• Title/Summary/Keyword: 초기 투자율

Search Result 64, Processing Time 0.023 seconds

Complex Permeability Analysis of NiCuZn Ferrites (NiCuZn 계 페라이트의 조성에 따른 복소투자율 변화 해석)

  • 남중희;오재희
    • Journal of the Korean Magnetics Society
    • /
    • v.6 no.6
    • /
    • pp.382-387
    • /
    • 1996
  • The characteristics of the complex permeability of ${(Ni_{x}Cu_{0.2}Zn_{0.8-x}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$ with various Ni and $Co_{3}O_{4}$ contents were investigated in this work. It is found that the NiCuZn ferrites with $x{\geq}0.6$ have a relatively small peak width of the imaginary part of permeability $\mu$". The resonance frequency is increased as Ni content becomes higher, where the loss is low. The $\mu$" value decreases with increasing FezO, deficiency, but the resonance frequency($f_{\mu"max}$) is only slightly affected by $Fe_{2}O_{3}$ deficiency. In case of $Co_{3}O_{4}$ addition to the NiCuZn ferrites, the $f_{\mu"max}$ increases since the initial permeability decreases with the amount of $Co_{3}O_{4}$. It is concluded that the Ni content in the NiCuZn ferrite is a dominant factor for the total loss of these spinel ferrites.

  • PDF

Microwave Absorbing Properties of Iron Particles-Rubber Composites in Mobile Telecommunication Frequency Band (이동통신주파수 대역에서 순철 분말-고무 복합체 Sheet의 전파흡수특성)

  • Kim, Sun-Tae;Kim, Sant-Keun;Kim, Sung-Soo;Yoon, Yeo-Choon;Lee, Kyung-Sub;Choi, Kwang-Bo
    • Journal of the Korean Magnetics Society
    • /
    • v.14 no.4
    • /
    • pp.131-137
    • /
    • 2004
  • For the aim of thin electromagnetic wave absorbers used in mobile telecommunication frequency band (0.8-2.0㎓), we investigate high-frequency magnetic, dielectric and microwave absorbing properties of iron particles dispersed in rubber matrix in this study. The major experimental variables are particle shape (sphere and flake) and initial particle size (in the range 5-70 $\mu\textrm{m}$) of iron powders. High value of magnetic permeability and dielectric permittivity can be obtained in the composites containing thin plate-shape (flake) iron particles (of which thickness is less than skin depth in ㎓frequency), which can be produced by mechanical forging of spherical iron powders using an attrition mill. This result is attributed to the reduction of eddy current loss (increase of permeability) and the increase of space charge polarization (increase of permeability). The optimum initial particle size is found to be about 10 $\mu\textrm{m}$ for the attainment of the material parameters (particularly, real part of complex permeability) satisfying the wave impedance matching. With the iron powders controlled in size and shape as absorbent fillers in rubber matrix, the thickness can be reduced to about 0.7mm with respect to -5㏈ reflection loss (70% power absorption) in mobile telecommunication frequency band.

The Effect of $Tio_2$ Addition on the Magnetic Properties of Mn-Zn Ferrites ($Tio_2$첨가가 Mn-Zn Ferrites의 자기적 특성에 미치는 영향)

  • 박종원;한영호
    • Journal of the Korean Magnetics Society
    • /
    • v.9 no.6
    • /
    • pp.278-284
    • /
    • 1999
  • The effect of TiO$_2$addition has been studied on the power loss, density, initial permeability, resistivity, and microstructure of Mn-Zn ferrites. TiO$_2$addition increased the density of sintered body and decreased of the initial permeability. Activation energy for electron hopping as well as electrical resistivity increased with TiO$_2$addition. The toroidal core sintered at 1150 $^{\circ}C$ with 1.5 wt% of TiO$_2$demonstrated the power loss of 83 mW/㎤ at 1 MHz, 25 mT, 8$0^{\circ}C$. However, the same specimen sintered at 120$0^{\circ}C$ lead to the power loss, 1168 mW/㎤ at 1 MHz, 25 mT, 8$0^{\circ}C$ and developed an exaggerated grain growth.

  • PDF

A Study on the Economical Installation Method of Fiber Optical Subscriber Network (광 가입자망의 구축 방식별 경제성 연구)

  • Yoo, Kang-Hee;Park, Jong-Soo
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.12 no.9
    • /
    • pp.1666-1674
    • /
    • 2008
  • In this paper, various forms of technical methods as well as comparison analysis on constructing optical subscriber network were studied to find the most economical installation method in the future. Comparison analysis has been focused on the three popular types of optical subscriber networks in Korea, such as VDSL2, Ethernet-LAN and FTTH-R. A study is conducted on the initial installation investment per subscriber, equipment failure rate as well as power consumption per subscriber. As a results, FTTH-R network will be the most economical method in the future, but a gradual switch which undergoes a UTP-fiber hybrid method as the midway process is preferable in considering the existing installed copper UTP subscriber cables.

