• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.10
• /
• pp.836-843
• /
• 2017

In lunar exploration, the necessity of utilizing rover is verified by the examples of the Soviet Union and China and the similar Mars missions of the United States. In order to achieve the successful management of a lunar rover, a high precision navigation technique is required, and accordingly, high precision initial alignment is essential. Even though it is general to perform initial alignment in a steady state, a multiposition alignment technique is applied when high performance is needed. On the lunar surface, however, the performance of initial alignment decreases from that on Earth, and it cannot be improved by applying multiposition alignment method owing to certain constraints of lunar environment. In this paper, a sun sensor aided multiposition alignment technique is proposed. The measurement model for a sun vector is established, and its observability analysis is performed. The performance of the proposed algorithm is verified through computer simulations, and the results show the estimation performance is improved dramatically.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.253-258
• /
• 2016

This paper proposes a method that utilizes optimization approach for localization of an indoor mobile robot. Bayesian filters which have been widely used for localization of a mobile robot use many control parameters to take the uncertainties in measurement and environment into account. The estimation performance depends on the selection of these parameter values. Also, the performance of the Bayesian filters deteriorate as the non-linearity of the motion and measurement increases. On the other hand, the optimization approach uses fewer control parameters and is less influenced by the non-linearity than the Bayesian methods. This paper compares the localization performance of the proposed method with the performance of the extended Kalman filter to verify the feasibility of the proposed method. Measurements of ranges from beacons of ultrasonic satellite to the robot are used for localization. Mahalanobis distance is used for detection and rejection of outlier in the measurements. The optimization method sets performance index as a function of the measured range values, and finds the optimized estimation of the location through iteration. The method can improve the localization performance and reduce the computation time in corporation with Bayesian filter which provides proper initial location for the iteration.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.199-204
• /
• 2002

Since motion estimation and motion compensation methods remove the redundant data to employ the temporal redundancy in images, it plays an important role in digital video compression. Because of its high computational complexity, however, it is difficult to apply to high-resolution applications in real time environments. If we have information about the motion of an image block before the motion estimation, the location of a better starting point for the search of an exact motion vector can be determined to expedite the searching process. In this paper, we present an adaptive motion estimation approach bated on temporal correlations of consecutive image frames that defines the search pattern and determines the location of the initial search point adaptively. Through experiments, compared with DS(Diamond Search) algorithm, the proposed algorithm is about 0.1∼0.5(dB) better than DS in terms of PSNR(Peak Signal to Noise Ratio) and improves as high as 50% compared with DS in terms of average number of search point per motion vector estimation.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.622-627
• /
• 2019

This paper propose an initial rotor position detection method for sensorless operation of a single-phase permanent magnet synchronous motor(SP-PMSM) with asymmetric air-gap. In general, the sensorless control based on back-emf estimation is difficult to estimate the back-emf at the zero and low speed regions. For this reason, an open loop start-up technique is indispensable, and it is also necessary to detect the initial position of the rotor in order to rotate in a certain direction. In this paper, we propose a method to detect rotor polarity by adding offset voltage to high frequency voltage signal based on the magnetic characteristics of SP-PMSM. The validity and usefulness of the proposed algorithm are verified through several experimental results.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.65-66
• /
• 2007

본 논문은 파라미터 변동에 잘 적응하며 강인한 영구자석 동기전동기의 위치센서 없는 센서리스 제어를 위해 개선된 슬라이딩 모드 관측기에 고정자 저항 추정기능을 추가한 새로운 슬라이딩 모드 적응 관측기를 제안한다. 제안된 관측기는 개선된 슬라이딩 모드 관측기를 사용함으로써 기존의 슬라이딩 모드 관측기에서 채터링(Chattering) 문제 해결을 위해 저역통과필터(Low-pass filter)의 사용 및 추가적인 회전자의 위치보상은 Sigmoid 함수를 스위칭 함수로 사용하므로 제거 할 수가 있다. 또한 고정자 저항 추정기능을 추가하여 센서리스 운행 중 환경적 요인으로 인한 고정자 저항값의 변동이나 초기에 고정자 저항값을 잘못 알고 있더라도 빠른 적응을 통해서 추정오차를 절감시켜 전동기의 속도추정 성능을 향상시킬수 있다. 또한 기존의 적응 슬라이딩 모드 관측기에서의 적분연산을 줄임으로써 제어시스템의 성능을 개선시켰다 제안된 관측기의 안정성은 Lyapunov 후보 함수를 이용하여 관측기의 이득을 설정함으로써 검증하였으며 관측기의 성능은 시뮬레이션을 통한 실험을 통하여 그 타당성을 입증하였다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.178.2-178.2
• /
• 2012

