• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.49-56
• /
• 2005

Hot firing performance test of hydrazine decomposition catalyst used for monopropellant thruster of the satellite and the launch vehicle was performed. Test equipment for catalyst test was developed in collaboration with Hanwha Corp., reaction delay time, catalyst activity and granule stability of the catalyst firing performance were measured and analyzed with the equipment. In addition, the current development of prototype catalyst is introduced.

• Journal of Energy Engineering
• /
• v.10 no.1
• /
• pp.40-48
• /
• 2001

디젤엔진에 적합한 환경 친화적 연료로 평가받고 있는 디메틸에테르(DME)를 기존의 메탄올 탈수화에 의한 간접법 대신 합성 가스로부터 직접 합성법으로 제조하였다. 합성가스에서 메탄올을 합성하는 경우에 비해 화학 평형 상의 이점 때문에 DME를 합성하는 것이 경제적이며 이는 실험 결과와 일치하였다. 기상 반응기에서 메탄올 탈수촉매의 부가에 의한 메탄올 환산 생산량은 메탄올 합성촉매에 의한 생산량에 비해 두 배 이상의 증가를 보인다. 메탄올 탈수촉매를 Cu로 개질한 효과는 없었으며, 메탄올 탈수촉매로서 순수 감마알루미나가 가장 우수한 반응성을 보였다. 반응 조건이 25$0^{\circ}C$, 30atm일 때 고려된 GHSV 범위에서 촉매 적정 혼합비는 7:3, 합성 가스의 조성비는 $H_2$/CO=1일 때 가장 좋은 선택도와 수율을 나타내었다.

• Journal of Energy Engineering
• /
• v.10 no.1
• /
• pp.49-54
• /
• 2001

최근 자동차용 청정 연료로서의 이용 가능성으로 주목받는 디메틸에테르를 액상 혼합 반응기에서 직접 합성 가스로부터 합성하였다. 메탄올 함성촉매와 감마알루미나의 혼성촉매를 사용한 결과, $H_2$/CO=1일 때, 메탄올 함성 촉매와 탈수촉매의 비가 8:2인 경우, 가장 높은 메탄옥 환산 생산량을 보였다. 또한 공간속도의 변화에 따른 디메틸에테르, 메탄올, 이산화탄소, 메탄 등 각 생성물에 대한 선택도의 변화는 거의 없이 일정하였다. 메탄옥 합성 반응 촉매만을 사용한 경우, 생성물 중 각 성분의 선택도는 반응가스의 공간속도에 따라 달라졌는데, 반응가스의 공간속도가 작아지면 생성물 중 디메틸에테르의 선택도는 변화가 없었으나, 이산화탄소의 발생량이 많고 메탄올의 생성이 적어졌다. 동일한 반응 조건에서 액상 반응과 시강 반응을 비교한 결과, DME 수율이 액상의 경우가 더 높았다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.173-176
• /
• 1998

FCC (Fluid Catalystic Cracking) 장치는 중질유의 원유와 잔사유로부터 가솔린과 heating oil. 디젤연료 제조 등에 사용되고 있다. 이 장치는 50년 동안 fine-powder 유동화에 중요하게 응용되고 있으며, 현재 세계적으로 약 350여 개의 장치가 조업되고 있다. FCC 장치에서 미세한 분해촉매는 촉매에 의한 중질유의 분해가 일어나는 상승관 (riser)과 촉매의 재생이 일어나는 재생반응기(regenerator) 사이에서 높은 속도로 순환되고 있다. (중략)

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.49-50
• /
• 1994

상호 불용성인 용매에 녹아있는 반응물들 간의 반응은 각 물질이 상 경계면을 뛰어 넘기가 어려워 매우 느린 속도로 진행된다. 그러나 상호 불용성인 비균질계에 상이동 촉매라는 제 3의 물질을 첨가하면 반응은 급격히 향상된다[1, 2]. 따라서 본 연구에서는 클로로벤젠 상의 브로모 옥탄이 TBABr(Tetra Butyl Ammonium Bromide) 이온 촉매의 존재 하에 수용액상의 요오드 이온과 반응하는 평판형 막반응기를 대상으로 수치모사를 수행하여 그 결과를 Stanley와 Quinn[3]의 실험값 및 수치모사치와 비교하였으며, 막 반응기의 모듈 선택, 설계 및 운영, scale-up시 고려되어야 할 사항들을 탐색연구하여 보았다.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.45-51
• /
• 2001

