• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.781-786
• /
• 2010

In this study, a new concept of ocean transport system, called the mobile harbor serving for a short distance transport of containers with cargo handling cranes between mother containerships and coastal ports, is introduced. Instead of direct berthing a very large containership at the coastal port, Mobile Harbor is moving to the offshore mooring basin with enough water depth condition. Therefore, investigation of the coastal environment, technical condition and limitation of the domestic trade ports for the application of Mobile Harbor, is essential process. To figure out the accessibility of mobile harbor, the environmental conditions, the cargo handling capacity and marine traffic volume and flow pattern has been analyzed with the tools for marine traffic simulation and virtual navigation aids system. The most proper Mobile Harbor mooring areas among trade ports of the south and east coast are selected by analyzing the obtained information and evaluating its application: (1) Under natural environmental conditions such as air and sea weather, three candidate areas are selected such as Masan port, Ulsan port, and Busan(New port) port. (2) Under marine traffic and appropriateness of water facilities, three candidate areas are selected as Mokpo port, Busan(New port) port, and Donghae & Mookho port (3) For a region-based analysis considering handling capacity and the local managed trade ports in vicinity, three candidate areas are selected as Busan region, Yosu & KwangYang region, and Mokpo region. Through this study, the basic guideline for selection of optimum trade port and offshore mooring basin for mothership and Mobile Harbor is recommended. In order to apply the Mobile Harbor to the real water, navigaton aids as the virtual route identification with AIS must be introduced for maritime safety in the vicinity of Mobile Harbor area which berthing and cargo handling is being conducted.

• Journal of the Society of Naval Architects of Korea
• /
• v.43 no.5 s.149
• /
• pp.568-577
• /
• 2006

With the increase of ship size and speed, the loading on the propeller is increasing, which in turn increases the rotational speed in the propeller slipstream. The rudder placed in the propeller slip stream is therefore subject to severe cavitation with the increased angle of attack due to the increased rotational induction speed of the propeller. In the present paper the surface panel method, which has been proved useful in predicting the sheet cavitation on the propeller blade, is applied to solve the cavity boundary value problem on the rudder. The problem is then solved numerically by discretizing the rudder and cavity surface elements of the quadrilateral panels with constant strengths of sources and dipoles. The strengths of the singularities are determined satisfying the boundary conditions on the rudder and cavity surfaces. The extent of the cavity, which is unknown a priori, is determined by iterative procedure. Series of numerical experiments are performed increasing the degree of complexity of the rudder geometry and oncoming flows from the simple hydrofoil case to the real rudder in the circumferentially averaged propeller slipstream. Numerical results are presented with experimental results.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.69-69
• /
• 2010

최근 컨테이너 선박의 초대형화로 극후물 고장력 강재인 항복응력 460MPa급 고장력강인 EH47이 개발되었다. 두께 80mm의 극후물 용접에서 용접생산성 향상을 위하여 EGW/FCAW로 양면 용접이 검토되고, 입열량은 최대 300kJ/cm의 대입열 용접이 요구된다. 이를 위해서는 강재 및 용접재료 모두 300kJ/cm 용접부 성능이 선급 규격을 만족하여야 함은 물론 마지막 조립단계에서 적용되기 때문에 용접재료의 용접작업성도 매우 크게 요구되고 있다. 먼저 대입열 용접금속에서 요구되는 저온 충격인성($vE_{-20^{\circ}C}{\geq}57J$)을 만족하기 위하여는 용접금속의 미세조직 제어가 필요하며, 특히 조대한 입계페라이트 생성을 억제하고 미세한 입내 페라이트를 균일 분포하는 것이 중요하지만, 이를 위해 용접금속의 소입성이 지나치게 높이면 경화조직인 베이나이트 분율이 증가하여 오히려 용접금속 저온 충격인성을 저하시키므로, 적절한 용접금속의 성분 제어가 중요하다. 한편 용접부는 선급에서 요구하는 최소 강도인 570MPa를 만족하기 위하여 용접금속의 소성구속 현상을 활용하여 용접부 인장강도를 확보 할 수 있음을 확인했다. 이를 위해서는 용접금속의 적정한 경화도 확보가 필요하였다. 전술한 바와 같이 대입열 용접금속 저온 충격인성 확보와 용접부 강도 측면을 고려하여 용접금속 최적의 탄소당량 범위를 제시코자 하였다. 한편 용접재료의 용접작업성은 EGW용접의 용적이행 현상은 자유비행이행으로 이루어지고 있으며 특성상 용접중 용적과 용융지 사이에 많은 순간단락 현상을 동반하고 있으며, 슬래그 유동이 불안정하면 아크 꺼짐 현상도 관찰되고 있다. 따라서, 현장용접시 원할한 용접작업성을 확보할 수 있는 평가 기준으로써 아크 전류 및 전압의 변동 정도를 설정하고, 용접재료의 용접작업성 확보 기준을 제시코자 하였다.