정지궤도위성은 발사체에서 위성이 분리된 이후 천이궤도로부터 원하는 목표궤도로 궤도전이를 해야 한다. 또한 임무기간동안 궤도상에서 다양한 교란을 겪게 되며 이로 인해 시간이 증가함에 따라 위성의 위치가 변화하게 된다. 정지궤도위성은 이러한 궤도전이 및 궤도상 위치변화를 제어하기 위한 추진시스템을 장착하고 임무기간에 걸쳐 요구되는 추진제를 탑재해야 한다. 위성의 설계 초기에는 추정되는 위성의 건조질량을 기반으로 하여 궤도전이와 궤도상 임무에 필요로 하는 추진제 버짓을 계산하고 이를 토대로 하여 위성 시스템 설계를 진행한다. 또한 발사체별로 발사체의 성능과 발사장에 따라 근지점고도와 발사 경사각이 모두 상이하므로 발사체가 정해지지 않은 상태에서 발사체별 추진제 버짓을 계산, 비교하고 추진 시스템의 탱크가 이를 모두 수용할 수 있는지 분석하는 것이 중요하다. 본 논문에서는 정지궤도복합위성의 추정 건조질량과 임무분석을 통해 주어진 ${\Delta}V$와 각 발사체별 궤도전이에 필요한 ${\Delta}V$를 바탕으로 하여 발사체별 추진제버짓을 계산하였고 이를 비교검토 하였다. 이후 이러한 기본 자료를 바탕으로 하여 정지궤도복합위성 추진시스템의 추진제 수용가능 여부, 건조질량 증가 여유 등 기본설계를 진행할 수 있다.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1125-1139
• /
• 2022

In an unmanned aerial vehicles (UAVs) system, a physical offset can be existed between the global positioning system/inertial measurement unit (GPS/IMU) sensor and the observation sensor such as a hyperspectral sensor, and a lidar sensor. As a result of the physical offset, a misalignment between each image can be occurred along with a flight direction. In particular, in a case of multi-sensor system, an observation sensor has to be replaced regularly to equip another observation sensor, and then, a high cost should be paid to acquire a calibration parameter. In this study, we establish a precise sensor model equation to apply for a multiple sensor in common and propose an independent physical offset estimation method. The proposed method consists of 3 steps. Firstly, we define an appropriate rotation matrix for our system, and an initial sensor model equation for direct-georeferencing. Next, an observation equation for the physical offset estimation is established by extracting a corresponding point between a ground control point and the observed data from a sensor. Finally, the physical offset is estimated based on the observed data, and the precise sensor model equation is established by applying the estimated parameters to the initial sensor model equation. 4 region's datasets(Jeon-ju, Incheon, Alaska, Norway) with a different latitude, longitude were compared to analyze the effects of the calibration parameter. We confirmed that a misalignment between images were adjusted after applying for the physical offset in the sensor model equation. An absolute position accuracy was analyzed in the Incheon dataset, compared to a ground control point. For the hyperspectral image, root mean square error (RMSE) for X, Y direction was calculated for 0.12 m, and for the point cloud, RMSE was calculated for 0.03 m. Furthermore, a relative position accuracy for a specific point between the adjusted point cloud and the hyperspectral images were also analyzed for 0.07 m, so we confirmed that a precise data mapping is available for an observation without a ground control point through the proposed estimation method, and we also confirmed a possibility of multi-sensor fusion. From this study, we expect that a flexible multi-sensor platform system can be operated through the independent parameter estimation method with an economic cost saving.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.702-709
• /
• 2010

The performance of mass segmentation is greatly influenced by an initial position of a mass. Some researchers performed mass segmentation with the initial position of a mass given by radiologists. The purpose of our research is to find the initial position for mass segmentation and to notify the segmented mass to radiologists without any additional information on mammograms. The proposed system consists of breast segmentation by region growing and opening operations, decision of an initial seed with characteristics of masses, and mass segmentation by a level set segmentation. A seed for mass segmentation is set based on mass scoring measure calculated by block-based variances and masked information in a sub-sampled mammogram. We used a DDSM database to evaluate the system. The accuracy of mass detection is 78% sensitivity at 4 FP/image, and it reached 92% if multiple views for masses were considered.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.2 s.35
• /
• pp.279-290
• /
• 1998

An existing Damage Index Method is verified to demonstrate its feasibility for detecting structural damage in truss bridges (1) for which modal parameters are available for a few modes of vibration and (2) for which baseline modal information is not available from its as-built state. The theory of approach to detect locations of damage and to identify baseline modal model is summarized on the basis of system identification theory and modal sensitivity theory. The feasibility of the Damage Index Method is demonstrated using a numerical example of a truss bridge with 11 subsystems of 211 members and for which only two modes of vibration were recorded for post-damaged state.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.2
• /
• pp.202-209
• /
• 2014

In this paper, a developed device for detecting target's location and avoiding collision is proposed. Velocity and acceleration model of target are derived to estimate target's information, i.e. position, velocity and acceleration considering process and measurement noise. Kalman filtering method applied to the estimation process and its results was confirmed by simulation. The distance measurements system using laser sensor for moving target system is also developed to confirm the effectiveness of the proposed scheme. Experiments to get information of moving target with velocity and acceleration model was executed. The data with filtering and without filtering was compared by experiments. Discontinuous measured data was changed to smooth and continuous data by Kalman filtering. It is confirmed that desired data was obtained by applying proposed scheme. UI for measuring and monitoring the target data is developed and visual and auditory alarm function is attached on the system Finally, position estimation system of moving target with good performance is achieved by low price equipments.