• Title/Summary/Keyword: 초음파 전파

Search Result 215, Processing Time 0.025 seconds

Ultasonic Reflection Characteristics of the Underwater Corner Reflector (수중코오너리프렉터의 초음파반사특성에 관한 연구)

  • Lee, Dae-Jae;Sin, Hyeong-Il
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.19 no.1
    • /
    • pp.25-32
    • /
    • 1983
  • The corner reflector is used to increase the echoing area of radar targets in the air, and it can also be applied to increase the echoing area of the sonar targets under water. As the basic research for this application, the authors investigated the ultrasonic reflection characteristics under water for the corner reflector which was made of aluminum plate. The experiments were made by pulse measuring method with the magnetostrictive ferrite transducers of 28, 50 and 75KHz in the experimental water tank. The results obtained are as follows; 1. The target strength of corner reflectors were increased in proportion to the diameter and were greater at higher frequency of 75KHz than at lower frequency of 28KHz. 2. In the case of 5 corner reflectors of 150mm in diameter which have corner angles of 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$ and 90$^{\circ}$the measured values of the maximum target strength at 75KHz were-25.0 dB, -17.2dB, -15.1dB, -13.4dB and 11.0dB, and then the number of main lobes showing the maximum target strength in the backscattering patterns were 24, 12, 8, 6 and 4, respectively. 3. When 7 corner reflector of 80mm in diameter and 90$^{\circ}$ in the corner angle was located on the minor axis of the horizontal section with directional angles of 0$^{\circ}$, 2.5$^{\circ}$, 5.0$^{\circ}$, 7.5$^{\circ}$, 10$^{\circ}$ and 12.5$^{\circ}$ against the sound beam axis, the measured values of the target strength on each position at 75KHz were -21.2dB, -21.9dB, -26.0dB, -30.5dB and -36.8dB, respectively.

  • PDF

New Drug Delivery System Based on a Laser-Induced Shockwave (레이저 유도 충격파를 이용한 첨단 약물전달시스템 개발)

  • Han, Tae-Hee;Lee, Hyun-Hee;Gojani, Ardian B.;Yoh, Jai-Ick
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.34 no.1
    • /
    • pp.67-71
    • /
    • 2010
  • Impingement of a high power laser pulse (above 1 GW/$cm^2$) on a metal foil causes its ablation, which is characterized by a rapid expulsion of matter and the initiation of a strong shock wave inside the solid metal. The shock propagates through the foil and reverberates on the rear side, causing its deformation and microparticle ejection, which were deposited on the foil prior to ablation. Based on this principle, we are developing a new drug delivery system - Biolistic gun. Current study is focused on the controllability, stability, efficiency of the system, and characterization of the penetration shapes in various conditions. We have tested the system by applying direct and confined ablation. Several different media combinations were used for confinement-BK7 glass, water, BK7 glass with water, and succulent jelly(ultrasono jelly, RHAPAPHRM). Biological tissue was replicated by a 3% gelatin solution. Present data shows that the confinement results in enhancement of penetration shape reached by 5 um cobalt microparticles. Based on the analysis of the experimental results we observe that the penetration shape of microparticles can be controlled by adjusting the thickness of confinement media.

A study on the slip-up speed of a shaft using heating slip form (히팅슬립폼을 적용한 수직구 구조물의 상승속도에 관한 연구)

  • Ko, Eomsik;Lee, Sanghun;Park, Jongpil;Zi, Goangseup;Kim, Changyong
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.21 no.6
    • /
    • pp.811-823
    • /
    • 2019
  • Slip form method is applied to many cases of a shaft these days because it is safer, more economical and faster than cast-in-place method. Slip-up height of the method is approximately 2.5 to 4.0 m/day. If the temperature of concrete is outside the range of 10 to 30℃, the effects of changes in strength or elastic characteristics are significant. Therefore, it is difficult for slip-up speed to be higher than 3 m/day during winter construction. In addition, concrete has heat caused by hydration, which causes temperature cracking of hardened concrete. Therefore, temperature control of concrete curing is necessary for the continuous slip-up of slip form. In this study, the rebound hardness, time of ultrasonic waves propagation, heat of hydration, and external temperature are measured by developing heating panels and test devices for the continuous slip-up. Based on this, heating slip form is manufactured; this was applied to "Kimpo sites" and "Sinwol sites". The compared slip-up speed samples were 1.9 m/day or 0.200 m/hr on average at Gimpo sites (08:00~17:30) and 2.0 m/day or 0.210 m/hr at Sinwol sites.

