• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.275-284
• /
• 2007

For the application to the numerical weather prediction (NWP) in active service, it is necessary to ensure that the GPS precipitable water vapor (PWV) data has less than one hour latency and three millimeter accuracy. The comparison and the verification between the daily products from GPS measurement by using the IGS final ephemeris and the conventional meteorological observation has been done in domestic researches. In case of using IGS final ephemeris, GPS measurements can be only post processed in daily basis in three weeks after the observation. Thus this method cannot be applied to any near real-time data processing. In this paper, a GPS data processing method to produce the PWV output with three mm accuracy and one hour latency for the data assimilation in NWP has been planned. For our new data processing strategy, IGS ultra-rapid ephemeris and the sliding window technique are applied. And the results from the new strategy has been verified. The GPS measurements during the first 10 days of January, April, July and October were processed. The results from the observations at Sokcho, where the GPS and radiosonde were collocated, were compared. As the results, a data processing strategy with 0.8 mm of mean bias and 1.7 mm of standard deviation in three minutes forty-three seconds has been established.

• Clean Technology
• /
• v.13 no.4
• /
• pp.266-273
• /
• 2007

The adsorption properties of the activated carbon-based adsorbents were studied to remove COS emitted from $SO_2$ catalytic reduction process on the integrated gasification combined cycle (IGCC) system in this work. Transition metal supported catalysts and mixed metal oxide catalysts were used for the $SO_2$ catalytic reduction. The mechanism of COS produced from the $SO_2$ reduction and the COS concentration s according to the reaction temperature were investigated. In this study, an activated carbon and a modified activated carbon doped with KOH were used to remove the very low concentration of COS effectively. The adsorption rate and the breakthrough time of COS were measured by a thermo gravity analyzer (TGA, Cahn Balance) and a fixed bed flow reactor equipped with GC-pulsed flammable photometric detector (PFPD), respectively. It was confirmed that the COS breakthrough time of the activated carbon doped with KOH was longer than that of an activated carbon. In conclusion, the modified-activated carbon having a high surface area showed a high adsorption rate of COS produced from the $SO_2$ reduction.

• Journal of IKEEE
• /
• v.18 no.4
• /
• pp.544-551
• /
• 2014

This paper suggests an algorithm to measure low-level radiation by radiation measuring devices, and the other algorithm to improve reaction speed of the device to better respond to dramatic changes in radiation amount. The former algorithm to improve the accuracy of measuring low-level radiation takes advantage of a dual window radiation measurement method which is based on accumulated average of pulses gathered by a radiation measuring sensor. The latter algorithm is to enhance reaction speed of a measuring device to more sensitively react to dramatic changes in radiation amount by adopting a dual window radiation measurement method which analyzes data patterns newly put into for six seconds. To verify the suggested algorithms, a hardware-which consists of sensor and high-voltage generator, controller, charger and power supply circuit, wireless communication part, and display part-was used. Tests conducted on the dual window radiation measurement method as used in the suggested algorithm have proved that accuracy improves to measure low-level radiation of 5uSv/h, and linearity also gets better. Other tests were conducted to see whether the suggested algorithm enhances the reaction speed of a radiation measuring device so that the device responds better to dramatically changing radiation amount. The experimental results have shown meaningful changes in numbers after six seconds. Therefore, the conclusions are made that the algorithm enhances the reaction speed of the device.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.263-273
• /
• 2008

The precision of sensors' position is particularly important in the application of road extraction or digital map generation. In general, the various ranging solution systems such as GPS, Total Station, and Laser Ranger have been employed for the position of the sensor. Basically, the ranging solution system has problems that the signal may be blocked or degraded by various environmental circumstances and has low temporal resolution. To overcome those limitations a IMU/range integrated system could be introduced. In this paper, after pointing out the limitation of extended Kalman filter which has been used for workhorse in navigation and geodetic community, the two sampling based nonlinear filters which are sigma point Kalman filter using nonlinear transformation and carefully chosen sigma points and particle filter using the non-gaussian assumption are implemented and compared with extended Kalman filter in a simulation test. For the ranging solution system, the GPS and Total station was selected and the three levels of IMUs(IMU400C, HG1700, LN100) are chosen for the simulation. For all ranging solution system and IMUs the sampling based nonlinear filter yield improved position result and it is more noticeable that the superiority of nonlinear filter in low temporal resolution such as 5 sec. Therefore, it is recommended to apply non-linear filter to determine the sensor's position with low degree position sensors.

