• Microbiology and Biotechnology Letters
• /
• v.30 no.2
• /
• pp.184-188
• /
• 2002

A bacteriocin producing microorganism, which inhibits the growth of Lactobacillus sake, was screened and isolated from Kimchi. This microorganism was identified and named as Lactobacillus sp. Oh-B3, The maximum amount of bacteriocin was produced when the isolated microorganism was cultured in MRS media(pH 8.0) for 24 hours at 25℃. The bacteriocin from the isolated microorganism was purified through ammonium sulfate precipitation, dialysis and ultrafiltration. The bacteriocin was stable on the wide pH range of 2.0-9.0, and showed antimicrobial activity on some of gram positive bacteria, not on gram negative. The antimicrobial activity of bacteriocin was mostly removed by treatment of proteolytic enzymes. But, the bacteriocin was very stable on the heat treatment, and more than 50％ of activity was remained at autoclaving. The action mode of the bacteriocin showed bacteriocidal pattern, being same as that of general bacteriocins.

• Composites Research
• /
• v.27 no.6
• /
• pp.254-259
• /
• 2014

In this study, a device and pressure press process that is able to substitute autoclave process is developed. This process complements disadvantages of autoclave process which are long process-time and high production cost. The developed device provides air pressure as well as the vacuum which are greatest feature of autoclave process. The device is sealed using hydraulic pressure to keep the air pressure inside the mold. The transfer of the heat is designed to be direct. The heating and pressure charging time are decreased by reducing the interior space. Tooling cost is reduced dramatically compared to autoclave process. Spring-back phenomenon is measured and compared. The temperatures of several parts of the mold during molding are measured. The fiber volume fraction of the parts molded by autoclave process and by the developed process are compared.

• Korean Journal of Materials Research
• /
• v.8 no.3
• /
• pp.229-237
• /
• 1998

We grew the hexagonal GaN films on (100) Si and (00.1) sapphire substrates in the temperature range of $300~730^{\circ}C$ by the direct reaction between thermally ionized N-source and thermally evaporated Ga-source. The GaN growth rates are increased at the initial stage of GaN formation and it was saturated to some values by the coalescence of each crystallites. The oxygen signal was observed in XPS spectra for all the GaN films grown in this work, especially low- temperature grown GaN film may due to incorporation of the residual oxygen in the growth chamber. The surface of low-temperature and shorter time grown films covered only Ga-droplets. however, with increasing the both substrate temperature and the growth time GaN is growth to crystallites. and coalescence to ring-type crystallites. With sufficient supply of N-source, they were changed to platelets. In the PL spectrum measured at 20 K, we observed the impurity related emission at 3.32eV and 3.38eV.

• Transactions of the Korean hydrogen and new energy society
• /
• v.10 no.2
• /
• pp.141-149
• /
• 1999

Recently the Ni/MH secondary battery has been studied extensively to achieve higher energy density, longer cycle life and faster charging-discharging rate etc. In this work, the electrode properties of $(LM)Ni_{4.49}Co_{0.1}Mn_{0.205}Al_{0.205}$ alloy and $Ti_{0.6}Zr_{0.4}V_{0.6}Ni_{1.4}$ alloy with addition of Pd were investigated. These alloys did not show any change in XRD pattern by Pd addition. As Pd was added as alloy element, the activation behavior was not affected significantly in both $AB_2$ type and $AB_5$ type electrodes and, On charging and discharging in high current density, Discharge capacity with increasing of Pd content was more decreased. But cycle life was showed increasing. Especially the electrode of $Ti_{0.6}Zr_{0.4}V_{0.6}Ni_{1.4}+0.5wt%$ Pd alloy was not almost decreased discharge capacity for 400cycles.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.45-49
• /
• 1999

A flammable gas sensor based on the $SnO_2$thin film deposited by the reactive ion assisted deposition was fabricated and ultra-thin Pd layer as catalyst was adsorbed at surface by ion beam sputtering. The initial oxidation states of Pd catalyst were controlled to investigate the role of Pd in the sensing process of inflammale gas sensor through annealing in air and vacuum respectively. The Pd catalyst existing in pure metallic state showed the sensitivity higher than that of PdO. The result might be closely related to the fact that PdO as a surface acceptor would receive electrons via Pd sub-channel from $SnO_2$, and thus which reduces the sensitivity and delay the response time.

