• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2261-2266
• /
• 2011

Being the most widely used in ultrasound Doppler color flow mapping, the Kasai algorithm, also known as lag-1 autocorrelation method, is capable of estimating the Doppler mean frequency relatively accurately with a modest amount of computation. Particularly in the case of imaging deep lying areas, however, its performance suffers due to low signal-to-noise ratios. The purpose of this paper is to propose a dealiased lag-2 autocorrelation method which is superior to the Kasai algorithm even at low signal-to-noise ratios and to compare their performances through simulations. The proposed algorithm is found to be better by about 2 to 3 dB than the Kasai algorithm in terms of Doppler mean frequency estimation error in the presence of measurement noise.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.114-121
• /
• 2009

Ultrasonic guided waves have been widely utilized for long range inspection of structures. Especially, development of array guided waves techniques and its application for long range gas pipe lines(length of from hundreds meters to few km) were getting increased. In this study, focusing algorithm for array guided waves was developed in order to improve long range inspectability and accuracy of the array guided waves techniques for long range inspection of gas pipes, and performance of the developed techniques was verified by experiments using the developed array guided wave system. As a result, S/N ratio of array guided wave signals obtained with the focusing algorithm was increased higher than that of signals without focusing algorithm.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.501-510
• /
• 2000

Recently, advanced signal analysis which is called "time-frequency analysis" has been used widely in nondestructive evaluation applications. Wavelet transform(WT) and Wigner Distribution are the most advanced techniques for processing signals with time-varying spectra. Wavelet analysis method is an attractive technique for evaluation of material characterization nondestructively. Wavelet transform is applied to the time-frequency analysis of ultrasonic echo waveform obtained by an ultrasonic pulse-echo technique. In this study, the feasibility of noise suppression of ultrasonic flaw signal and frequency-dependent ultrasonic group velocity and attenuation coefficient using wavelet analysis of ultrasonic echo waveform have been verified experimentally. The Gabor function is adopted the analyzing wavelet. The wavelet analysis shows that the variations of ultrasonic group velocity and attenuation coefficient due to the change of material characterization can be evaluated at each frequency. Furthermore, to assure the enhancement of detectability and naw sizing performance, both computer simulated results and experimental measurements using wavelet signal processing are used to demonstrate the effectiveness of the noise suppression of ultrasonic flaw signal obtained from austenitic stainless steel weld including EDM notch.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.10-17
• /
• 2007

The echo signal on ultrasonic transducer is a mixed signal from tissues, blood vessel walls, blood cells and noise. In this mixed-signal, the signal reflected from tissues and blood vessel walls is called clutter. It is necessary to extract pure blood signal from this mixed-signal, when measuring blood flow velocity with medical ultrasonic system The quality of measured blood flow velocity is highly dependent on sufficient attenuation of the clutter signals. In this paper, we suggest a clutter rejection method using ICA For simulation, the echo signals are generated by Field n ultrasonic simulation program In this echo signals, independent signals are separated by using ICA Then the blood signal is obtained from the separated signals. Blood flow velocity is measured by 2D autocorrelation method. We compare ICA clutter rejection method with PCA-based eigen filter method using both measured blood flow velocity profiles by 2D autocorrelation. In simulation results, ICA clutter rejection method can be better applied measuring blood flow velocity in noisy echo signals.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.7-12
• /
• 1998

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.389-391
• /
• 2013

본 논문에서는 초음파 검사자가 효율적으로 충수염을 진단할 수 있도록 하기 위하여 초음파 영상에서 충수를 추출하는 방법을 제안한다. 충수를 추출하는 과정은 초음파 영상에서 Ends_in Search Stretching 기법을 적용하여 명암 대비를 강조하고, Max-Min 이진화, 영역 레이블링, 잡음 제거, Cubic Spline 보간법을 적용하여 복부 근육의 하단 근막 부분을 추출한다. 초음파 영상에서 추출된 근막 영역을 제거한 후, K-Means 클러스터링과 영역 레이블링을 적용하여 충수 영역을 추출한다. 제안된 방법을 초음파 영상을 대상으로 실험한 결과, 충수염을 진단하기에 적합한 충수 영역이 추출되는 것을 영상의학과 전문의를 통하여 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3227-3229
• /
• 1999