• Development and Reproduction
• /
• v.5 no.1
• /
• pp.59-71
• /
• 2001

Since the first radioimmunoassay (RIA) was developed in 1970s, many conventional RIAs and non-isotopic immunoassays (NIA) had been developed in which the degree of precision, accuracy, specificity and practicability have progressively increased. Recently ultrasensitive assay method at femtogram to determine testosterone in serum, saliva and feces is required for the study of sexual dysfunctions in male and female, monitoring the psychological stress and conditions, aging process such as menopause and partial androgen deficiency in aging male, the hormonal changes of small experimental animals etc. This review discussed the recentd evelopments of steroid assay methods, based upon the testosterone assay results of authors far 20 years, and the problems associated the assay set-up, the characterizations and applications of the established procedures, and desifls of assay, reliablity criteria, and the practical aspects of assay set-up and application, based upon the data of the authors. The present study demonstrates the general problems methods to be consider in order to set up the highly sensitive assay methods and to increase the assay quality and the necessity of assay quality control program. To improve the assay quality of each laboratory and to compare the assay results in homeland, the national QC programs should be organized.

• The Korean Journal of Zoology
• /
• v.37 no.4
• /
• pp.554-564
• /
• 1994

세균이 세포내 공생하는 xD strain과 모 세포주인 tD strain Amoeba proteus의 열충격 대응의 차이를 알아 보기 위하여 방사선 동위원소로 표지된 아미노산을 Ca2+_less Chalkley's 용액에서 음작용 경로를 통하여 90분 동안 흡수하게 하고, 저온 및 고온 스트레스에 대하여 새로 합성되는 스트레스 대응 단백질의 양상을 1, 2차원 전기영동 및 자기방사 사진법에 의해서 비교하였다 저온(10"C) 충격에 대응하여 아메바는 두 strain 모두 56.0 kDa, pl 6.0 단백질을 강하게 발현하였으며, xD strain에서는 tD strain과 달리 저온 충격 초기에 66 0 kDa, pl 5.5 단백질의 발현이 중단되었다. 한편 고온(33"C) 열충격에 대하여 두 strain 아메바에서 모두 10여종의 단백질이 새합성되는 것으로 확인되었으며, tD 아메바에는 이들 단백질의 새합성이 완만하게 이루어지는데 비하여 xD 아메바에서는 그중 66.0 kDa 단백질이 고온 대응 단백질로서 신속하게 새합성되는 것으로 나타났다. 이외에도 2차원 전기 영동 분석을 통하여 열충격에 의해서 발현이 촉진되는 다수의 단백질들을 탐지하였다 탐지된 아메바의 열충격 단백질은 분자량에 따라 hsp100군 2종, hsp90군, 3종, hsp70군 및 hsp60군 각 1종, 그리고 small csp군 4종으로 분류해 볼 수 있었다 두 분석의 결과를 종합해 보면 tD 아메바에는 저온 및 고온 충격에 대하여 열충격 단백질의 합성이 완만하게 상승하는 데 비하여 xD strain에서는 신속하게 이루어졌다. 이상의 결과로 보아 아메바의 세포내 공생 세균은 숙주의 열충격 대응기작에 변화를 야기한 것으로 판단된다한 것으로 판단된다. 10mg과 20mg의 estrogen 처리구 사이에 유두 직경, 길이 그리고 용적의 증가량에 있어서는 차이가 없었다. 10mg 및 20mg의 estrogen 처리는 초발정일령을 각각 20일 및 124일 단축시켰다. 전체적으로 이러한 결과는 송아지에 estradiol의 삽입은 성장과 유선 발달을 촉진시키고 초발정일령을 단축시킬수 있다는 것을 강력하게 지적한다. 일치하지 않으므로 더욱 정밀한 조사를 실시하여 분류학상의 위치를 정확히 밝혀 볼 필요가 있을 것으로 생각되었다.연한 도구이자 정신활동으로 보게함으로써, 주제 및 연구방법에서 획일성보다 다양성과 창조성이 강조되고 있다. 그리고 연구에 있어서 주제 의 다양성을 통해 보다 현실생활에 밀접하게 연결되어야 할 필요성은 학문이나 과학의 사회 성에 대한 새로운 인식을 가져다 주고 있다. 이러한 지리교육과정의 좌표의 변화된 측면들 을 고려하여, 지리교육과정의 새로운 방향은 다음의 세가지로 모색될 수 있다. 첫째, 爭點中 心 地理敎育課程이다. 사회쟁점에 대한 접근은 쟁점의 이해와 문제해결에의 지리적 관점의 활용을 통해 학습내용의 시사성과 사실성을 높힐 수 있다. 이때 문제해결능력을 통해 현대 시민의 자질 및 능력을 기를 수 있음은 물론, 다른 한편으로 실제세계 즉 학생의 실생활, 사 회, 국가, 세계에서 일어나는 일들과의 관련성을 갖게 함으로써, 내적 동기화와 외적인 자극 을 강력하게 결합할 수 있을 것이다. 이는 개인적 유관적합성과 사회적 유관적합성을 동시 에 확보하는 데 유리할 것이다. 둘째, 思考中心 地理敎育課程이다. 지리교육은 학생들을 지 식 및 기능의 숙달자가 되도록 할 것이 아니라 기본적 문장해독력의 수준을 넘어 능력있는 사고자로 길러내는 것을 목표로 하여야 한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.170-170
• /
• 2013