• Journal of Korea Port Economic Association
• /
• v.37 no.3
• /
• pp.19-34
• /
• 2021

Yeosu Gwangyang Port, along with Busan Port, Incheon Port, Ulsan Port, and Pyeongtaek Dangjin Port, serves as Korea's top five ports for trade on the southern coast. It is the second largest port in Korea after Busan Port, and the largest port in terms of import and export volume. Yeosu Chemical Industrial Complex, the world's largest chemical industrial complex, has continued to grow rapidly, but recently, the increase in volume has been decreasing. Therefore, this study sought to find major development strategies for the development of Yeosu Gwangyang Port and to derive the priorities of the strategies. To this end, the development strategy of Yeosu Gwangyang Port was divided into three major categories: operation revitalization, infrastructure construction, and policy support using the AHP analysis technique and analyzed again in two aspects: short, medium, and long term. As a result of the analysis, 'integrated operation of container docks and strengthening competitiveness' were considered the most important in short- and medium-term policies. It is believed that it will be necessary to integrate container operators, establish routes in preparation for entry of super-large ships, and install large cranes. In the long-term policy, the most important thing was to foster high value-added industries based on local industries. It is believed that strategies are needed to attract companies from outside regions through the settlement support system. The results of this study are expected to be used to establish development strategies for Yeosu Gwangyang Port and to establish investment priorities.

• Journal of Korea Port Economic Association
• /
• v.29 no.2
• /
• pp.39-61
• /
• 2013

China, a leader of regional economies in North-East Asia, helps to integrate a single shipping market and affects diversely main ports in the region through affecting the flows of container transshipment, strategies of shipping companies for port calling and shipping networks. This study examines competition and cooperation among the hub ports in the region through studying examples of the three Chinese hub ports -Hong Kong, Shanghai, and Tianjin- and concludes some implications of status change of hub ports in the region after scrutinising development process of the Chinese main hub ports and the historic interaction of port development among these ports. The characteristics of growth pattern of three ports are as follows. The port of Hong Kong constructs step by step the container facilities in accordance with demand growth and prefers stabilisation of operation and management through scale enlargement of port facilities. Even though demand grows continually, the port of Shanghai continued its defensive attitude towards facility expansion till the 1990s and has tried to get economies of scale in enlargement of port facilities. The port of Tianjin, similarly as the two other ports, expands serially its facilities and utilizes the capacity concentration and functional specialisation of facilities. The analysis of panel data and panel regression of three hub ports implicates that each port has its own specific demand and shows that the interaction of container handling among three ports was weak in 1980s and has become stricter and stronger since 1990.

• Journal of Korea Port Economic Association
• /
• v.36 no.1
• /
• pp.129-140
• /
• 2020

In the future, the global container handling market will be reorganized into larger ships and shipping alliances, and the bargaining power of shipping companies will be further strengthened. Therefore, the global terminal operator (GTO), which has a global network, vast experience, and operational know-how, is expected to strengthen its competitiveness. In Korea, the central government promoted the development of GTOs in the mid-2000s, but it failed, mainly due to disagreements between port stakeholders. In this study, the macroeconomic indicators that have the same effect in all regions were used to analyze GTO management performance. In the short term, it could be used to establish the business strategy of domestic terminal operators based on changes in macroeconomic indicators. In the long term, it would be used to establish a promotion strategy for GTOs in Korea. The results of analyzing the impact of macroeconomic indicators on the GTO's profit show that the GTO's profit is significantly affected by cargo handling capacity, the consumer price index of the United States, the Shanghai Composite Index, the Crude Oil Price, and the London Inter-bank Offered Rate (LIBOR). However, the scale of impact was not significantly different between public and private GTOs.

• Journal of Korea Port Economic Association
• /
• v.27 no.2
• /
• pp.313-331
• /
• 2011

Due to have been more keen in East-North Asia Hub Port competition, to be accelerated Busan New Port development, and to result to supply excess position, Busan port has been confronted by many problems. Also, as facilities of North Port is old, it is impossible to secure 16m depth of water at North Port, and North Port redevelopment is being, container traffic of North Port is accelerated to shift at New Port. Therefore, it. is time to seek for connection growth plan of succeeding together-Busan North & New Port as soon as possible. Connection growth plan of succeeding together-Busan North & New Port is focused, as follows. First, it is required to set up model for connection growth plan of succeeding together-Busan North & New Port. It is valid to specialize for ULCC, to promote to global port at New Port, and it is effective to focus on feeder service and general cargo handling, and to include most space to North Port redevelopment. Second, through port function reorganization, it is required to create a synergy by port function clustering. Third, through effective connection traffic network expansion for moving T/S cargo effectively, it is required to develop Busan Port for T/S cargo-focused port. Fourth, it is required to develop port hinterland logistics zone for creating container traffic through connection development of New Port-BJFEZ. Finally, it is required to build SCM system for creating container traffic among shipper, carrier, freight forwarder and related institution.