• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.343-347
• /
• 2012

The decomposition behaviors of gaseous cyanides in non-thermal plasma-catalyst hybrid reactor have been investigated with the variation of discharge power, influent concentration of cyanide, humidity of air carrier and packed materials in the reactor. Destruction of cyanides by plasma only process was very difficult compared to that of trichloroethylene. But the destruction efficiencies of cyanides were dramatically improved through packing alumina or Pt/alumina bead in the plasma discharge region. From the results, it could be assumed that thermal catalytic effect is involved simultaneously with plasma in the reaction of cyanides destruction on the alumina or Pt/alumina packed plasma reactor.

• Clean Technology
• /
• v.24 no.4
• /
• pp.371-379
• /
• 2018

The objective of this study is to develop a platinum/hexaaluminate pellet catalyst for the decomposition of eco-friendly liquid propellant. Pellet catalysts using hexaaluminate prepared by ultrasonic spray pyrolysis as a support and platinum as an active metal were prepared by two methods. In the case of the pellet catalyst formed by loading the platinum precursor onto the hexaaluminate powder and then adding the binder (M1 method catalyst), the mesopores were well developed in the catalyst after calcination at $550^{\circ}C$. However, when this catalyst was calcined at $1,200^{\circ}C$, the mesopores almost collapsed and only a few macropores existed. On the other hand, in the case of a catalyst in which platinum was supported on pellets after the pellet was produced by extrusion of hexaaluminate (M2 method catalyst), the surface area and the mesopores were well maintained even after calcination at $1,200^{\circ}C$. Also, the catalyst prepared by the M2 method showed better heat resistance in terms of platinum dispersion. The effects of preparation method and calcination temperature of Pt/hexaaluminate pellet catalysts on the decomposition of liquid propellant composed mainly of ammonium dinitramide (ADN) or hydroxyl ammonium nitrate (HAN) were investigated. It was confirmed that the decomposition onset temperature during the decomposition of ADN- or HAN- based liquid propellant could be reduced significantly by using Pt/hexaaluminate pellet catalysts. Especially, in the case of the catalyst prepared by the M2 method, the decomposition onset temperature did not show a large change even when the calcination temperature was raised at $1,200^{\circ}C$. Therefore, it was confirmed that Pt/ hexaaluminate pellet catalyst prepared by M2 method has heat resistance and potential as a catalyst for the decomposition of the eco-friendly liquid propellants.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.407-414
• /
• 2016

Ex-situ catalytic pyrolysis of a Korean native oak tree over microporous zeolites (HZSM-5, HBeta, and HY) was performed by using a fixed bed reactor. The effect of sample to catalyst ratio and reaction temperature was also investigated to optimize production conditions of high quality bio-oil. Among three catalysts, HZSM-5 showed the highest aromatic formation due to its proper pore size and strong acidity. Although HY and HBeta also showed the catalytic activity, they produced larger amounts of coke due to their larger pore size. The smaller ratio of the sample to the catalyst and higher reaction temperature were also required to maximize the yields of aromatic hydrocarbons via the catalytic pyrolysis of oak tree over HZSM-5.

• Applied Biological Chemistry
• /
• v.48 no.2
• /
• pp.115-119
• /
• 2005

The catalytic hydrolysis reactivities of dinuclear nickel (II) complex, ${\mu}-aquapentaaqua[{\mu}-3,6-bis(6'-methyl-2'-pyridyl)pyridazine]chlorodinickel\;(II)$ trichloride trihydrate (APNT) for bis(p-nitrophenyl) phosphate (BNPP) as a DNA model compound were investigated. The dissociation constants of APNT were $pKa_1=7.9$ and $pKa_2=9.6$, respectively. The hydrolysis rate constant of BNPP compound by APNT was showed the rate enhancement of about 370,000 times in the case of none catalyst at pH 7.0 and $50^{\circ}C$. Based on the findings, we proposed the catalytic cycle for the hydrolysis of BNPP by APNT complex. The metal ions of dinuclear nickel (II) complex significantly enhance the transfer rate of phosphoryl group in the catalytic process and the water molecules as nucleophile and proton transfer agent act in different steps.

• Journal of the Korean Chemical Society
• /
• v.41 no.12
• /
• pp.682-710
• /
• 1997

Photocatalysis, which can be applied to get energy economically, to synthesize useful materials, and to remove environmentally harmful materials by transforming solar energy to chemical energy, has many advantages over conventional heterogeneous catalysis. In this review article, both heterogeneous and homogeneous photocatalyses were discussed focusing on the principles of photocatalysis, the modification of the photocatalysts, hydrogen formation by water decomposition, and environmental application of photocatalysis.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.261-268
• /
• 2010

