• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.130-136
• /
• 2005

The nondestructive evaluation system consisted of a ball indentation tester and a ultrasonic tester was developed to evaluate material properties. The relations between the parameters from test results using the system and the results of tensile and fracture toughness tests were investigated. The fracture toughness and tensile properties could be determined using the system. Some metallic materials were experimented to predict the fracture toughness and tensile properties and verify the relations between them. The predicted fracture toughness and tensile properties show a good agreement with the results obtained by conventional tests. It is found that the material properties and the material degradation can be evaluated using the nondestructive evaluation system.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.463-469
• /
• 2003

과실은 재배기술, 재배환경의 영향으로 형상, 색택, 병충해로 인한 상해 정도가 다르게 나타나기 때문에 상품성이 매우 다양하게 결정된다. 또한 수확, 저장, 포장, 수송, 상하차 등 유통과정에서 기계적 손상이 발생할 수 있으며 유통기간이 길어짐에 따라 호흡 및 증산작용 등과 같은 생리적 작용으로 인하여 부패 및 변질이 발생하며 이러한 유통과정 중에서 발생하는 과실의 품질저하가 상당한 수준에 이르고 있으나, 이에 대한 관심은 매우 낮은 실정이다. 또한, 대부분의 청과물은 수확 후 소비되기까지 장기간의 저장으로 품질 변화가 발생할 수도 있다. (중략)

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.691-694
• /
• 2009

전세계적으로 운전자의 주행시 차선변경이나 정지시 돌발적으로 지나가는 옆차선의 차량을 감시함으로서 교통사고발생율을 대폭 감소시킬 수 있기 때문에 많은 시스템들이 개발되고 있다. 그러나 대부분 비젼시스템과 연결되는 고정형 타입으로서 운전자의 시각을 지원해 주는 경우가 많았다. 본 연구에서는 회전형으로 제작되어 사용자가 원하는 대로 감시영역을 축소시키거나 확대시킬 수 있는 방식으로서 사각지대 감지를 위한 서보모터의 회전속도/각도와 초음파센서의 측정거리 및 LED의 ON-OFF 등 각종 파라미터를 조절함으로서 최적의 사양을 선정하였고 시험을 통해 그 타당성을 증명하였다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1916-1924
• /
• 1990

In this paper attenuation effect on the measurement and the tomography of nonlinear parameter is discussed. We perform computer simulation with the method using harmonic components and the method using secondary wave components, and then estimate attenuation effect through the results and compare two measurement techniques. According to simulation result the attenuation effect is more intensive as large n and \ulcorner, and the degree of the attenuation effect is represented as error functions. In the aspect of measuremnet techniques, the method using secondary wave components is more insensitive to attenuation effect than the method using harmonic compnents. We obtain the same result in the nonlinear tomography, and show that the attenuation compensive filter is required because the whole tomogram is affected by frequency dependent attenuation(or nonlinear attenuation)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.296-297
• /
• 2008

층상실리케이트 나노입자가 충진된 에폭시수지를 분산정도 향상을 위해 즉, 층상실리케이트 층간간경의 삽입과 박를 향상시키기 위해 분산제를 첨가하였고, 초음파 적용으로 분산시켰다. 그 결과 분산제 종류에따라 분산정도인 X-RD 특성이 서로다른 결과를 얻었다. 절연성능을 평가하기위해 단시간 절연파괴강도와 장시간 절연파괴특성인 트리시스템을 이용하여 절연파괴시간 및 측정하였다. 이와같은 결과에대한 통계적인 분석으로 Weibull plots를 이용하였고 그 결과 분산제가 첨가된 나노콤포지트의 기울기 파라미터인 $\beta$값의 결과로부터 나노콤포지트 우수성을 확인 할수있었다.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.89-92
• /
• 2006

In this study, the pressure vessel piping with corrosion used during long term were investigated from the time-frequency analysis method. The damage of piping could be evaluated the attenuation factor by ultrasonic parameters such as center frequency and echo waveform. Based on NDE analysis by time-frequency analysis method, it should also be possible to evaluate from various damages and defects in piping members.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.277-280
• /
• 2002

