• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.599-606
• /
• 2017

In this paper, the automatic control system of the stroller brake was designed and manufactured to reduce the safety accident of the stroller. The ultrasonic sensors are used to determine whether the handle of the driver's hand is touching or not, and the gyro sensor is designed to detect the current tilt of the baby carriage. If the next driver's hand is not recognized and the tilt exceeds a certain angle, the servo motor is activated and the hydraulic brake is operated to prevent the accident on the downhill road. Finally, in this paper, a smart phone-based application was developed to make the remote control of the brake possible.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.192-192
• /
• 2008

This paper represents a piezoelectric ultrasonic linear motor by traveling wave. The motor which is composed of two piezo ceramics, elastic body, and connecting tip is driven by the frictional force between the connecting tip and the linear motion guide. longitudinal and flexural vibrations are made by traveling wave which is generated when the ultrasonic electrical signals with 90 degree phase difference are applied to two ceramics. These vibrations contribute to elliptical motion by mixed mode between longitudinal and transverse mode. A linear movement can be easily obtained by using the elliptical motion. In this paper, the piezoelectric actuator has been intensively simulated by using ATILA to achieve an optimized elliptical motion of it. We could get the elliptical motion from actual experiment through the simulated result.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.60-66
• /
• 2016

This study used an ultrasound infrared thermography technique to detect issues in the motor core of typical power equipment. The current defect inspection method of the motor core is often incomplete (due to the limits of visual inspection) and thus the reliability of the motor core is reduced. Therefore, in this study, experiments were carried out to increase the reliability of the test by using an ultrasonic infrared thermal non-destructive inspection method to image the motor core. The ambient temperature of the experimental system was maintained at $25^{\circ}C$. Experiments were carried out to examine a damaged motor core and a defect-free motor core. Experimental results confirm the technique clearly detected defects in the motor core, thereby confirming the possibility of using this technique in the field.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.1
• /
• pp.111-118
• /
• 1999

Throughout this thesis, I describe the design, fabrication, and evaluation of the 3 DOF farce-reflecting haptic interface using USMs(ultrasonic motors). This haptic interface allows a htmlaIl "observer" to explore and interact with a virtual environrrent for the sense of touch. To effectively display the mechanical impedance of the htmlaIl hand we need a haptic device with specific characteristics, such as low inertia, alrmst zero friction and very high stiffness. USMs have attracted considerable attention as the actuator satisfied these conditions. An observer may grasp the end effector of revice and interact with surfaces and objects created within a virtual environment The revice provires force feedback, allowing users to "feel" objects within the environment. The device works very well, as users are able to detect the edge of the wall, the stiffness of the button and the puncture. TIle force-reflecting haptic interface could be suitable as a master for micro-surgery or as an interface to virtual reality training systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.64-71
• /
• 2006

In this paper, a uniform speed controller for an ultrasonic rotary motor is developed using the phase-difference method. The phase difference method uses traveling waves to drive the ultrasonic motor. The traveling waves are obtained by adding two standing waves that have a different phase to each other. A compact phase-difference driver system is designed and integrated by combining VCO(Voltage Controlled Oscillator) and phase shifter. Theoretically the relationship between the phase difference in time and the rotational speed of the ultrasonic motor is sine function, which is verified by experiments. Then a series of experiments under various loading conditions are conducted to characterize the motor's performance that is the relationship between the speed and torque. Proportional-integral control is adopted for the uniform speed control. The proportional control unit calculates the compensating phase-difference using the rotating speed which is measured by an encoder and fed back. Integral control is used to eliminate steady-state errors. Differential control for reducing overshoot is not used since the response of ultrasonic motor is prompt due to its low inertia and friction-driving characteristics. The developed controller demonstrates reasonable performance overcoming disturbing torque and the changes in material properties due to continuous usage.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.11
• /
• pp.1613-1622
• /
• 2010

In this paper, the ultraprecision positioning control of an ultrasonic linear motor in a high-vacuum environment is presented. The bolt-clamped Langivin type transducer (BLT) with the 3rd longitudinal; and 6th lateral vibration modes was developed, which was excited by using the Eigen resonance frequency for two vibration modes in order to generate stable and high power. In practical applications, however, even if a geometrical design has an Eigen frequency, discordance between both mode frequencies can be generated by the contact mechanism and because of manufacturing errors as well as environmental factors. Both mode frequencies were precisely matched by adjusting the impedence. By using this method, the BLT can be driven under any environmental conditions. The nominal characteristic trajectory following(NCTF) control method was adopted to control the positioning of the system in vacuum. The developed linear motor stage show high positioning accuracy with 5 nm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.11-14
• /
• 2012