• Journal of the Korean Ceramic Society
• /
• v.35 no.11
• /
• pp.1155-1161
• /
• 1998

We have studyed the surface electric resistiance for inner conductive film consisted of graphite and iron oxide by coating the conductive paint on inner face of 28" wide CRT funnel and have evaluated the working properties of 28" wide CRT according to the surface electric resistiance. We found that the viscosity of paint and the thickness of conductive film became the higher but the surface electric resistiance of con-ductive films was the lower than before in accordance with the increase of solid contents in conductive paint and that the surface condition and the surface electric resistiance of conductive films changed highly ac-cording to the drying conditions also. From these results we could get the uniform thickness and the un-iform film resistance and the optimum working property of selectric propertise in CRT when we used the conductive paint with solid contents 28% and viscosity about 13cps.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1442-1444
• /
• 2003

폴리머 애자용 shed 재료의 전기방전에 대한 열화내성과 표면이 오염된 조건하에서도 우수한 발수성 유지는 제품의 장기성능에 있어서 가장 중요한 인자들이다. 내트래킹성 확보를 위한 보강재로는 ATH가 주로 사용되고 있으며 ATH의 첨가량이 많을 수록 내트래킹성은 대체로 향상되는 것으로 되어 있다. 그러나 애자 제조시 무결점 성형성의 만족이 대단히 중요하기 때문에 ATH를 고충진하는 경우 사용하는 process oil들의 종류 및 첨가량을 고려한 ATH 첨가량의 최적화는 필요하다. 본 논문에서는 ATH를 170 part로 다량으로 첨가하면서 화학적 구조와 점도가 다른 몇 가지 실리콘 fliud들을 사용하여 무결점 성형에 적합한 가소도를 갖는 컴파운드를 제조하여 기본물성과 초고압 옥외절연물의 shed 재료로서 장기성능에 영향을 주는 방전열화내성과 표면발수성의 회복특성을 평가하였다. 컴파운드의 성형작업성과 관련이 큰 가소도는 fluid 점도에 따라 상당한 차이를 보이므로 실리콘 fluid 종류의 선택과 첨가량의 최적화에는 성형작업성, 발수성 회복특성, 열화내성 등의 고려가 필요하다. 무결점 애자성형을 위한 진공 사출에서 고무 컴파운드의 가소도가 중요한데 동일한 ATH첨가조건에서 일정한 가소도를 갖게 하는데 필요한 양은 fluid들의 종류에 따라서 상당한 차이가 있었다. 코로나 처리후 발수성 회복특성은 fluid들의 분자크기와 반응기의 종류에 따라 상당히 영향을 받았으며 분자가 클수록 초기회복속도는 다소 느렸지만 평상시에 늘 유지되는 상시발수성은 다소 높게 유지되었다. 아크와 트래킹 방전에 의한 무게 감소는 ATH가 과량으로 첨가되어 상당히 적었으며 fluid의 분자가 크면서 페닐기를 가진 fluid들이 첨가된 고무가 우수한 특성을 보였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.144-144
• /
• 2012

