• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.41-49
• /
• 2012

This study was aimed at the development of catalysts for the direct methanol synthesis by partial oxidation of methane. Mo-Bi-V-Al mixed oxide catalysts were prepared and characterized and used in the direct methanol synthesis reaction. The catalysts prepared by the sol-gel method had much larger surface areas than those prepared by the co-precipitation method. The larger the surface area was, the less the methanol selectivity was. The catalysts having larger surface area facilitate the complete oxidation of methane, decreasing the selectivity of methanol. The catalysts prepared by the sol-gel method showed higher methanol selectivity of 13% at $20^{\circ}C$ lower temperature than those prepared by the co-precipitation method. Through XRD analysis, it was revealed that the structures of the catalysts prepared by the two methods were different. In the reaction, methanol selectivity increased and carbon dioxide selectivity decreased with pressure due to the suppression of complete oxidation reaction at a high pressure.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.649-655
• /
• 2013

Methanol was directly produced by the partial oxidation of methane with perovskite and mixed oxide catalysts. Perovskite ($ABO_3$) catalysts were prepared by the malic acid method with changing A and B site components. Three-component mixed oxide catalysts that have Mo and Bi as a main component were prepared by the co-precipitation method. Among the perovskite catalysts, $SrCrO_3$ showed the highest methanol selectivity of 11% at $400^{\circ}C$. For the three-component mixed oxide catalysts, there were no remarkable changes in methane conversion. Among the mixed oxide catalysts, Mo-Bi-Cr mixed oxide catalyst showed the highest methanol selectivity of 15.3% at $400^{\circ}C$. The catalytic activity and methanol selectivity of the three-component mixed oxide catalysts were directly proportional to the surface area of the catalysts.

• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.34-47
• /
• 1999

본 연구에서는 촉매상에서 메탄의 산화시 발생되는 반응열을 이용하고 반응생성물과 미반응 메탄과의 개질반응에 의해 합성가스의 수율을 증대시키기 위하여 연소촉매와 개질촉매를 연속적으로 배치한 hybrid 촉매상에서 개질촉매에 따른 메탄의 부분산화반응의 반응 특성과 합성가스 수율에 미치는 영향을 관찰하였다. 메탄의 산화를 위해서 Pt-Rh/cordierite 촉매를 사용하였으며, 개질촉매로는 상업용 개질촉매인 R67, ICI46-1, 수성가스 전환반응촉매인 LX821 촉매와 6 wt% Ni/cordierite 촉매를 사용하였다. 실험결과 연소촉매와 개질촉매를 연속적으로 사용한 경우 메탄의 산화 과정에서 생성된 CO2 및 H2O가 미반응 메탄과의 개질반응 촉진으로 인하여 합성가스이 수율이 증가됨을 확인할 수 있었다. 이때 생성되는 합성가스의 H2/CO 몰비는 온도에 따라 감소하는 것으로 나타났으며, 80$0^{\circ}C$에서 촉매에 따라 2.2~2.8의 값을 가짐을 알 수 있었다. 개질촉매로 R67 및 Ni/cordierite 촉매를 사용하였을 경우 가장 높은 합성가스의 수율을 얻을 수 있었으며, 연소촉매와 개질촉매의 질량비는 1:1~1:2에서 가장 높은 수율의 합성가스를 얻을 수 있었다. 메탄과 산소의 몰비가 2:2에서 메탄의 전환율과 수소 수율이 가장 높게 나타났으며 메탄의 몰비 증가에 따라 감소되는 경향을 보였다.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.256-264
• /
• 1999

The performance of the Pt-B/cordierite catalysts (2 wt%) Pt, 70 wt% Alumina, 28 wt%) Ceria and Zirconia, B: base metal) loaded with 6∼12 wt% Mn, Cu, V, Co, Cr and Ba, respectively was studied for partial oxidation of methane reaction and compared with that of Ni loaded catalyst. As a results, it was found that Ba, Co, Cr as well as Ni loaded catalysts showed higher activity for methane partial oxidation of methane than the Mn, Cu and V loaded catalyst. But it was known that catalysts having good activity for methane showed the good activity for coke formation, too. A XRD analysis of the catalyst before and after the reaction using 5 wt% Ni/Al$_2$O$_3$) showed that there were three Ni phases. In these results, it was found that methane oxidation reaction occulted at the front of the catalyst bed consisted of NiAl$_2$O$_4$and NiO and reforming reaction occurred at the rear part of the catalyst bed consisted of reduced Ni.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.499-502
• /
• 2008

