서 언급한 인공함양기술을 성공시키기 위해 지하수 흐름모델과 최적화 모델을 결합한 최적전산모델을 이용하여 모의하였다. 지하수 흐름모델은 경계면모델을, 최적화 기법은 GA(Genetic Algorithm)을 이용하였다. 구축된 목적함수로는 양수정의 담수비율 최대화, 주입정에서의 수위상승량 최소화 그리고 양수개시시간 최소화로 구성하였다. 제약조건으로는 총 주입량 및 양수량 그리고 주입 및 양수정 개수이다. 서술한 목적함수와 제약조건을 만족하는 주입/양수정의 위치 및 유량을 최적전산모델로부터 얻을 수 있다. 기존 지하수 인공함양 및 개발은 사례별 연구 또는 전문가의 주관적 판단에 의존하는 경향이 있었다. 본 연구는 최적화 기법을 통해 복수의 관정에서 정량적인 산정이 가능하다. 현재 모델링에 의존한 연구로써 한계가 있지만, 추후 실제현장에 적용하여 모델 검정을 통해 신뢰도를 높이며 지하수 인공함양 개발에 많은 공헌을 할 수 있을 것으로 예상한다.

  • PDF

A Comparison of Various Energy and Protein Concentrations in Diets on the Performance, Bone Mineral Density and Blood Characteristics of Broiler Chicks

  • Choe, Ho Sung;Um, Jae Sang;Ryu, Kyeong Seon
    • Korean Journal of Poultry Science
    • /
    • v.40 no.4
    • /
    • pp.369-377
    • /
    • 2013
  • Two experiments were conducted separately with different concentration of dietary energy and protein to evaluate the performance, blood characteristics and bone mineral density (BMD) of broiler chicks. In experimentr 1, a total of 480 heads one-day-old Ross ${\times}$ Ross broiler chicks were randomly divided into 6 treatments (5 replications; 16 birds/pen). Three concentration of ME (3,000, 3,100 and 3,200 kcal/kg) and two of CP (pre-starter 22, 23%, starter 20, 21% and finisher 18, 19%) in a $3{\times}2$ factorial arrangement of treatments were used. In experiment 2, similar chicks and CP concentration was used but ME concentration was changed (pre-starter; 3,000, 3,050 and 3,100 kcal/kg, starter; 3,050, 3,100 and 3,150 kcal/kg, finisher; 3,100, 3,150 and 3,200 kcal/kg) in the diet. In both experiments, 10 blood and tibia samples were collected per treatment and blood characteristics and BMD were analyzed. In experiment 1, weight gain and feed intake were increased by the 3,000 kcal/kg ME in the diet (P<0.05). Serum total protein and albumin levels were increased numerically with the level of CP in the diet. Total cholesterol and HDL content were increased numerically with the energy content in the diet. Consistently in experiment 2, weight gain was increased numerically by the energy and protein level (prestarter $3,000{\times}23$, starter $3,050{\times}21$ and finisher 3,100 kcal/kg ME and 19% CP) in the diet. Serum glucose level was increased with the energy level in the diet (P<0.05). Therefore, serum total protein, albumin, triglycerides, total cholesterol and HDL contents were tended to increase with the energy increments in the diet.

Detection of Genetically Modified Genes from Soybean Sprout Products (콩나물에서 발견된 유전자 변형 도입 유전자의 비의도적 혼입 조사)

  • 윤성철
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.49 no.3
    • /
    • pp.227-231
    • /
    • 2004
  • A total of 219 polymerase chain reaction tests of genetically modified (GM) DNA sequences in soybean seeds and soybean sprouts were conducted during 2000-2001. No CM gene was found in 96 tests of soybean seeds. However, either a functional CP4EPSPS gene or the 355 promoter gene was found three times in 2000 and eight times in 2001, in between 0.01 and 0.17% of soybean spout products, in 123 tests. Since the amount of GM genes was much less than the threshold limit of 3%, none of the 11 positive soybean-sprout samples needed to be libeled GM crops. Of these, seven sprout samples were from domestic seeds and four were from seeds imported from China. To find the contamination route, the raw materials, seed surface, floor of the storage room, area around the selection machine, surface of the packaging film and corn powder used in the package were tested. The 35S promoter gene was detected in only two samples of the corn powder (0.1%). Although we could not find the cause of the GM contamination, the sprout package film is one possibility. In total,8.9% of the soybean sprout tests were GM positive, but the amounts were much less than the threshold of 3%. This means that there are frequent false-positives and these would threaten the sprout industry if GMO were decided qualitatively. Food companies should make their safety data available to the public and make an effort to address people's concerns about GM food more openly. In addition, there is a need to establish a quantitative test for GM genes in sampled water and a sampling method for raw materials.

