• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.19-25
• /
• 2001

Structural design requirements for very large floating structures(VLFS) are different corresponding to this purpose and structural type. In this study, the structural design procedure of VLFS is described, composing of the following processes : construction of design conditions. choice of structural types and main materials, estimation of structural design loads, determination of structural arrangements, and scantling of structural members. As an example of practical application, the initial structural design of floating airport and container terminal for Pusan is demonstrated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.51-56
• /
• 2006

부유식 해상공항과 같은 초대형 부체 구조물(VLFS)의 연안역 설치 후 발생할 수 있는 배후의 해빈변형을 예측하기 위한 토대를 마련하기 위한 기초 연구를 수행하였다. 이를 위해 일정 사면을 가진 천해역에서의 실험 결과를 통하여 비교적 수심이 깊은 곳에 설치된 매립식 구조물 배후에서의 파랑 및 해빈류를 개관하였으며, 매립식 및 부유식 해상 구조물 설치 시 주변 해역의 파랑 및 해빈류장을 계산하였다. 파랑장에 있어서 라프라스 방정식 토대로 유한요소법을 도입한 3차원 파랑 변형 계산을 수행함으로써 매립식 및 부유식 구조물 모두에 대해 적용 가능하였으며, 해상 구조물의 설치 형식이 매립식 및 부유식 경우에 대해 파랑, 해빈류 분포의 변화를 관찰할 수 있었다.

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.2
• /
• pp.26-32
• /
• 2001

In this paper, elastic responses of a floating structure in waves with a breakwater are presented. The method of source-dipole distribution is used to analyze the velocity potentials for the fluid region. The deflections of structure are expanded approximately in terms of natural mode functions of free-free beam. The model for present calculation is a floating plate with an length of 1000m and the hydroelastic responses for a floating structure with a straight breakwater are shown. The effects of distance between breakwater and structure, bending rigidity and relative length of regular waves are examined.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.10a
• /
• pp.45-49
• /
• 2001

The length and the breadth or a very large floating airport are determined by airplane types and airport facilities. However, the depth affect not only the structural strength but also the functional requirement such as a possibility of taking off and landing. The optimization problem for determining the depth is to select a design so that the cost is minimized. In this paper, a general arrangement and a method to decide the depth are proposed. Strength, functional requirement, and possibility of occurrence of deck wetness and slamming are considered in order to determine the depth of structure. Hydrodynamic forces of the diffraction and radiatin problems are predicted by applying the source-dipole distribution method, and the structural responses are obtained by the finite element method.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.10-16
• /
• 1996

The vibration due to progressive ocean waves is analyzed for a typical footing-type offshore airport platform. The platform is modelled as a spring-supported Euler beam and buoyancy change due to wave is considered as excitation force, under the assumption that the wave propagates without distortion by the structure. The results show that the natural frequencies of this structure are distributed very closely and are little affected by boundary conditions and that the response charateristics due to ocean waves are quite different according to the wave frequency. In this study, the wave frequencies are divided into three regions; the resonance region at which the response is governed by the resonance between the natural mode at the wave frequency and the corresponding modal component of the wave excitation force, the bending governed region at which the response is governed by the bending stiffness, and the spring (buoyancy) governed region at which the response is governed by the spring constant ahd therefore is same as the incident wave form.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.4
• /
• pp.64-76
• /
• 1999

In this paper hydroelastic experimental techniques of very large floating offshore structures are suggested based on the model test carried out in the UOU Ocean Engineering Wide Tank. The prototype is a box-shaped floating structure with length of 300m, breadth of 60m, depth of 2m and draft of 0.5m and longitudinal bending rigidity as $4.87{\times}10^{10}kgm^2$. The scale ratio is 1/42.857. The model is realized by aluminum square pipes with the section dimension of $20mm{\times}20mm$. The numbers of longitudinal and transverse pipes are 7 and 35 respectively. Heave motions at selected points are measured with potentiometers and bending moments with strain gages.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.57-62
• /
• 2000

The very large flcating structure which am be used for as airport may be as large as several kilomet wide. The first order wave forces as well as wave drift forces are very important forces on such a very large floating In the present studv, the time simulation of motion responses with dolphin-moored VLFS in waves is presented The coeffcients and wave forces involved in the equations are obtained from a three-dimensionul panel method in the frequc The horizontal drift forces and mooring forces for dolphin systems are taken into account. As for numerical example, analyses are carried out for a VLFS in irregular wave condition