In this paper, it is fundamental purpose that finding the relationship between quality and structure of bone, by reconstructing the bone structure image, using ultrasound. In this study, longitudinal transmission method was used for experiment as basic measuring method, which is known as ultrasonic diagnosis method for human tibia. And using ultrasonic velocity parameter that can be detected and calculated with the transmitted signal, new estimated parameter, called Bone Area Fraction, is applied to reconstruct image. Through the in-vitro experiment in cattle's tibia bone, basic sectional image of bone which is similar in real bone structure image can be reconstructed.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.382-387
• /
• 2002

생활 패턴의 변화와 소득수준이 향상됨에 따라 과실류에 대한 소비자의 기호 성향은 고급화 및 신선도를 추구하는 경향이 증가하고 있으며 따라서 과실의 비파괴 품질판정기술의 개발이 요구되고 있다. 과실에 대한 여러 외부품질 인자중 과실의 경도는 일차적으로 기계적 특성으로 이해되어 가공기계의 설계 시 이송장치 등과 같이 과실과 직접 접촉하는 부분들에 대한 세부적인 설계에 필요한 기초 물성일 뿐만 아니라 포장재 등을 설계하는 필요한 중요한 인자로 사용되고 있다. 또한 경도는 저장 및 유통과정 중에 발생하는 부패 등에도 관련하여 이미 외국에서는 많은 연구가 진행 중에 있으며 특히 숙도 등과 같은 품질변화와 관계가 있는 것으로 보고되고 있을 뿐만 아니라 소비자의 구매행위시 가장 중요시하는 선택 기준 중의 하나이며 과실의 장기 저장성을 결정하는 주요한 품질 인자라고 할 수 있다. (중략)

• Journal of the Korean Society for Heat Treatment
• /
• v.35 no.5
• /
• pp.239-245
• /
• 2022

The purpose of this study is to evaluate the degree of microstructural change of materials using ultrasonic nonlinear parameters. For microstructure change, isothermal heat-treated ferritic 2.25Cr steel and low-cycle fatigue-damage copper alloy were prepared. The variation in ultrasonic nonlinearity was analyzed and evaluated through changes in hardness, ductile-brittle transition temperature, electron microscopy, and X-ray diffraction tests. Ultrasonic nonlinearity of 2.25Cr steel increased rapidly during the first 1,000 hours of deterioration and then gradually increased thereafter. The variation in non-linear parameters was shown to be coarsening of carbides and an increase in the volume fraction of stable M6C carbides during heat treatment. Due to the low-cycle fatigue deformation of oxygen-free copper, the dislocation that causes lattice deformation developed in the material, distorting the propagating ultrasonic waves, and causing an increase in the ultrasonic nonlinear parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4B
• /
• pp.357-363
• /
• 2009

When yields the mean velocity of the closed conduit which is used generally, it is available to use Darcy Weisbach Friction Loss Head equation. But, it is inconvenient very because Friction Loss coefficient f is the function of Reynolds Number and Relative roughness (${\varepsilon}$/d). So, it is demanded more convenient equation to estimate. In order to prove the reliability and an accuracy of Chiu's velocity equation from the research which sees hereupon, proved agreement very well about measured velocity measurement data by using Laser velocimeter which is a non-insertion velocity measuring equipment from the closed conduit (Laser Doppler Velocimeter: LDV) and an insertion velocity measuring equipment and the Pitot tube which is a supersonic flow meter (Transit-Time Flowmeters). By proving theoretical linear-relation between maximum velocity and mean velocity in laboratory flume without increase and decrease of discharge, the equilibrium state of velocity in the closed conduit which reachs to equilibrium state corresponding to entropy parameter M value has a trend maintaining consistently this state. If entropy M value which is representing one section is determinated, mean velocity can be gotten only by measuring the velocity in the point appearing the maximum velocity. So, it has been proved to estimate simply discharge and it indicates that this method can be a theoretical way, which is the most important in the future, when designing, managing and operating the closed conduit.