본 논문에서는 임베디드 시스템 기반 NXT 로봇을 제어하여 길찾기, 미로찾기, 장애물오르기 등의 주행을 수행하는 프로그램을 개발하는 것이다. 미로 찾기는 RBG 센서를 통해 트랙의 색을 구분하여 정해진 색을 따라 주행하는 하는 것이며, 장애물 미로구간에서는 NXT 로봇 자신이 장애물을 넘지 못한다는 것을 인식하여 미로를 찾아 빠져나가도록 초음파 센서를 이용한다. 초음파 센서로 자신이 통과할 수 있는 진입로로 판단되면 주행을 계속하며, 그렇지 않은 경우에는 좌우회전을 통해 미로구간을 통과한다. 마지막 계단식 장애물 구간에서는 접촉센서와 초음파 센서를 통해서 물체의 높이를 가늠하여, 접촉센서 값과 초음파 센서 값을 통해 프로그램은 통과 여부와 계단높이를 판단한다. 실험결과 로봇은 제어프로그램 시나리오에 따라 적절하게 수행함을 확인할 수 있었으며, 이와 같은 로봇 제어를 확대하면 사람을 대신하는 재난구조 활동, 전쟁시 지뢰탐지 및 적 정찰활동, 지하공동구 및 지하매설물 안전 점검활동 등을 수행하는 업무로 적용이 가능할 것으로 판단된다. 본 연구에서 사용한 로봇은 I-Brick이라는 마이크로프로세서를 통해 프로그램을 구동되며, 저 전력으로 I-Brick과 그와 연결된 센서와 서브 모터 등을 구동하고 제어하도록 설계하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.997-999
• /
• 2022

아기의 심장 박동 소리를 듣지 못하는 청각 장애 부모를 위한 태아 초음파 심장박동 촉각 변환 시스템을 개발하고자 하였다. 본 시스템은 아기의 심장박동 소리를 USB 마이크를 이용하여 소릿값을 입력받아 이에 대응하는 값을 진동 모터의 진동 출력 세기와 LED 밝기의 세기로 출력시키도록 하였다. 아기의 심장박동 느낌을 진동으로 표현해 내기 위해 진동의 샘플링 주기를 구체적인 수치로 조절하였고 산모에 따라 진동의 세기와 주변 잡음 제거를 할 수 있도록 조절하는 가변저항 2개를 연결하였다. 그 결과 태아 초음파 심장박동 촉각 변환 시스템을 성공적으로 개발하였으며 장치 체험자들로부터 총 평균 4.63점으로 높은 만족도를 얻었다. 개발 제품은 청각장애 산모들의 모성애를 충족시키고 아기의 심장박동을 느낌으로써 아기의 존재를 느낄 수 있을 것이며, 산부인과의 초음파 영상진단의 확장 신기술로 활용할 수 있을 것으로 기대된다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.733-735
• /
• 2017

자연재해나 전쟁 등으로 인한 긴급 구호 상황에서의 환자에 대한 응급처치는 중요하다. 그러나 자연재해나 전쟁으로 인해 지면이 불균형해지면 응급 처치를 하기가 불편해진다. Absolute Table은 테이블, 자이로 센서, 가속도 센서, 초음파 센서, 스텝 모터, 모터 드라이버, 스크류와 너트, 각종 스위치들로 구성되어있다. Absolute Table의 전원을 키면 실시간으로 수평을 맞추고 유지해 평평한 작업대를 형성한다. 어떤 형태든 적용이 가능해 실시간 수평 유지 기술이 필요한 다양한 분야와 접목시킬 수 있을 것으로 예상된다.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.766-771
• /
• 2002

In this study, we have developed a 3-dimensional diagnostic ultrasonic sector probe using a convex type ultrasonic probe with 128 active elements. The probe was made to operate at the center frequency of 4.5㎒ with the bandwidth of 66%. The driving part was designed to rotate the axis of the convex probe by means of a step motor equipped with reduction gears and spur gears attached to the motor so that the probe could enable us to acquire a series of 2-dimensional images to construct a 3-dimensional image. Acoustic cover of the probe was made of polymers to have the same radius of rotation as that of the convex probe. The controllability of the rotation angle and the structural stability of the probe were confirmed through experimental 3-dimensional images obtained using the developed 3-dimensional sector probe.