• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.165-168
• /
• 1997

We have constructed a scanning confocal microscope using a 780 nm semiconductor laser, an actuator of a compact disk player and a quad-detector. This device detects heights and characteristics of a surface. The laser focus was located at the surface of a sample by using the error signal obtained by a quad-dector, and the current supplied to the actuator for lens was displayed as a height. The materials of a surface were classified according to reflected total intensities and was displayed by different color in a monitor. The device has very samll dimensions of 30 mm$\times$20 mm$\times$20 mm and scan field is 1.6 mm$\times$1.6mm. We obtained two images, one using only reflected light and the other using an error signal from a quad-detector and compared these two images.

• Journal of Korean Ophthalmic Optics Society
• /
• v.7 no.1
• /
• pp.63-67
• /
• 2002

In this paper we analyzed the optical property after we chose the lens system to cover a wide angular field which is designed to use a established designed meniscus negative outer element. The special quality of the system is to offer a wide angular field by getting only one outer negative element and to be a compacted optical system to utilize the good point of miniaturization and light-weighturization by using two aspheric surfaces. Also, we observed the aberration correction of a aspheric as we investigated two aspheric's forms to use for a aberration correction.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.392-398
• /
• 2003

We present a novel concept of a phase-shifting diffraction-grating interferometer, which is intended for the optical testing of concave mirrors with high precision. The interferometer is configured with a single reflective diffraction grating, which performs multiple functions of beam splitting, beam recombination, and phase shifting. The reference and test wave fronts are generated by means of reflective diffraction at the focal plane of a microscope objective with large numerical aperture, which allows testing fast mirrors with low f-numbers. The fiber-optic confocal design is adopted for the microscope objective to focus a converging beam on the diffractive grating, which greatly reduces the alignment error between the focusing optics and the diffraction grating. Translating the grating provides phase shifting, which allows measurement of the figure errors of the test mirror to nanometer accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.75-81
• /
• 2001

In this paper we analyzed the localization error of near-field detection algorithm in the sea. The near-field detection algorithms using triangulation and wavefront curvature basically assume a signal in two dimension of bearing and range. But the assumption causes localization error because there is three dimension of bearing, range, and depth in the sea. Even through three dimensional effect is considered, the localization error is occurred if multipath propagation in the sea is ignored. To analyze the localization error in the sea, we simulate the near-field localization using acoustic propagation model and focused beamforming considering wavefront curvature. The simulation results indicate that localization error always occurs in the sea and the error varied with sound velocity profile, water depth, bottom slope, source range, etc.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.108-118
• /
• 2003

Surface properties, including the texture and the luster, of cotton fibers and yarns thereof play an important role in textile technology. The convolutions and the cross-sectional shape of the cotton fiber affect the fabric texture and the luster accordingly. Mercerization of the cotton fabric affects the luster, strength, and other properties of the fabric. In this study, the effect of mercerization was examined on the luster of the cotton fabric, together with the effect of polishing treatment. One of the traditional methods determining the fabric luster is the use of glossmeter or goniometric glossmeter. The use of glossmeter gives successful results in determining the gloss of rather flat and continuous surface such as plastic sheet, painted surface, or paper products. Since the textile fabrics have diverse surface structures and textures, these could be regarded as having three-dimensional surface. Such complexity imposes some difficulties for differentiating subtle surface luster properties of diverse textile fabrics. The advancement in the area of imaging technologies has enabled the micro-scale analysis of the surface textures and the fabric luster recently. Using a CCD camera, the surface luster images were taken at various incident illumination conditions. Microscale analysis, including the blob analysis, of the images could differentiate the subtle luster properties present in a group of cotton fabric samples comprising mercerized cotton fabric, non-mercerized cotton fabric, polished cotton fabric, and a 'standard' cotton fabric. The glossmeter measurement gave satisfactory but limited differentiation among the samples, whose luster differences are easily recognizable with visual observation, except for the mercerized cotton fabric sample and the non-mercerized cotton fabric. The microscale analysis of the fabric luster could, therefore, help understand the nature of diverse textile fabric luster.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.4
• /
• pp.33-39
• /
• 2009