Effects of Instant Coffee on Weight, Plasma Lipids, Leptin, and Fat Cell Size in Rats Fed on a High Fat Diet (커피를 고지방식이에 첨가하였을 때 흰쥐의 체중, 혈중 지질 및 leptin 농도와 지방세포의 크기에 미치는 영향)

  • Kang, Keum-Jee;Choi, Sung-Sook;Han, Hye-Kyoung;Kim, Kwan-Jung;Kwon, So-Young
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.3
    • /
    • pp.478-483
    • /
    • 2004
  • Effects of instant coffee on weight, plasma lipids, leptin levels, and fat cell size in high-fat diet-fed rats were investigated, Twenty-four male Sprague-Dawley rats, fed experimental diet containing 40% total dietary fat and 0, 0.6, 1.2, and 2.4% (w/w) instant coffee for 6 weeks, were divided into four experimental groups (n = 6). Feed efficiency ratio of 0.6% coffee group was higher than control group. Weight gain, organ weights, free fatty acid level, and fat cell size were not significantly different among groups. Triglyceride, total cholesterol, HDL-cholesterol, and leptin levels in plasma were significantly higher in 0.6% coffee group than control group. No significant difference in feed efficiency ratio, triglyceride, and leptin levels were found between control and 2.4% coffee group. These results suggest instant coffee may not have effect on obesity.

Shape Deformation Monitoring for VLBI Antenna Using Close-Range Photogrammetry and Total Least Squares (근접사진측량과 Total Least Squares를 활용한 VLBI 안테나 형상 변형 모니터링 방안 연구)

  • Kim, Hyuk Gil;Yun, Hong Sik
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.34 no.1
    • /
    • pp.99-107
    • /
    • 2016
  • In order to maintain the precise positioning accuracy of the VLBI system, the shape deformation found in antenna structure should be monitored. In fact, reduced the antenna gaining of an electromagnetic wave reception from the Quasar has been particularly expected due to the shape deformation of main reflector in VLBI antenna. Therefore, the importance of shape deformation monitoring for the main reflector has been significantly increased. The main reflector has come out as the high potential for deformation in the VLBI structure. The fact has led us to investigate the monitoring system for the main reflector based on the efficient algorithm in accordance with the close-range photogrammetry, which of expecting to be utilized as the continuous and automated monitoring system for the structure deformation in the near future. Ten fitting lines were estimated with the TLS for feature points of distributed in all directions from the main reflector. The resultant intersection point of estimated fitting lines was calculated by using the nearest point calculation algorithm, based on those non-intersection lines. Following to the intuitive basis for the time series analysis, the results was able to provide the calculation of numerical variation in the intersection point, which is represented in 3-axis,; that we are expecting to open the way for predicting a deformation rate as well as deformation direction

Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis (구조 해석을 통한 크루저 보드의 형상에 따른 융합 기술연구)

  • Lee, Jung-Ho;Cho, Jae-Ung
    • Journal of the Korea Convergence Society
    • /
    • v.6 no.4
    • /
    • pp.99-105
    • /
    • 2015
  • In order to prevent the environmental pollution nowadays, the mobile device for one person of cruiser board not used with the fossil oil has been noticed. This study aims to analyze the property of cruiser board due to the shape by carrying out the structural analysis for the safe design of cruiser board. Two models of the existing cruiser board and the cruiser board with new configuration are designed. As the structural analysis was carried out by using the finite element analysis program, the durability by deformation, stress and fatigue life was investigated. In the study result, the model of cruiser board with new configuration has the maximum deformation of 0.000971mm, the maximum stress of 0.936MPa and the fatigue life from 1827.7Cycle to $1.887{\times}105Cycle$. As all study result values at the new model became better than the existing model, the new model was seen to become more adequate at using than the existing model. This study result can be contributed to the safer and durable design of cruiser board. And it is possible to be grafted onto the convergence technique at design and show the esthetic sense.