• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.525-532
• /
• 2017

The system is consisted of arduino and sensors for protecting bicycle and safety of driver. The speed indicator is composed of speed alarms which are less than 15km/h, 15~30km/h, over 30km/h through limit switch. At that time, the accuracy is 96.6% compared to actual speed. Also, It gives a person warning ablut the obstacle of 5cm tall through ultrasonic sensor in night. Auto Lock System is operated to protect bicycle and the text message is sent to the user, if the bicycle lock was broken. This system puts emphasis on safety and usability, providing a application to know consuming calories.

• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.127-138
• /
• 2000

This study was conducted to examine the differences between dynamic and static elastic constants by use of some laboratory tests of cement mortar specimens which have different water/cement mixing ratios. Specific gravity measurement, ultrasonic velocity estimating and uniaxial compression test were adopted to acquire the dynamic and static elastic constants. Digital data acquisition and processing enhanced the accuracy of estimating the velocities of specimens drastically, Also, the method using the gradient of propagation delay time in according to increment of specimen length more enhanced the accuracy than the method using the only one specimen length over total propagation time. The correlation between density and the P and S wave velocity of specimens shows reliable positive relation and the correlation between density and the strength of uniaxial compression has the similar relationship. The dynamic Young's modulus $(E_D)$ is alway greater than the static Young's modulus $(E_S)$ and there is increasing tendency of the ratio $(E_D/E_S)$ according to the increase of density or strength of the specimens. On the other hand, there is no typical relationship between dynamic Poisson's ratio $({\nu}_D)$ and static Poisson's ratio $({\nu}_S)$ and just the ratio of ${\nu}_D/{\nu}_S$ ranges front 69 to 122 %.

• Journal of Advanced Navigation Technology
• /
• v.15 no.1
• /
• pp.25-31
• /
• 2011

Recently NMEA 2000 protocol is familiarized as a standard real time instrument network of SOLAS ship. This paper is studied to develop NMEA 2000 based two-dimensional ultrasonic anemometer which is core device for navigation as a sensor of wind speed and direction using ultrasonic including temperature and barometer. Developed system is connected to NMEA 2000 network which is composed of various kinds of merchandised NMEA 2000 device such as depth gauge, speed gauge, GPS device etc. to test connectivity with other NMEA 2000 device and functional test are carried out as weather station in comparison with other merchandised weather station which are developed advanced foreign company to ascertain usability as a weather station on board.

• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.78-85
• /
• 2005

Initial alignment and localization are important topics in inertial navigation systems, since misalignment and initial position error wholly propagate into the navigation systems and deteriorate the performance of the systems. This paper presents the error convergence characteristics of the hybrid navigation system for underwater vehicles initial position, which is based on an inertial measurement unit (IMU) accompanying a range sensor. This paper demonstrates the improvement on the navigational performance oj the hybrid system with the range information, especially focused on the convergence of the estimation of underwater vehicles initial position error. Simulations are performed with experimental data obtained from a rotating ann test with a fish model. The convergence speed and condition of the initial error removal for random initial position errors are examined with Monte Carlo simulation. In addition, numerical simulation is conducted with an AUV model in lawn-mowing survey mode to illustrate the error convergence of the hybrid navigation System for initial position error.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.4
• /
• pp.241-250
• /
• 1997

The velocity dispersion of surface acoustical wave(SAW) of Si layer/mesh Au/Si substrate was measured by the frequency analysis technique of backward radiation at liquid/solid interface. The difference of backward radiation patterns depending on used transducers (2, 5, 10MHz) confirmed that the backward radiation phenomenon was caused by the energy radiation from SAW generated in surface region. An ultrasonic goniometer was constructed to measure continuously the angular dependence of backscattered intensity. The angular dependences of backward radiation(5MHz) were measured for Ni layer/Al substrate specimens that were bonded by epoxy involving different content of Cu powder. It was known that the width and pattern of backward radiation had informations such as the velocity dispersion, bonding quality and structure of surface region.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.2
• /
• pp.5-15
• /
• 1995

An application of the cross correlation technique by adopting ultrasonic waves for water pipe flow measuring purpose is studied. It is a non-intrusive flow metering method by determining the time of the flight of the flow turbulent noise and its non-obstructing mechanism enables to reduce process energy loss due to the flowmeter obstruction. A digital signal processor for the purpose of the real time Fourier transform was employed for the fast time calculation of the flow velocity. The overall accuracy was found as about $1\%$ for flow velocities from 0.25 m/s up to 16 m/s and for the pipe inside diameters from 50mm to 248mm. The cross correlation technique can be used for the tap water utility including most common liquid flows.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.1
• /
• pp.24-33
• /
• 1994

The main applications of CFRP are sports, aerospace and general industrial uses including automobiles. As this application fields expands the opportunity of machining, but CFRP is difficult to cut because of delamination of the composites and the short tool life. In this paper, the machinability of multidirectional CFRP by means of ultrasonic vibration cutting, which has been verified experimentally investigated.The experimentally to be highly effective in view of cutting force and surface quality.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.4
• /
• pp.187-194
• /
• 2017

In this study, marble that consist mainly of calcite were used for applicability evaluation after treated with consolidant such as alkoxysilane series of 0.8T0.2E1G_3wt0.08% and 1T1G_7wt0.08%. The position and intensity of X-ray diffraction peaks are no change and increasing trend after treated with two consolidants. The results of scanning electron microscopic analysis, morphology of rope type and homogeneous surface of platy or leaflike form observed on the marble after treated with 0.8T0.2E1G_3wt0.08% and 1T1G_7wt0.08%, respectively. Brightness of surface after treated with consolidant are changing slightly dark. Shore hardness and ultrasonic velocity values show increasing after treated on the marble surface with two consolidants.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.5
• /
• pp.587-594
• /
• 2019

This study experimentally investigated the effects of high and low densities of vegetation patches on the flow characteristics in a stream-scale outdoor experimental channel with rooted willows. Stream-scale experiments on vegetated flows were carried out for an emergent condition of vegetation. Vegetation patches were arranged by alternate bar formation and the flows in vegetated and non-vegetated sections were compared. Three-dimensional flow structure was measured by ADV (Acoustic Doppler Velocimeter) and the vertical distributions of longitudinal velocity were mainly analyzed from the measurements at various points. Flow velocities show different patterns depending on the density of vegetation patches. The difference in flow velocity between in the vegetated and non-vegetated sections appear to large in the dense patches and the flow becomes complicated at the downstream edge of the patch. Despite the upstream flow disturbed by the first patch, the flows over the second patch show the similar pattern.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.306-311
• /
• 2000

This paper deals with the development of Laser Doppler Vibrometer (LDV) that can mea~ure the tlequency and amphlude of the ultrasonic vibralion. Hc-Ne laser (632.8 om) is used as a light source, and Michelson interferometer in winch frequency of the objective beam is shIfted by Bragg cell IS adopted The frequency modulated signal centered at 40 MHz flom the PIN diode IS amplified. down-col1vel1ed to 2.5 MHz, filtered and digiLized. The voltage output that is proportional to the velocity of the vibratwg surface is obtawed using digItal PLL. A microprocessor is used to extract the frequcncy aud amplitude of the vibratIOn from the voltage output. It is found that the developed LDV can measure up to 300 kHz vibratIOn and the mlillmUITI measurable amplitude is I nm at 300 kHz. We believe thatlhis LDV can be used to measure the vibratIOn of the heavy electric maclllnery and micro-size structures. tures.