• 제목/요약/키워드: 총구속도

검색결과 6건 처리시간 0.019초

공중파열탄용 포탄에 묻혀있는 탐지코일의 직경에 의한 유도전압 변화 (Diameter Effect of Induced Voltage in Sensing Coil Buried in Projectile for Application of Air Bursting Munition)

  • 류권상;남승훈;정재갑;손대락
    • 한국자기학회지
    • /
    • 제26권2호
    • /
    • pp.62-66
    • /
    • 2016
  • 포탄에 묻혀있는 탐지코일에서 유도되는 전압으로부터 총구를 떠나는 포탄의 초기속도를 계산하기 위하여 링 형태의 자석, 요크 및 탐지코일로 모델을 구성하였다. 자기장 해석에 의해 탐지코일의 유도전압에서 구한 마스터 곡선으로부터 포탄의 초기속도를 구할 수 있다. 탐지코일의 유도전압은 포탄에 묻혀있는 탐지코일 직경의 크기에 영향을 받는데, 직경의 크기가 증가하면 유도전압도 비례하여 증가한다. 탐지코일에서 유도되는 전압의 직경 효과를 감안한 초기속도 변화에 대한 정보를 입력하면 목표에서 포탄이 정확하게 폭발할 수 있다.

와전류 탐촉자를 이용한 총구 탄속 측정에 관한 연구 (Study on the Projectile Velocity Measurement Using Eddy Current Probe)

  • 신준구;손대락
    • 한국자기학회지
    • /
    • 제25권3호
    • /
    • pp.83-86
    • /
    • 2015
  • 무기체계가 첨단, 고도화되면서 탄약을 정밀 제어하여 목표를 타격하기 위하여 공중폭발탄(ABM)이 개발되어 전장에서 운용되고 있다. 이러한 공중폭발탄의 시한정밀도를 향상시키기 위하여 총구를 이탈하는 탄의 속도를 측정하여 표적까지의 정확한 비행시간을 계산한 후 탄에 입력하여야 한다. 본 연구에서는 K4 기관총의 소염기 부분에 탄을 감지할 수 있는 장치를 도입하였다. 탄약의 주요 금속 부품은 신관 부분의 알루미늄과 파편 효과를 발휘하는 탄체의 철 부분, 총열의 강선부를 통과할 때 직진운동을 회전운동으로 전환시키는 회전탄대의 구리로 구성되어 있는데 알루미늄 부분을 탐지하기 위하여 와전류 탐촉자의 원리를 도입하였다. 탄이 총구를 벗어나는 수십 us 동안 탄속을 측정하기 위하여 U 자형의 MnZn Ferrite 코어에 코일을 권선하여 200 kHz의 교류 전류를 인가하여 탄의 총구 이탈 속도를 측정하였으며, 도플러 레이더와 병행 계측한 결과 ${\pm}1%$ 이내에서 잘 일치하였다.

탄저압력계수를 이용한 5.56mm 소총의 압력-이동거리 곡선 산출 (A Study on the Pressure-travel Curve of 5.56mm Rifle Obtained from the Empirical Base Pressure Factor)

  • 이상길;이강영
    • 한국군사과학기술학회지
    • /
    • 제10권3호
    • /
    • pp.208-216
    • /
    • 2007
  • As the propellant mass is being accelerated out of the gun chamber along with the projectile, a continuous pressure gradient exists between the end of chamber and the base of the projectile. For this reason, the base pressure-travel curve is very important to design a conventional gun barrel in the interior ballistics, but it is not obtained briefly by empirical or theoretical method. In this paper, a simple relation between chamber pressure and base pressure was determined by the factor of base pressure(Cb) obtained from the experimental method. The simple relation gives a reasonable prediction for the reduction of pressure between the breech and the base of projectile owing to the axial gradient in the gun tube. The predictions have been validated by the infrared screen sensor and the PRODAS(PROjectile Design and Analysis System) for interior ballistic systems. Therefore, the base pressure-travel curve could be calculated from the chamber pressure measured by piezoelectric sensor. The base pressure-travel curve obtained from the simple relation offers initial information to gun barrel designer and is used for calculation of muzzle velocity.

개인화기 총열 표면처리 및 시험에 관한 연구 (Study on Surface Treatment and Test over the Barrel of Small Arms)

  • 채제욱;김인우;이영신
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.722-727
    • /
    • 2004
  • This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.56mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability

  • PDF

소구경 총열 표면처리에 관한 연구 (Study on Surface Treatment over the Barrel of Small Arms)

  • 채제욱;김인우;이영신
    • 한국군사과학기술학회지
    • /
    • 제7권1호
    • /
    • pp.5-12
    • /
    • 2004
  • This paper includes the comparative study between Cr plating and nitriding process with an aim at improving corrosion, wear and maintainability for KNR(Korean Next Generation Rifle) 5.5mm barrel. The endurance test was conducted to compare the performance of standard barrel, Cr plating barrel and nitriding barrel. Main activities are described as follows; optimal Cr plating and nitriding process set-up for KNR 5.56mm barrel; durability test of each barrel(20,000 rounds); salt water immersion test; dispersion, initial velocity, inner diameter data acquisition. According to the results of this firing test, Cr plating barrel is superior to standard barrel and nitriding barrel in view of corrosion, wear and maintainability.

공기권총 사격 자세에 대한 우수선수와 비우수선수간의 운동학적 분석 (The Kinematical Analysis between the Skilled and the Unskilled for Air Pistol Shooting Posture)

  • 김유미;김갑선
    • 한국운동역학회지
    • /
    • 제19권3호
    • /
    • pp.509-517
    • /
    • 2009
  • 본 연구는 공기권총 사격자세에 대한 운동학적 요인을 규명하여 지도자 및 선수들에게 훈련의 기초자료를 제공하여 경기력 향상에 기여하는데 있다. 이를 위해 5년 이상 남자사격선수 3명을 우수집단(나이: 18years, 신장: 174.0cm, 경력: 5.3yr, 기록: 573.3)으로, 경력 3년이하의 남자사격선수 3명을 비우수집단(나이: 17.3years, 신장: 173.7cm, 경력: 3.0yr, 기록: 557.7)으로 선정하였다. 공기권총 사격자세의 운동학적 변인을 살펴보기 위해 4대의 디지털비디오카메라(VX 2100, Sony)를 활용하여 사격동작을 촬영하였으며 사격의 실제기록과 조준지역의 이동을 살펴보기 위해 코칭머신을 활용하였다. 공기권총 사격시 국면별 소요시간은 우수선수가 비우수선수에 비해 더 긴 것으로 나타났다. 조준에서 격발까지의 인체중심과 총구의 변위는 우수선수가 비우수선수에 비해 상하 방향을 제외한 전후 좌우방향움직임을 더 작게 하는 것으로 나타나 상하움직임의 영향이 결국 속도변인에 영향을 미치고 있었다. 코칭머신의 궤적 내 이동과 시간은 우수선수가 비우수선수에 비해 작게 나타나 조준에 정확성이 비우수선수에 비해 더 우수한 것으로 나타났고 점수 또한 높게 나타났다.