• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.340-346
• /
• 2008

This study investigated the microbial safety of apple snails and intermediate-moisture-content apple snail products subjected to various treatments, according counts of total bacteria, Escherichia coli, mold and yeast during storage at 4C Heating of raw apple snails at 95C for 5 min increased the storage period in relation to total bacteria, E. coli, mold and yeast-cell growth. Addition of 10% NaCl and 50% vinegar increased the microbial safety of apple snails. Microorganisms were not detected for 14 weeks in vacuum-packaged intermediate-moisture-content apple snail products stored at either 4C or 30C. These results suggest that heat treatment of raw apple snails, soaking in 10% NaCl and 50% vinegar solutions, and vacuum-packaging increases the shelf-life and microbial safety of apple snail products.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.5
• /
• pp.535-542
• /
• 2015

A reactor containment acts as a final barrier to prevent leakage of radioactive material due to the possible reactor accidents into external environment. Because of the functional importance of the containment building, the SIT(Structural Integrity Test) for containments shall be performed to evaluate the structural acceptability and demonstrate the quality of construction. In this paper, numerical analyses are presented, which simulate the results obtained from the SIT for a prestressed concrete(PSC) structure. A sophisticate structural analysis model is developed to simulate the structural behavior during the SIT properly based on various preliminary analysis results considering contact condition among structural elements. From the comparison of the analysis and test results based on the acceptance criteria of ASME CC-6000, it can be concluded that the construction quality of the containment has been well maintained and the acceptable performance of new design features has been verified.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.353-361
• /
• 2019

The aim of this study was to evaluate the color stability of bulk-fill and conventional resin composites with respect to different storage media and thickness of composites. Filtek™ Z250 and Filtek™ Z350XT were evaluated as conventional resin composites. Filtek™ Bulk-fill Posterior Restorative and Tetric^® N-Ceram Bulk Fill were evaluated as bulk-fill resin composites. CIE L^*a^*b^* values of baseline were measured after 24 hours of storage in distilled water, and each resin composite group was divided into three subgroups and stored in distilled water, red wine, and coffee media respectively. Again after 1, 7 and 28 days of immersion, color changes (ΔE^*) were calculated using the CIE L^*a^*b^* values. The greatest ΔE^* was observed in red wine for all resin composites, and the mean color changes were ranked in the increasing order of distilled water, coffee, red wine. Filtek™ Z350XT exhibited the greatest color change in all media, followed by Filtek™ Bulk-fill Posterior Restorative. Filtek™ Z250 and Tetric^® N-Ceram Bulk Fill followed with similar mean color change values. According to the 2 different thicknesses of 2 mm and 4 mm of bulk-fill resin composites, there was no thickness-related difference on color changes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.121-129
• /
• 2017

In this paper, the shake table test for the masonry infilled reinforced concrete frame with non-seismic details was carried out in order to evaluate its dynamic behaviour and damage under seismic condition. The tested specimens were the RC frame and the masonry infilled RC frame and the dynamic characteristics, such as a resonant period, acceleration response, displacement response and base shear force response, were compared between them. As a result of the shake table test, RC frame specimen had flexural cracks at the top and bottom of the column and shear cracks at the joints. In the case of masonry infilled RC frame, the damage of the frame was relatively minor but the sliding cracks and diagonal shear cracks on the masonry wall were severe at the final excitation. The resonant period of infilled RC frame specimen was shorter than that of the RC frame specimen because the masonry infill contributed to increase the stiffness. The maximum displacement response of the infilled RC frame specimen was decreased by about 20% than the RC frame specimen. It was analyzed that the masonry infill wall applied in this study contributed to increase the lateral strength of the RC frame with non - seismic detail by about 2.2 times and the stiffness by about 1.6 times.

• Journal of Embryo Transfer
• /
• v.18 no.1
• /
• pp.35-41
• /
• 2003

Three experiments were performed to develop an optimal culture system of in-vitro derived porcine embryos. In experiment 1, embryos were cultured in two different basic culture media (NCSU-23 and PZH) supplemented with BSA (4mg/ml), FBS (10%), PVA (3mg/ml). Although no difference on the percentage of embryos developed to blastocysts was found (P>0.05), more 2-cell embryos (59.5% vs. 44.7 to 52.0%) were obtained when embryos were cultured in NCSU-23 added with BSA. In experiment 2, identical treatment was conducted using PZM medium. More (P<0.05) 2-cell embryos (54.4% vs. 40.7 to 44.5%) and blastocysts (12.5% vs. 5.8 to 9.0) were produced when embryos were cultured in PZM added with BSA (4mg/ml). In experiment 3, embryos were cultured in media as follows; 1) NCSU-23 without BSA for 192 hours; 2) NCSU-23 with BSA for 192 hours; 3) NCSU-23 with BSA for 96 h and then subsequently injected with FBS into culture drops. Although no difference on the percentage of embryos developed to blastocysts was found (P>0.05), more 2-cell embryos (63.8 to 69.2% vs. 52.0%) were obtained when embryos were cultured both in NCSU-23 added with BSA throughout culture duration and in FBS supplemented medium. In conclusion, no difference was found when porcine preimplantation embryos were cultured in NCSU-23 added with various macromolecules. However, when PZM medium was used, PZM medium supplemented with BSA showed more potential to support embryo development. Finally, FBS supplemented into culture drop 96h post-insemination did not show any benefits on embryo development.

