• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1992

In this paper we report the fabrication of a planar optical wavehuide lens on a Y-cut LiNbO3 substrate by Ti_indiffusion and Ti-indiffused proton-exchange(TIPE). LiNbo3 planar waveguides are fabricated and refractive indices of the waveguides are fabricated and refractive indices of the waveguides are measured. Based on the measured indices, palanr waveguide lenses are designed and fabricated. The measured focal point and spot size of the fabricated lens are in good agreement with those of the designed lens.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.473-480
• /
• 2004

Recently, they are interested in the relation between night's vehicle accidents of drivers and the dynamic visual acuity at home and aboard. So, in this research, we tried to design an optical system of the inspection equipment to measure the dynamic visual acuity. A optotype standard did to Landolt's ring with 45mm of diameter and 9mm of gap to maintain the visual acuity of 1.0 in the 30m distance. An optical structure of the inspection equipment was composed of the sequence of an observer, a plus refraction lens system, a minus refraction lens system, and an optotype that was arranged to have characteristics that the size of the first virtual image of the optotype made by the minus refraction lens system grows bigger gradually according to the optotype movement to near distance from far distance, and also the first virtual image moves to the principle plane from the focal point of the plus refraction lens system as the size of the first virtual image arranged to the inside of focal distance of plus refraction lens system grows bigger gradually. As doing these processes, we completed the optical system of which characteristic is that the position of the final second virtual image moves to 3m from 50m as the size of the second virtual image made by the plus refraction lens system maintains to be regular.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.397-415
• /
• 2004

This study surveyed differences among KS, ISO, JIS and ANSI ophthalmic spectacle lenses standards. These standards applied to several lenses that were in common currency and we checked over problems and improvements in KS. KS corresponded to ISO, for the most part, and ANSI, partly. But terms, definitions, progressive power lenses standards, UV transmittance and base curves clauses did not exist in KS. There was no differences between nominal data and actual data in important clauses estimation-minimum requirements on refractive power, tolerances on the size of lenses, material and surface quality. But tolerances of thickness, base curves, UV and visible transmittance values were not existing, there were differences among several ophthalmic spectacle lenses in the test of these clauses. These requirements will be needed for better and more comfortable vision.

• Journal of Korean Ophthalmic Optics Society
• /
• v.6 no.2
• /
• pp.1-9
• /
• 2001

This research chose the existing designed copier zoom lens system and analyzed to calculate the optical capacity. As this lens system was the zoom lens system of finite object point, differed form the general camera zoom lens of infinite object point, it got a limited movement range because it moved between the fixed object and the image. In the result of comparison the optical capacities between a symmetric form and a asymmetric form. We could find out the truth which a asymmetric form constituted comparative stable aberrations and existed a tracks of effort for aberration correction. Therefore, a symmetric form is allotted satisfactorily from improved aberrations by itself in the fixed focal lens system. However, it has a limit of improving for capacity when it is used a zoom lens system got a symmetric form.

• Korean Journal of Optics and Photonics
• /
• v.7 no.1
• /
• pp.51-59
• /
• 1996

In this paper, we propose a new type of a planar waveguide lens, a meniscus lens instead of a plano-convex lens used widely for the optical integrated circuits such as optical numerical processors. A plano-convex lens has a spherical aberration caused by the linear boundary. In the proposed meniscus lens, this linear boundary is replaced by a circular-boundary, and the spherical aberration is removed. To test the performance of the proposed lens, a meniscus lens is designed using Fermat principle and fabricated on the Y-cut $LiNbO_3$ substrate. First a $Ti:LiNbO_3$ planar waveguide is fabricated on the $LiNbO_3$ substrate by Ti indiffusion. Then a meniscus lens is fabricated on the planar waveguide by TIPE(Ti indiffued proton-exchange) method. A plano-convex lens is also fabricated on the same substrate to compare the spot size at the focal point. The measured spot size of the meniscus lens is reduced to 59% that of the plano-convex lens. This result shows that the proposed meniscus lens is more effective for optical integrated circuits than the plano-convex lens.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.67-69
• /
• 2012

In this paper, electromagnetic scattering analysis of Fresnel Lens by using 2D FDTD method was performed. Fresnel lens which is consigured 7 diffracted conductors, and considered at 5GHz. As a result, axial gain characteristic corresponding to near design focusing distance at 0.71m is 26dB.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.5
• /
• pp.705-709
• /
• 2010

It is quite complex to draw the geometry of electron trajectories in electron optics because such trajectories have various aberrations that cannot be easily calculated. However, if we need to know roughly the geometry, the focal length and the principal planes in order to understand the properties of column, a simple numerical solution can be a useful method. We are developing the electron beam machining system based on SEM. In this paper, we show rough geometry, focal length and principal planes by a numerical solution for electron lens I in our column. These results will be utilized in developing a simulation program for electron optics.

• Journal of Korean Ophthalmic Optics Society
• /
• v.2 no.1
• /
• pp.55-60
• /
• 1997

Numerically compares a calculation about a variable process of visual acuity for a artificial myopia with previously the tested result. The calculation is used to the value of Gullstrand's theoretical eyes and a method of geometrical optics. The theoretical eye simplified a entrance pupil and retina. Optical lens and eye changed a equivalent lens. Refractive power of a equivalent lens is converted to focal length within theoretical eyes, and this was calculated about relation of a blur circle on the retina and visual acuity.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.68-74
• /
• 2017

To minimize chromatic variations across a wavelength band, we suggest a new design that corrects the first- and second-order wavelength derivatives of the refractive power. Based on this method, a diffraction-limited collimator is designed. The design is very stable against wavelength change, as expected. The chromatic change of the effective focal length is less than 0.002% in the wavelength range from 360 to 410 nm.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.101-103
• /
• 2019

기존 해상용 등명기의 경우 빛을 평행하게 만들기 위해 볼록렌즈를 정교하게 절삭하여 곡률을 제작하는 기술이 까다로워 해상용 등명기 제작비용이 비싼 프레넬 렌즈를 사용하고 있다. 따라서 프레넬 렌즈를 사용하지 않고 평행 광을 만들 수 있는 포물선 반사체(parabolic reflector)의 원리를 도입하였다. 포물선 반사체의 원리는 포물선 초점에 있는 LED 광원에서 빛을 반사체에 반사하여 평행 광을 만드는 원리이며, 포물선 반사체에 반사된 빛은 45° 기울기의 원뿔형 반사체에 한 번 더 반사되어 지표면과 평행한 빛을 360° 방향으로 균일하게 내보낸다.