스퍼터링 기술은 타겟 사용 효율 및 증착률 향상 개념에서의 소스 특성향상과, 증착 기판으로 이동하는 스퍼터링 입자량 및 이온화율 제어를 통한 코팅 박막의 특성향상 등 크게 두 축을 중심으로 발전되어 왔다. 특히 소스 특성 향상 관점에서 고진공에서의 스퍼터링 기술, 듀얼 마그네크론 스퍼터링 및 무빙 마그네트론 스퍼터링 기술 및 원통형 스퍼터링 기술이 개발되어왔으며, 코팅 박막의 특성 향상과 관련하여서는 스퍼터링 방전 내 플라즈마의 밀도의 증대 및 기판 입사 입자의 에너지 제어를 통한 박막의 치밀도 향상 연구가 많이 이루어져, UBM 또는 ICP 결합 스퍼터링 및 Arc-스퍼터링 혼합공정이 연구되어 왔다. 박막 증착에서 박막의 물성을 조절하는 주요인자는, 기판에 입사하는 입자의 에너지로, 그 조절 범위가 좁고 넓음에 따라 활용 가능한 코팅 공정의 window가 설정된다. 지난 15년간 증착박막의 물성 향상을 위하여 스퍼터링 소스의 제어 관점이 아닌 전원적 관점에서 스퍼터된 입자의 에너지 제어를 MF(kHz), Pulse 전원 사용을 통해 이루어져 왔고, 특히 High Impulse Pulse를 이용한 HiPIMS 기법이 연구개발과 시장의 이해가 잘 어울려져 많은 발전을 이루고 있다. HiPIMS 공정은 박막의 물성을 제어하는 관점을 스퍼터링에 사용되는 보조 가스인 Ar 이온에 의존하지 않고, 직접 스퍼터된 입자의 이온화를 증대시키고, 이 이온화된 입자를 활용하여 증착 박막의 치밀성 및 반응성을 증대시켜, 박막특성을 제어하는 기술이다. HiPIMS의 경우, 초기 개발 당시에는 고에너지, 고이온화의 금속 이온을 대량 생성할 수 있다는 이론적 배경에서 연구되었다. 그러나 연구 개발이 진행되면서, 박막의 물성과 증착률 등 상반된 특성이 나타나면서 이에 대한 전원장치의 개량이나 스퍼터링 소스의 개선 등 다양한 개발 연구들이 요구되고 있다. 재료연구소에서는 스퍼터링 기술에서 가장 문제가 되고 있는 타겟 사용효율화 관점 및 스퍼트된 입자의 이온화률 증대에 대한 두 가지 문제를 동시에 해결할 수 있는 방안으로 고밀도 플라즈마를 이용한 스퍼터링 기술을 개발하고 있다. 본 발표에서는 이러한 HiPIMS의 연구 개발 동향과 고밀도 플라즈마를 이용한 스퍼터링 기술에 대한 연구 동향을 발표하고자 한다.

• Composites Research
• /
• v.33 no.6
• /
• pp.390-394
• /
• 2020

The carbon fiber has been damaged via tow spreading process for carbon fiber spread tow. The fiber damage is caused by friction between equipment and fibers or between fibers and fibers in the process of spreading. As a result, mechanical properties are decreased due to differences in process via material and equipment condition. Therefore, minimizing fiber damage have to be considered in the process. In this study, the change in carbon fiber pneumatic spreading process was observed by according to the filament count, sizing content of carbon fiber and process variables in spreading equipment (fiber tension at the beginning, air temperature in spreading zone, vacuum pressure in spreading zone). Tensile strength was evaluated using samples prepared under optimal conditions for each of the carbon fiber varieties, and mechanical properties were reduced due to damage on the carbon fiber.

• Journal of Chest Surgery
• /
• v.42 no.4
• /
• pp.418-425
• /
• 2009

Background: Cardiopulmonary bypass (CPB) involves use of an initial priming volume which can cause side effects such as hemodilution, transfusion, inflammatory reaction and edema. Hence, there have been efforts made tore-duce the initial priming volume. We compared this traditional method to a CPB method that uses a minimized priming volume (MPV). Material and Method: For 97 patients who underwent congenital cardiac surgery between July 2007 to June 2008, we discussed each case and decided which method to use. We reviewed the medical records and cardiopulmonary bypass sheets of the patients. Result: We used a MPV method for 46 patients, and a traditional method for the other 51. There were no significant differences in preoperative and intraoperative characteristics between the two groups, such as body weight, age, cardiopulmonary bypass time, lowest body temperature, etc. However, the priming volume was much smaller in the MPV group than the traditional group (p<0.001). The volume of initially mixed packed RBC was also much smaller in the MPV group (p<0.001). There were no significant differences in postoperative mortality and neurologic complications. Conclusion: We could significantly reduce the initial priming volume and initially mixed pRBC volume with the revised CPB method. We suggest that this method be used more widely for congenital cardiac surgery.