형광체를 조명과 디스플레이 산업에 응용하기 위해서는 충분히 밝은 빛을 제공하는 형광체의 발광 세기가 중요한 변수이다. 이러한 발광 특성은 주로 모체 격자에 도핑 되는 활성제의 농도, 입자의 형상과 크기 분포의 균일성, 결정성에 따라 달라진다. 본 연구에서는 Ca2SiO4 모체 결정에 도핑한 활성제 Eu3+와 Dy3+ 이온의 농도를 변화시키면서 고상 반응법을 사용하여 높은 발광 효율을 갖는 Ca2-1.5xSiO4::Eux3+ 적색 형광체와 Ca2-1.5xSiO4:Dyx3+ 백색 형광체를 합성하였다. 특히, 활성제 Eu3+와 Dy3+ 이온 농도의 변화가 형광체의 결정 구조, 소성 온도, 입자의 표면 형상, 광학 스펙트럼의 발광 효율에 미치는 영향을 조사하여 최적의 합성 조건을 결정하였으며, 회절 신호의 반치폭과 발광 세기의 상호 관계를 조사하였다. Ca2-1.5xSiO4::Eux3+와 Ca2-1.5xSiO4:Dyx3+ 형광체 초기 분말 시료는 CaO (99.9% 순도), SiO2 (99.9%), Dy2O3 (99.9%)와 Eu2O3 (99.9%)인 화학 물질을 구입하여 초정밀 저울로 화학양론적으로 측정하였다. 이때 Eu와 Dy의 함량비는 x=0, 0.01, 0.05, 0.1, 0.15, 0.2 mol로 변화 시키면서 합성하였다. Ca2-1.5xSiO4: Dyx3+ 형광체 분말 시료의 경우에 소결 온도를 각각 $1000^{\circ}C$와 $1100^{\circ}C$로 달리하여 흡광과 발광 스펙트럼의 세기를 비교해 본 결과, 서로 다른 두 소결 온도에서 합성한 두 형광체 분말은 동일하게 Dy3+의 몰 비가 0.05 mol일 때 주 발광 스펙트럼의 세기는 최대값을 나타내었다. 파장 355 nm로 여기시킨 Dy3+ 함량비에 따른 Ca2-1.5xSiO4:Dyx3+ 형광체 분말의 발광 스펙트럼은 Dy3+ 함량비에 관계 없이 581 nm에서 가장 강한 황색 발광을 보였다. 함량비가 증가함에 따라 발광 스펙트럼의 변화가 관측되었는데, Dy3+의 몰 비가 0.01 mol~0.05 mol인 영역에서는 발광 세기가 증가하여 0.05 mol에서 최대를 나타내다가 Dy3+의 몰 비가 더욱 증가함에 따라 발광세기는 현저히 감소하는 경향을 나타내었는데, 이 현상은 농도 소광 현상으로 해석 할 수 있다. 이외에도, Eu3+와 Dy3+ 이온의 함량비와 소결 온도가 결정 입자의 크기와 흡광 스펙트럼에 미치는 결과를 조사하였다.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.63-70
• /
• 2021