A microlens array (MLA) was developed based on the wet-etched quartz substrate and coating of UV adhesive on the substrate for maskless lithography application. The developed MLA has the focal length of ${\sim}45\;{\mu}m$ and the spot size of ${\sim}1\;{\mu}m$. The spot size of the focused beam passing through the MLA was detected by CCD camera, and its intensity was monitored by beam profiler. Uniform spots with nearly identical intensities were observed on the focal plane when a beam passes through the fabricated MLA. The focal length was varied depending on thickness of the coated UV adhesive. The thicker the thickness of the UV adhesive was, the shorter the focal length of the MLA was. With a general mask aligner, UV beam focusing was tested onto photoresist (PR). The beams were well focused onto PR when UV passes through the MLA. Depending on the variable distances from the MLA, beam sizes onto PR were controlled. Even at high temperature for a long time, the performances of the MLA were not changed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.1
• /
• pp.222-229
• /
• 2016

Active synthetic aperture sonar on the small UUV is generated several trajectory disturbances under the influences of underwater environments, and causing a large error in the synthetic aperture processing. In this paper, we analyzed the effects of azimuth resolution for the phase mismatch of the synthetic aperture focus processing when the periodic or random trajectory disturbances was generated on the side direction. The simulation results show that ghost targets are generated and azimuth resolution is very deteriorated when disturbance amplitude is greater than $0.3{\lambda}$ and disturbance period is greater than $2L_{sa}$ in the periodic trajectory disturbances environments. And detection performance on the seabed small objects by the synthetic aperture processing is shown that there is a significant effects on the azimuth resolution depending on the types and conditions of the platform trajectory disturbance variations.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.1
• /
• pp.93-100
• /
• 2001

We analyzed aspheric patterns after we investigated zoom lens' constructions and optical capacities of a ordinary designed 35mm camera with an aspheric zoom lens system in this research. As this lens system was the zoom lens system about infinite object point, it was made to get a short back focal length, be able to use a lens unit more close to the image plane, and be used the compact camera which got a viewing system. The zoom ratio of the system was 1 : 2 and it got a positive and negative power's distribution. As it was determined the 35~70 mm focal length range which the most common people used, it might be called economic optical system considered universality. As it was used two aspheric surface, it was used just three lens, compensated the aberration and schemed lens' miniaturization, lightweightization, and the decrease effect of the unit cost of production.

• Korean journal of communication and information
• /
• v.40
• /
• pp.249-286
• /
• 2007

This study examines the main characteristics and differences on people's page in selected four national dailies, such as Chosun Ilbo, Joongang Ilbo, Seoul Shinmum and Hankyoreh Shinmun. Both Chosun Ilbo and Joongang Ilbo are categorized as the conservatives; while Seoul Shinmum and Hankyoreh Shinmun as the progressive. This study has been done by applying methods of content analysis to reveal the differences in terms of people's occupations, types of reports, their philosophies, and standards of selecting people by the dailies for the people's pages. The results shows that the conservative newspapers are very similar to the progressive newspapers in terms of occupations and the types of reports, covering the people on people's pages. More specifically, both the conservative dailies and the progressive dailies report the people for whose jobs are related to both social and cultural works. However, the conservative newspapers have much more coverages than the progressive papers in terms of the publicity reporting on the people. The conservatives are also much more reports on the people who are eager to economic success than the progressive dailies; while the progressives papers have much coverages on those who are interesting in helping others than the conservatives papers. Finally, this study reveals that the conservative dailies mainly cover those who are in publicity activities and social elite groups, while the progressive newspapers are the social celebrities and persons of fame in society.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2311-2317
• /
• 2011

In this paper, we study the temperature change of a ${\mu}$-bolometer focal plane array with a capacitive transimpedance amplifier bias cancellation circuit. Thermal analysis is essential to understand the performance of a ${\mu}$-bolometer focal plane array, and to improve the temperature stability of a focal plane array characteristics. In this study, the thermal analyses of a ${\mu}$-bolometer and its two reference detectors are carried out as a function of time. The analyses are done with the $30{\mu}m$ pitch $320{\times}240$ focal plane array operating of 60 Hz frame rate and having a columnwise readout. From the results, the temperature increase of a ${\mu}$-bolometer in FPA by an incident IR is estimated as $0.689^{\circ}C$, while the temperature increase by a pulsed bias as $7.1^{\circ}C$, which is about 10 times larger than by IR. The temperature increase of a reference detector by a train of bias pulses may be increased much higher than that of an active ${\mu}$-bolometer. The suppression of temperature increase in a reference bolometer can be done by increasing the thermal conductivity of the reference bolometer, in which the selection of thermal conductivity also determines the range of CTIA output voltage.