Catalytic combustion is the environmental-friendly technology, which has been applied to a variety of areas for industrial and domestic use in recent years. Accordingly, this study performed the development of the catalytic manufacturing technology for the high temperature and of the catalytic combustor in priority, which were aimed to be aimed to a commercialized condensing boiler. Palladium(Pd) of a noble meta] was used as a catalyst for the high temperature and supported on $alumina(Al_{2}O_{3})\;and\;zirconia(ZrO_2)$ in constant weight ratio. Activity of Pd catalysts is compared and analysed in the catalytic combustion of natural gas. The ratio of $Pd/Al_{2}O_{3}\;=\;4$ was found to be better than any other weight ratios in activity and durability. The performance examination of catalysts and of combustion through the plate-type combustor made it possible to be developed the cylindrical-type combustor which has increased combustion area. Catalytic combustion condensing boiler of 25,000 kcal/hr class was also developed, which had the optimum combustion condition at the no221e of 5.95mm and the orifice of 21mm. This condition was determined through the performance experiments of catalytic combustion condensing boiler to which the cylindrical-type catalytic combustor was applied.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.3
• /
• pp.330-336
• /
• 2005

The ozone injection method was proposed to improve the catalytic process for the removal of nitrogen oxides ($NO_x$). Nitric oxide (NO) in the exhaust gas was first oxidized to nitrogen dioxide ($NO_2$) by ozone produced by dielectric barrier discharge, and then the exhaust gas containing the mixture of NO and $NO_2$ was directed to the catalytic reactor where both NO and $NO_2$ were reduced to $N_2$ in the presence of ammonia as the reducing agent. A commercially available $V_2O_5-WO_3/TiO_2$ catalyst was used as the catalytic reactor. The $NO_2$ content in the mixture of NO and $NO_2$ was changed by the amount of ozone added the exhaust gas. The effect of reaction temperature, initial $NO_x$ concentration, feed gas flow rate, and ammonia concentration on the removal of $NO_x$ at various $NO_2$ contents was examined and discussed. The increase in the content of $NO_2$ by the ozone injection remarkably improved the performance of the catalytic reactor, especially at low temperatures. The present ozone injection method appears to be promising for the improvement of the catalytic reduction of $NO_x$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.74-77
• /
• 2009

Ignition performance tests were performed to develop a catalytic ignitor which used hydrogen peroxide and kerosene. Ignition characteristics were investigated by exit area of the catalytic bed, shape of kerosene injector and lead time of purge gas. The results showed that exit area of catalytic bed must be enough for non chocking condition and kerosene must be sprayed with swirl in the middle of catalytic bed. Also in case without preheating of catalytic bed, hydrogen peroxide must be leaded by 3sec, and purge gas must be supplied simultaneously or lately with kerosene.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.596-605
• /
• 2019

Proton-conducting perovskite ceramic materials are highly promising for solid electrolytes as well as catalysts at high temperatures. Therefore, they possess an outstanding potential for the membrane reactor in which both reaction and separation occur at a same time. Especially, in the case of hydrogen production catalyst, hydrogen separation, and the membrane reactor coupled with catalyst and separation, extensive results have been reported on the effect of the dopant in the solid electrolytes, temperature, and composition of reactants on the performance. In this review, the recent research trend on the application of proton-conducting ceramic materials to hydrogen production catalyst, hydrogen separation, and membrane reactor is surveyed. Moreover, the potential application and prospect of these materials to the next-generation hydrogen production and separation is discussed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.373-376
• /
• 2010

The characteristics of thermal-resistance catalyst for $N_2O$ propellant decomposition were studied in the present study. Si was added to the $Al_2O_3$ support to stabilize its surface area at high temperature (> $1000^{\circ}C$). Ru was used as a catalyst for $N_2O$ decomposition. The prepared catalysts were characterized using SEM, EDS and XRD analysis, and $N_2O$ conversion was measured as reaction temperatures. The Ru/$Al_2O_3$-Si catalyst showed better performance than Ru/$Al_2O_3$ catalyst.