Generating a super-resolution meteological data by using a high-resolution deep neural network can provide precise research and useful real-life services. We propose a new technique of generating improved training data for super-resolution deep neural networks. To generate high-resolution meteorological data with domain specific knowledge, Lambert conformal conic projection and objective analysis were applied based on observation data and ERA5 reanalysis field data of specialized institutions. As a result, temperature and humidity analysis data based on domain specific knowledge showed improved RMSE by up to 42% and 46%, respectively. Next, a super-resolution generative adversarial network (SRGAN) which is one of the aritifial intelligence techniques was used to automate the manual data generation technique using damain specific techniques as described above. Experiments were conducted to generate high-resolution data with 1 km resolution from global model data with 10 km resolution. Finally, the results generated with SRGAN have a higher resoltuion than the global model input data, and showed a similar analysis pattern to the manually generated high-resolution analysis data, but also showed a smooth boundary.

• Explosives and Blasting
• /
• v.37 no.2
• /
• pp.22-30
• /
• 2019

On sites where explosives are used, the effects of noise and vibration produced by the blast wave are subject to a number of operational restrictions. Recently, the number of civil complaints has increased and the standard of environmental regulations on secure goods has been greatly tighten. Therefore, work is generally carried out by machine excavation in case of close proximity of safety thing. Machine excavation methods have the advantage as reducing noise and vibration compared to blasting methods, but depending on the conditions of rock intended to be excavated, they are sometimes less constructive than planned. In general, the closer a rock type is to hard rock, the less constructible it becomes. In this paper, we are going to explain the construction of a construction section with a close proximity to a safety thing using electronic detonators. While the project site was designed with a machine excavation methods due to the close(9.9m) proximity of safety thing(the railroad), construction using electronic detonators was reviewed as an alternative method for improving rate of advance time and construction efficiency when expose to hard rock. Through blasting using electronic detonators, construction and economic efficiency were maximized while minimizing impact on surrounding safety things. Because $HiTRONIC^{TM}$, which is produced by Hanwha, has innovative stability and high explosion reliability, it is able to explode with high-precision accuracy. Electronic detonators are widely used in construction sites of railway or highway, other urban burrowing areas and large limestone mines.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.463-475
• /
• 2020

Presence of microplastics in soil and groundwater has recently been reported and environmental concerns are raised as to the plastic pollution. In the subsurface environment, clay minerals and metal oxide minerals are commonly found as finely dispersed states. Because the minerals have high sorption capacities for diverse pollutants, interactions with mineral surface play an important role in the transport of microplastics in groundwater. Accordingly, environmental mineralogy investigating the interactions between microplastics and mineral surfaces is the essential research area to understand the fate and transport of microplastics in the subsurface environment. The microplastic-mineral surface research requires molecular- to nano-scale analyses to be able to probe the relatively weak interactions between them. The current report introduces a nano-scale analysis tool called quartz crystal microbalance (QCM) that can measure the sorbed/desorbed mass of nanoplastics on mineral surfaces at the level of a few nanograms (~10-9 g). This report briefly reviews the main principles in the QCM measurement and discusses applications of QCM to the environmental mineralogy research.