Characterization of the High-temperature Isothermal Aging in USC Ferritic Steel Using Reversible Permeability (가역투자율을 이용한 초초임계압 페라이트기 강의 고온 등온열화 평가)

  • Kim, Chung-Seok;Ryu, Kwon-Sang;Nahm, Seung-Hoon;Lee, Seung-Seok;Park, Ik-Keun
    • Journal of the Korean Magnetics Society
    • /
    • v.19 no.3
    • /
    • pp.100-105
    • /
    • 2009
  • The high-temperature isothermal aging is studied in ultra-supercritical steel, which is attractive to the next generation of power plants. The effects of microstructure on reversible permeability are discussed. Isothermal aging was observed to coarsen the tempered carbide ($Cr_{23}C_6$), generate the intermetallic ($Fe_2W$) phase and grow rapidly during aging. The dislocation density also decreases steeply within lath interior. The dynamic coercivity, measured from the peak position of the reversible permeability profile decreased drastically during the initial 500 h aging period, and was thereafter observed to decrease only slightly. The variation in dynamic coercivity is closely related to the decrease in the number of pinning sites, such as dislocations, fine precipitates and the martensite lath.

The Prodessing Control of NiCuZn Ferrite(II) - The Relationship between Initial Permeability and Bulk Density of NiCuZn Ferrite as Functions of Forming Pressure and Sintering Temperature. (NiCuZn Ferrite의 제조공정 제어(제2보) - 성형압력 및 소성온도 변화에 따른 초기투자율과 겉보기밀도에 관한 고찰)

  • 류병환;김선희;최경숙;고재천
    • Journal of the Korean Magnetics Society
    • /
    • v.5 no.6
    • /
    • pp.937-946
    • /
    • 1995
  • In this research, the processing control of NiCuZn Ferrite has been developed. The relationship between initial permeability and bulk density of NiCuZn Ferrite with processing factors was studied. NiCuZn Ferrite, which calcinated at $700^{\circ}C$ for 3 hours, was ball milled for about 60 hours to make a size of $0.5\mu\textrm{m}$ followed by granulation using spray dryer. The physical properties and the magnetic properties of NiCuZn Ferrite were investigated with the processing factor, such as (i) granule size and forming pressure, and (ii) sintering temperature. The green density of NiCuZn Ferrite was largely depended on the forming pressure rather than its granule size. The green density of NiCuZn Ferrite was increased from $2.484\;g/cm^{3}$ to $3.002\;g/cm^{3}$ with increase in forming pressure. The bulk density of NiCuZn Ferrite was increased from $3.470\;g/cm^{3}$ to $4.754\;g/cm^{3}$ linearly with increase in sintering temperature. The relationship between initial permeability and bulk density of NiCuZn Ferrite was expressed with the empirical equation,$\mu_{i}=a+b_{\rho}+c_{\rho}^2$ at forming pressure and sintering temperature.

  • PDF

An Empirical Study on the Equity Investment of Venture Capitalists on the IPOs Performance (벤처캐피탈회사의 지분투자와 벤처기업 최초공모주 성과 분석)

  • Kim, Seok-Yong;Park, Tae-Jin
    • Asia-Pacific Journal of Business Venturing and Entrepreneurship
    • /
    • v.1 no.1
    • /
    • pp.179-199
    • /
    • 2006
  • The objective of the study which it analyzes the result which goes made to the equity investor venture company IPOs stock of Korean venture capitalists. The sample company is the venture business 101 which IPO time venture capitalists invest in period KOSDAQ market from 1997 July 1st to 2006 June 30th for 9 years. The result of the study was as follows. First, it is found that syndication investing venture capitalists than the sale investing venture capitalists has desirable investment act which relax non-symmetry information between the publicly held company and the investor. The study support to Bygrave(1987), Lerner(1994) and so on. Second, The venture capitalists under postscript investing the venture business compared to under investing shows IPO excess benefit rate initially more highly from the venture business and the investor whom already invests early stage prove to use the manned it exaggerates the value of the venture business which venture capitalists oneself invests from postscript phase through the high position characteristic At last, it is discovered that the investment equity ratio of venture capitalists effect of sound (-) postscript investor IPO result which analyzed. It is showed that venture capitalists will remain more lowly excess benefit rate as the equity ratio which the venture capitalists invests at the venture business will be high.