Application of a Fiber Fabry-Pérot Interferometer Sensor for Receiving SH-EMAT Signals (SH-EMAT의 신호 수신을 위한 광섬유 패브리-페롯 간섭계 센서의 적용)

  • Lee, Jin-Hyuk;Kim, Dae-Hyun;Park, Ik-Keun
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.34 no.2
    • /
    • pp.165-170
    • /
    • 2014
  • Shear horizontal (SH) waves propagate as a type of plate wave in a thin sheet. The dispersion characteristics of SH waves can be used for signal analysis. Therefore, SH-waves are useful for monitoring the structural health of a thin-sheet-structure. An electromagnetic acoustic transducer (EMAT), which is a non-contact ultrasonic transducer, can generate SH-waves easily by varying the shape and array of magnets and coils. Therefore, an EMAT can be applied to an automated ultrasonic testing system for structural health monitoring. When used as a sensor, however, the EMAT has a weakness in that electromagnetic interference (EMI) noise can occur easily in the automated system because of motors and electric devices. Alternatively, a fiber optic sensor works well in the same environment with EMI noise because it uses a light signal instead of an electric signal. In this paper, a fiber Fabry-P$\acute{e}$rot interferometer (FFPI) was proposed as a sensor to receive the SH-waves generated by an EMAT. A simple test was performed to verify the performance of the FFPI sensor. It is thus shown that the FFPI can receive SH-wave signals clearly.

Epidemiological Changes and Clinical Features of Hepatitis A in Children, Living in Kyung-gi Province, Since 1988 to 1998 (최근 10년간(1988~1998) 경기지역 소아에서 A형 간염의 역학적 변화 및 임상에 관한 연구)

  • Kim, Hyun;Kim, Jong Hyun;Kim, Dong Un;Hur, Je Kyun;Lee, Won Bae;Seo, Byung Kyeu;Kang, Jin-Han
    • Pediatric Infection and Vaccine
    • /
    • v.5 no.2
    • /
    • pp.230-238
    • /
    • 1998
  • Purpose : Worldwidely, the incidence of the hepatitis A has been markedly decreased in the past years. Also in Korea, there has been only a few sporadic cases without evidence of epidemics since the mid 1980s. However, the incidence of the hepatitis A in young adults and childen has been in trends of increasing since 1996. So, we retrospectively performed the study on the epidemiolgical changes and the clinical feature of hepatitis A in childen, living in Kyung-gi province, since 1988 to 1998. Methods : The four affiliated hospitals of the Catholic University of Korea, Our lady of Mercy's hospital, Holy family hospital, Eui-Jung-bu St. Mary's hospital, and St. Vincent hospital, were enrolled in this study. We conducted statistical analysis on the incidence of hepatitis A since 1988 to 1998, concerning with the period (monthly, annually), age, sex and related epidemiological property, by reviewing the hospital records of the patients with hepatitis A. We simultaneously performed the study concerning with the clinical characteristics of hepatitis A. Results : 1) During the study period, 46 children was diagnosed as hepatitis A, and among them 28 children (60.1%) developed sporadically in the 1998. And sex ratio was 1.2(male):1(female). 2) Most of the patients developed between March and July, and hepatitits A were mainly developed in the patients above the 10 year old ages(37 patients; 80.4%). 3) The socioeconomic and educational status of the patient's parents was almostly below the middle and low class. Although, we could not find the etiological factors in most cases, but we found the evidence of interfamilial transmission in one family. 4) The patients complained the symptoms of nausea and vomiting, jaundice, poor appetite, mild fever, fatigueness, abdominal pain, URI symptom, dyspepsia, dark urine, headache and diarrhea in order, and findings of jaundice, hepatomegaly, RUQ tenderness, splenomegaly and LLQ tenderness in order were seen. 5) All patients showed abnormal findings of the liver function tests, and the pattern of cholestatic hepatitis were seen in most cases, but these findings were normalized within the 2~4 weeks. The findings of the gall bladder wall thickening, hepatomegaly, splenomegaly and ascites were seen on abodominal sonogram. 6) The prognosis of all patients were good without complications, except in one case who had the episode of transient recuurence. And the mean hospitalization dates were 11.1 days. Conclusion : We found that the incidence of hepatitis A showed the increasing trend, and peaked in the 1998 in Kyung-gi province children. And hepatitis A mainly developed in children above the 10 year old ages. The scioeconomic and educational status of patient's family was almostly below the middle class. All of them showed abnormal liver function, and clinically cholestatic hepatitis features were seen in most cases. But, the prognosis was excellent without complication in all cases.

  • PDF