수신된 초음파 파형이 표준 파형과 정합되는 시간을 수신 시점으로 사용함으로써 정확한 거리측정을 가능하게 하는 초음파 센서 거리계의 성능 개선을 제안하였다. 근거리 측정용으로 많이 사용되는 초음파센서는 다른 거리측정 시스템에 비해 하드웨어 구현이 용이하고 가격이 저렴한 장점이 있으나 센서 수신부측 Limit 회로의 threshold level의 선택 문제에 따른 거리 측정의 오차와 소음에 의한 거리 측정 오차가 매우 큰 문제가 되고 있다. 본 논문에서는 수신된 초음파 파형에 표준 파형을 정합하여 최대의 정합값을 가지는 시점을 수신 시간으로 간주하여, 소음환경비서도 거리 측정이 가능한 파형 정합 방법을 제한하였다. 본 논문의 실험을 통하여, 잡음이 심한 소음환경에서도 제안한 파형 정합 방법이 Threshold 방법 보다 초음파센서 거리 측정 성능이 개선됨을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.2
• /
• pp.9-15
• /
• 2011

In this paper, we propose a method to extract the external oblique muscle of abdomen images that is often excluded by previous method due to image distortion. In the preprocessing phase of the proposed method, we emphasize the brightness contrast with Ends-in search stretching algorithm after removing noise from the initial ultrasonic images. Then we apply average binarization in vertical direction to extract candidate fascia areas. After removing other areas than fascia with morphological characteristics, the lost part in the fascia during the process is restored with such characteristic information and location information. Then the skin area is also removed with information from the arc appearing in convex filming and the candidate muscle areas are extracted by overlapping two results two way up-down search algorithm. Another noise removing process is done to determine the muscle area. In case of obtaining obscure result, after restoring the muscle area by smearing method, the thickness of the muscle is measured by min square method. The experiment verifies that the proposed method is sufficiently effective to analyze the size and shape of muscles in abdomen in ultrasonography than previously used methods.

• Journal of Advanced Navigation Technology
• /
• v.20 no.3
• /
• pp.196-202
• /
• 2016

In this paper, a stationary wavelet transform method is proposed for improving the altitude control performance of quadrotor UAV using an ultrasonic rangefinder. A ground tests are conducted using an ultrasonic rangefinder that is much used for vertical takeoff and landing. An ultrasonic rangefinder suffers from signal's spike due to specular reflectance and acoustic noise. The occurred spikes in short time span need to be analyzed at both sides time and frequency domain. It was known that stationary wavelet transform is the transferring solution to the problem occurred by down sampling from DWT also more efficient to remove noise than DWT. The analyzed spikes of the ultrasonic rangefinder using a stationary wavelet transform and experimental results show that it can effectively remove the spikes of the ultrasonic rangefinder.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.672-675
• /
• 2010

초음파 영상은 다른 의료 진단 방법에 비해 상대적으로 비용이 적게 들고 데이터 획득이 용이하기 때문에 널리 이용되고 있다. 초음파 영상은 획득 방법에 따라 화질이 차이가 난다. 고식적 초음파 영상에 비해 두 배의 주파수를 사용하는 하모닉 영상은 대조도나 해상도가 향상되고, 영상 내 잡음이 감소한다. 그래서 초음파 영상을 이용한 진단 과정에서 병변의 특징을 육안으로 정확하게 관찰할 수 있고, 이를 통해서 진단 결과의 정확성이 향상된다. 본 논문에서는 초음파 영상의 획득 방법의 차이에 따른 진단 성능의 차이를 컴퓨터를 이용한 병변 분류 성능을 통해서 비교했다. 이를 위해서 초음파를 통해서 획득한 영상에서 병변의 형태 및 질감 특징을 추출하고, 이를 바탕으로 병변을 분류하는 시스템 구성하였다. 실험을 통해서 하모닉 초음파 영상을 이용한 컴퓨터 기반 분류 방법이 고식적 초음파를 이용한 방법에 비해서 6% 정확성 향상이 있는 것을 확인하였다.