• Tunnel and Underground Space
• /
• v.20 no.2
• /
• pp.105-111
• /
• 2010

This study is to consider applicability of spiral bolt strain gauge as an instrument measuring behavior of soft ground foundation and rock slope. When the instrument was installed on the ground, it can be useful to identify the state of ground behavior because it has the characteristics of flexibility, as well as to apply the ground reinforcement because it has higher pull-out resistance to the ground. From the measurement of behavior to soft ground foundation, the strain shows a stable state in the beginning, then was observed significant change in the upper and the middle of spiral bolt strain gauge after 400 days. This is analyzed that ground loosening, which is due to occurred frequent earthquake of magnitude 1~2 with increased rainfall, lead to the instability of the ground. From the measurement of behavior to rock slope, the strain shows a stable state with very little change in a period of 0~50 days and the biggest strain at 4.2 m (P6) in a period of 50~100 days, then other places except P6 was maintained at a stable state in a period of 100~160 days. The reason is analyzed because that blasting for excavated limestone surrounding was affected to the largest at P6. However, based on the size of strain change by behavior of the soft ground foundation and rock slope, it is considered that the present condition are not effected on stability of retaining structure and rock slope. In conclusion, the proposed spiral bolt strain gauge can be useful to measure behavior of soft ground foundation and rock slope, and also to be measured behavior as well as reinforcement of the target ground.

• Horticultural Science & Technology
• /
• v.18 no.2
• /
• pp.98-102
• /
• 2000

This experiment was conducted to determine the effect of chemicals and their concentrations, priming temperature and duration, and different germination temperature on germinability of salvia seeds. The highest percentage of germination was obtained with 50 or 100 mM $KH_2PO_4$, or with -0.50 or -0.75 MPa PEG 8000. When number of days to attain 50% of the final germination percentage (T50) and mean number of days to germination (MDG) were taken into account, 50 mM $KH_2PO_4$ or -0.50 MPa PEG was most effective for early germination. No seeds germinated when primed in $K_3PO_4$ or NaOH solution. Priming the seeds at $20^{\circ}C$ was better than priming at $15^{\circ}C$ or $25^{\circ}C$. Priming at $20^{\circ}C$ for 4 or 6 days reduced the MDG by 2.3 days compared with nonprimed seeds. Seeds primed with -0.50 MPa PEG at $20^{\circ}C$ showed a high germination percentage with reduced T50 and MDG. When seeds were primed in a mixture of -0.50 MPa PEG and 50 mM $KH_2PO_4$ solution and germinated at $30^{\circ}C$ or $35^{\circ}C$, percent germination was lower than nonprimed seeds. However, the combined treatment retained the priming effect for reducing T50 and MDG.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.12 no.1
• /
• pp.67-77
• /
• 2008

Seismic isolation has been studied continuously as a solution of the seismic engineering to reduce the sectional forces and the damages of structures caused by earthquakes. To certify reliable design and installation of the seismic isolation systems, seismic isolation bearings should be fabricated under well planned quality control process, and proper evaluation tests for their seismic performance should be followed. In this study, shear property evaluation tests for the lead rubber bearings(LRB) and the rubber bearings(RB) were implemented and the temperature dependency tests were also implemented to evaluate the changes of shear properties according to the changes of temperature. After evaluation tests, the measured shear properties were compared to their design values and their deviation was analyzed comparing with the allowable error ranges specified in Highway Bridge Design Specifications. These results showed that a considerable number of isolation bearings have so large deviations from their design values that their error ranges were over or very close to the allowable ranges. And the test results for temperature dependency showed that the shear properties of isolation bearings would be changed in great degree by the change of temperature during their service period. If these two types of changes in their shear properties are superposed, it would possible that the changes of shear properties from their original design values are over than 50%.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.1
• /
• pp.88-96
• /
• 2020

It were found that the heavyweight waste glass can be used as a construction materials including concrete from previous experimental studies. In this study, in order to evaluate the structural behavior of RC members using heavyweight waste glass as fine aggregate, a flexural behavior test was performed. And then, its results were compared with those obtained from non-linear finite element model analysis. From the results, when the heavyweight waste glass as fine aggregate in RC member, the area of compressive crushing and the number of cracks increased, however, the mean of cracking spacing decreased. Also it had reduced the ductility at high loading stage. For this reason, the same analysis method about the RC member using natural sand as fine aggregate did not predict the initial stiffness, yield load and maximum load on the flexural behavior of the RC members using heavyweight waste glass as fine aggregate. On the other hand, when it is analytically implemented the reduction of neutral axis depth due to developed compression crushing, the results of non-linear finite element analysis could be predicted the experimental results, relatively well.

• (The)Study of the Eastern Classic
• /
• no.48
• /
• pp.7-39
• /
• 2012

This study is prepared to understand the filial story's communicative meaning from the aspects of Character's behavior. The filial story have typically didactic theme and it is not have enough room for another interpretations. But if we carefully analyze the filial story from the point of view of (1)the target of the filial duty[father/ mother]. (2) the actor of the filial duty[son/ daughter]. (3) the evaluator of the filial duty[witness/ recorder], we can understand the filial story's connotation. In "三國遺事"(Memorabilia of the Three Kingdoms) and "三國史記"(Historical Records of the Three Kingdoms), the target of the filial duty plays an important part and communicates with the actor of the filial duty but there's no more communication in "高麗史"(History of Corea). As the character's communication is lessened, the meaning of edification is emphasized.