고정층반응기에서 니켈이 치환된 하이드로탈사이트($Ni_3Mg_3Al_2(CO_3)(OH)_{{16}{\cdot}n}H_2O$ ; n=3$\sim$5)를 합성하고 여기에 세리아를 첨가 후 소성하여 얻은 촉매를 사용하여($Ce_xNi_3$-HTlc ; x=0.3$\sim$1.2) 메탄의 부분산화 반응실험을 수행하였다. 세리아가 첨가되지 않은 촉매는 반응 초기 활성이 세리가가 소량 첨가된 ($Ce_{0.3}Ni_3$-HTlc) 촉매보다 우수하였으나 장시간 반응에서는 차차 활성이 저하되었으나, $Ce_{0.3}Ni_3$-HTlc의 활성은 30시간까지 일정하게 유지 되었다. 세리아 함량이 많아 질수록 촉매 활성은 점차 저하되었으며, $Ce_{1.2}Ni_3$-HTlc 는 촉매활성이 매우 낮았다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.04a
• /
• pp.39-40
• /
• 1993

부분 산화반응에 주촉매로 사용되는 바나듐($V_2O_5$)을 담체 내부에 코팅하기위한 방법과 조건을 찾고, 제도된 바나듐막의 구조적 전자적 특성과 투과도 특성을 알아보며 이 바나듐막을 코팅한 막반응기를 이용하여 탄화수소의 부분 산화반응을 수행하여 그 반응특성을 알아보았다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.04a
• /
• pp.54-55
• /
• 1995

무기막은 고분자막에 비해서 고온에서의 사용이 가능하고 구조적 안정성 등이 우수한 특징이 있다. 이러한 무기막에 촉매를 담지하거나 코팅하여 분리막의 역할과 촉매로서의 역할을 동시에 수행하는 막반응기로의 응용이 가능하다. 본 연구에서는 Redox mechanism에 의한 부분산화반응을 일으키는 촉매인 오산화바나듐을 sol-gel법으로 코팅한 무기막을 제조하여, 막내부에 오산화바나듐의 격자산소를 이용하는 부분산화 반응물이 존재할 때 선택적으로 증가하는 산소의 투과특성을 조사하였다.

• Clean Technology
• /
• v.18 no.1
• /
• pp.95-101
• /
• 2012

The Co and Ni catalysts supported on $Al_2O_3$ for partial oxidation of methane producing hydrogen were synthesized using impregnation to incipient wetness. And the promotion effects of metals such as Mg, Ce, La and Sr in partial oxidation of methane over these $Co/Al_2O_3$ and $Ni/Al_2O_3$ were investigated. Reaction activity of these catalysts for the partial oxidation of methane was investigated in the temperature range of 450~$650^{\circ}C$ at 1 atm and $CH_2/O_2$ = 2.0. The catalysts were characterized by BET, XRD and SEM/EDX. The results indicated that the catalytic performance of these catalysts was improved with the addition of 0.2 wt% metal promoter. The Mg promoted $Co/Al_2O_3$ catalyst showed the highest $CH_4$ conversion and hydrogen selectivity at higher temperature than $500^{\circ}C$. The Ce and Sr promoted Ni catalysts superior to Co-based catalysts in the low temperature range. The addition of metal promoter to $Co/Al_2O_3$ and $Ni/Al_2O_3$ catalysts increased the surface area.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.85-88
• /
• 2007

고정층반응기에서 여러 가지 전이금속으로 치환된 하이드로탈사이트($[M_xMg_{6-x}Al_2(OH)_{16}(CO_3)^{2-}]{\cdot}H_2O;$ M: 전이금속(Ni, Mn, Co, Cu, Zn) x: 전이금속 치환비($x=0.5{\sim}6$))를 합성하고 이를 소성한 후 메탄의 부분산화 반응에 사용하였다. 반응 시 도입되는 $CH_4/O_2$비는 2로 하고 $VHSV=120,000cm^3/g$ h, 온도를 $500^{\circ}C$ 부터 $50^{\circ}C$ 간격으로 하여 $800^{\circ}C$까지 수행하였다. 실험결과 다른 전이금속들 중에서 니켈로 치환된 촉매가 대체적으로 부분산화반응을 촉진시키는데 좋은 것으로 나타났으며, 실험 결과 니켈의 hydrotalcite 중의 치환비(x)에 따른 차이는 별로 없었다.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.269-275
• /
• 2021

In this study, ordered mesoporous silica-supported Ni catalysts were prepared for catalytic partial oxidation of methane (CPOM) by using electroless nickel plating method. Unlike conventionally impregnated catalysts, the electrolessly-plated nickel catalyst showed that nickel was highly dispersed and formed stably on silica-supported surface. It was verified by TEM-EDS analysis. During the activity tests, the electrolessly-plated nickel was barely sintered and the amount of carbon deposition was very small. Consequently, the catalyst was far less deactivated, while the sintering was significantly observed in the cases of the catalysts prepared by the conventional impregnation method. Regarding the palladium-promoted catalysts, the reducibility of nickel was increased, and the reaction performances were enhanced in terms of CH4 conversion and H2/CO ratio of produced syngas.