In this account, three synthetic methodologies that serve as the basis for new strategies for the preparation of selected natural products are briefly introduced. One process, involving ruthenium carbene catalyzed ring rearrangement metathesis developed by Grubbs and his coworkers, transforms alkene-tethered cycloalkenes to thermodynamically more favored alkene-tethered cycloalkenes. Another ruthenium carbene promoted reaction, referred to as dienyne metathesis, was uncovered in early studies by Grubbs and his collaborators. This process converts dienynes to fused bicyclic conjugated dienes. Finally, a novel photo-electrocyclization reaction of pyridinium salts, which leads to the formation of 4-aminocyclopenten-3,5-diol derivatives, is discussed. Examples are provided to show the utility of these methodologies in natural product synthesis. Emphasis is given to studies in which pyridinium salt photochemistry is coupled with ring rearrangement and dienyne metathesis in routes for the synthesis of polyhydroxyalted indolizidine alkaloids and the construction of the tricyclic core of the lepadiformine and cylindricine alkaloids.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.452-457
• /
• 2005

Foam-type MFI zeolite catalyst was prepared by dispersing fine ($-0.2{\mu}m$) particles of MFI zeolite on silicalite foam. Catalytic cracking of n-octane was investigated over the foam-type catalyst and Delplot method was employed to interpret product compositions for deducing reaction mechanism. The Si/Al molar ratio of dispersed MFI zeolite was estimated 25 and its dispersed amount of silicalite foam was 25 wt％. Since the apparent density of the foam type catalyst was very low $0.11g{\cdot}cm^{-3}$, the catalyst loading amount could be varied from 0.02 g to 0.5 g without concerning pressure drop, providing a wide variance in the residence time of the reactants and products. The conversion and olefin yield in the catalytic cracking of n-octane increased with the catalyst loading. The product composition was very simple and could be explained by applying the protolytic cracking mechanism when the catalyst loading was small. Higher loading of the catalyst brought about further reactions of cracked products, accumulating lower olefin and paraffin with low reactivity in product stream and resulting in complex product composition.

• 한국전기화학회:학술대회논문집
• /
• 2005.07a
• /
• pp.341-346
• /
• 2005

펄스 도금 조건이 Co 도금층의 미세 구조 및 알칼리 $NaBH_4$ 용액의 수소발생특성에 미치는 영향을 조사하였다. 펄스 주기 및 최대전류밀도가 증가함에 따라 polyhedral 형상의 Co 결정립이 triangular형상으로 변화하였으며, 점차 결정립이 조대화 되어, 촉매 표면적이 감소하였다. 결국 알칼리 $NaBH_4$ 용액 내에서 가수분해반응에 참여하는 촉매 site가 감소하여 수소발생속도가 낮아졌다. 펄스도금시간이 증가함에 따라 Co 결정립의 크기가 점차 증가하여 촉매 표면적이 감소하였고, 가수분해반응에 참여하지 못하는 CO의 양이 증가하여 수소발생속도가 크게 감소하였다. 최대전류밀도 $0.1\;A/cm^2$, 펄스 주기 2 mS에서 10 s 동안 펄스 도금 시, $25^{\circ}C\;1\;wt.\%\;NaOH\;+\;10\;wt.\%\;NaBH_4$ 용액에서 $2140\;ml/min{\cdot}g-catalyst$의 높은 수소발생속도를 가지는 것으로 나타났다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.168.1-168.1
• /
• 2017

화석연료를 대체하기 위한 에너지원으로서 수소에너지에 대한 연구가 활발히 진행되고 있다. 수전해는 무한 청정한 물을 전기분해하여 수소를 생산하는 기술로써 대표적으로 알칼리 수전해(alkaline water electrolysis, AWE)와 고분자 전해질막 수전해(polymer electrolyte membrane water electrolysis, PEMWE)가 있다. 그 중, AWE는 알칼리 분위기에서 물분해 반응이 진행되어 촉매의 부식 위험성이 비교적 낮기 때문에 상대적으로 저렴한 비귀금속 산화물 촉매를 사용할 수 있다는 장점이 있다. 본 연구에서는 비귀금속인 Cu, Co를 이용하여 $CuCoO_4$를 합성한 후 산소 발생 촉매 물질로 활용하여 산소 발생 반응(Oxygen Evolution Reaction, OER)특성을 고찰하였다.

• Korean Chemical Engineering Research
• /
• v.43 no.6
• /
• pp.668-674
• /
• 2005

It is reported that a method for the hydrogen production from the propane decomposition using carbon black as a catalyst is more effective than from the methane decomposition. Since the by-products like CO and $CO_2$ are not produced by the direct decomposition of propane, it is considered as an environmentally sustainable process. In this study, hydrogen was produced by the direct decomposition of propane using either commercial activated carbon or carbon black at atmospheric pressure in the temperature range of $500-1,000^{\circ}C$. Resulting products in our experiment were not only hydrogen but also several by-products such as methane, ethylene, ethane, and propylene. Hydrogen yield increased as temperature increased because the amount of those by-products produced in the experiment was inversely proportional to temperature. The achieved hydrogen yield at $750^{\circ}C$ with commercial DCC N330 catalyst was 22.47％ in this study.