  • PDF

Feasibility Study of small hydropower at a municipal wastewater treatment plant by model analysis (모델분석을 통한 하수처리장 소수력발전 경제성 평가)

  • Kim, Won-Kyoung;Kim, Dong-Soo;Kang, Ji-Hoon;Chae, Kyu-Jung;Kim, Jung-Yeon;Lee, Chul-Hyung;Park, Wan-Soon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.216-220
    • /
    • 2012
  • 본 연구는 경기도 용인시에 위치한 공공하수처리장을 대상으로 소수력발전 성능특성을 예측하고 경제성을 분석하여 소수력발전소의 건설타당성을 제시하였다. 방류구에서의 수준측량 조사에 따르면 실제 유효 낙차는 4.3m로 나타났다. 최근 5년간 방류량 자료를 살펴보면 일평균 실제 처리량은 약 $30,000m^3/day$로 나타났으며, 우수 유입과 물 사용량이 증가하는 여름 및 가을에 처리량이 증가하였다. 설계유량은 유량변화에 따른 누적 확률밀도와 유량지속곡선에 근거해 산정하였으며, 시간빈도로 보았을 때 17%의 유량이 지속되는 $0.35m^3/sec$가 설계유량으로 나타났다. 예상되는 수차 발전용량은 11kW급이며, 시스템 가동율은 74%, 그리고 계통선에 송출될 수 있는 연 전력생산량은 71.3MWh로 나타났다. 경제성 평가는 신재생에너지 경제성 분석 도구인 RETScreen 프로그램을 사용하여 B/C ratio, IRR, 개발투자비 등의 경제성 평가지표들을 산정하였다. 편익(Benefit) 산정시 전력기준단가는 133.67원/kWh, 할인율 7%를 적용하였으며, 비용(Cost) 산정시 유지관리비는 초기 건설비의 1%, 사용연한 30년을 적용하였다. 경제성 분석결과 기흥레스피아의 소수력발전소 건설시 초기 건설공사비가 $165,000 일 때, B/C 1.0, NPV $3,534, 투자회수기간 15.1년으로 산정되었고 따라서 초기 건설비용이 $165,000 이하일 때 가장 경제적인 것으로 파악되었다.

  • PDF

Parametric Analysis of Design Capacity for Tritium Removal Facility

  • 손순환;정양근;이철언
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.05b
    • /
    • pp.250-255
    • /
    • 1997
  • 중수로형(PHWR) 원자력발전소는 감속재와 냉각재로 중수를 사용하고 있어 방사성 수소동위원소인 삼중수소 생성량이 경수로에 비해 크며 계통내 삼중수소 축적량은 운전년수에 따라 증가하게 된다. 중수로형 원전에서 삼중수소 저감화를 위한 장기 대책으로 Tritium Removal Facility를 적용하는 경우, 우선적으로 괴려하여야 할 사항은 적절한 TRF의 용량을 결정하는 것이다. 이는 초기 시설 투자비뿐만 아니라 설비 및 운전의 신뢰도와 이용율에도 영향을 미치므로 연속운전이 가능하도록 용량을 결정하는 것이 중요하다. 이를 위해 감속재를 대상으로 삼중수소 농도 목표치, 삼중수소 농도 목표치 도달기간, 탈 삼중수소율, TRF 적용시점이 TRF 처리량과 촉매탑 높이에 미치는 영향을 분석하였다. 삼중수소 농도 목표치는 5~15Ci/kg, 도달기간은 3~8년, 탈 삼중수소율은 0.05~0.4, TRF 적용시점은 가동 후 10~20년이 적절한 것으로 확인되었다.

  • PDF

우리나라 항공기산업의 산업연관효과의 변동추이

  • Lee, Gi-Sang;Lee, Mu-Yeong
    • The Journal of Aerospace Industry
    • /
    • s.66
    • /
    • pp.57-81
    • /
    • 2003
  • 우리나라 항공기 산업은 아직도 발전의 초기단계로 크게 심한 해외의존성으로 인해 항공기산업 내부에서 공급되는 주요정밀 부품은 주로 외국으로부터 도입하는 등 여전히 취약한 산업구조를 지니고 있기 때문에 생산유발효과나 부가가치유발효과 등 산업연관효과를 크게 나타나고 있지 않다. 이러한 낮은 연관효과로 인해 부가가치율의 크기는 크지 않지만, 영업잉여는 높은 불균형적 부가가치구조를 지니고 있다. 또한 항공기산업의 육성 및 발전을 도모할 수 있는 인력과 시설투자가 여전히 미약한 수준이어서 기술적, 산업적 측면에서 취약성을 노출시키고 있다. 따라서 안정적 생산물량의 확보, 기술자립도의 증가, 지속적인 인력 및 투자수준의 제고 등을 위한 효율적이고 장기적인 발전전략수립이 절실히 요구된다고 볼 수 있다. 따라서 우리나라 항공기산업의 발전의 추진방향은 기술자립도의 제고를 통한 대외의존성의 약화, 고부가가치화, 수요창출을 기반으로 하는 생산계획 수립, 제도완화 및 부서의 통합기능을 강조하는 정부개입 등의 방법에서 모색되어야 할 것이다.

  • PDF