• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.224-224
• /
• 2004

제품 개발 초기 단계에서 제품의 개념을 신속하게 구체화하여 제품의 기능, 구성, 부품 간 관계, 치수 및 간단한 형상들을 정의한 후, 검증(해석 및 실험)을 통해 가장 최적화된 설계 결과를 얻는다. 그러나 이 과정에서 일반적으로 설계 정보를 바탕으로 해석을 수행하기 위한 모델을 새롭게 생성해야 하는 문제가 있다. 또한 설계 변경이 발생하는 경우에는 도면을 다시 작성하고 해석 모델이 재생성 및 부품 생성을 위하여 데이터 입력을 다시 해야 한다. 이러한 문제는 선박의 초기 설계 및 해석 분야에서도 발견할 수 있다.(중략)

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.368-376
• /
• 2015

This paper is the study on the establishment of design model to improve design efficiency using modified weight estimation equation on the initial design stage for development of a helicopter. The methodology to extract coefficients of the weight estimation equation was proposed through the influence investigation for the weight of components and the parameter study and sensitivity analysis for design variables such as the rotor disk loading, the number of blade and the aspect ratio of blade were also performed. As a result of study, the relation of parameters and degree of sensitivity of parameters on helicopter design are considerable points for optimization of helicopter characteristics, and it is necessary for designer to consider the complex relation of main parameters.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.2 s.24
• /
• pp.115-124
• /
• 2007

The initial shape is arrived at by a self-formation process, which accomplishes a form in the natural world, or is determined analytically by considering the equilibrium of initial stress only. Therefore, the self-formation process, which accomplishes a form in the natural world is grasped and the types of modeling techniques available to find the shapes of soft structures are well investigated and classified. To establish a form-finding modeling techniques, the models of string, soap film, fabric, rubber, plaster, and etc. are used. These modeling techniques can be used as a method of understanding the characteristics of structures when the material of model shows similar characteristics. Generally, the model test confirms the structure based on numerical analysis, at the same time it is important preceding process to develop such a program. With the above process, the relationship between model test and numerical analysis becomes a feedback process. Therefore, in this study, two examples which have been accomplished from such a technique are investigated and considered according to modeling process.

• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.34-42
• /
• 2005

This paper presents the optimum initial design containing the first and third order properties of the three-group zoom system using lens modules, and the real lens design of the system. The optimum initial design with focal length range of 4.3 mm to 8.6 mm is derived by assigning appropriate first and third order quantities to each module along with the specific constraints required for the system. An initial real lens selected for each group has been designed to match its focal length and the first orders into those of the each lens modules, and then combined to establish an actual zoom system by adjusting the air space between the groups at all zoom positions. The combination of the separately designed groups results in a system which satisfies the first order properties of the zoom system composed of the original lens modules. As a result, by residual aberration correction, we could obtain a zoom system useful in compact digital zoom cameras and mobile phone cameras employing the rear focus method.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.147-154
• /
• 2010

In post-tensioned concrete pavement(PTCP), one of the most important design variables is the initial joint width, in addition to the tensioning spacing. The joint width between PTCP slabs directly affects noise and ride quality. If the joint width is too wide, noise increases and ride quality decreases. If the initial joint width is too narrow, on the other hand, under high temperature, PTCP slabs can blow up, or failures near the joint can occur due to excessive compressive stresses. This study was conducted to determine the optimal initial joint width of PTCP and to investigate the joint width behavior under temperature changes. The experiments were performed using one-year-old PTCP slabs. The concrete temperatures were measured using the temperature measurement sensors installed at various depths. The joint widths were measured using vernier-calipers at different times of a day and the relationship between the joint width and temperature was analyzed. From this study, the design methodology to determine the optimal initial joint width of PTCP could be proposed.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.265-268
• /
• 1998

본 논문에서는 1채널(mono)이나 2채널(stereo)의 오디오 입력을 5채널(center, left, right, left side, right side)로 출력시키는 음장 시스템을 설계하고 그 성능을 분석하였다. 가정의 리스닝 룸 같이 작은 공간에서 콘서트 홀 같은 커다란 공간의 음장을 재현하기 위한 멀티 채널 음장 시스템은 지연기, 초기 반사음처리기, 잔향기를 이용해 설계하였다. 초기 반사음 처리기의 지연과 이득은 실제 공간에서 측정한 암펄스 응답을 이용하여 결정하였으며, 구현된 초기 반사음을 전방 30$^{\circ}$방향에서 재생함으로써 확장감을 증가시킬 수 있도록 하였다. 잔향기는 자연스러운 주파수 및 감쇠 특성을 갖도록 설계되었으며, 후방 60$^{\circ}$방향에서 재생되는 잔향의 상관 계수를 작게 함으로써 청취시 공간감을 느끼게 하였다. 설계된 음장 시스템은 무향실 데이터를 입력으로 시뮬레이션되었고, 그 결과로 얻어진 5개의 PCM 출력은 멀티 트랙 재생 장치에 의해 일반 리스닝 룸에서 재생된다.

• Journal of Intelligence and Information Systems
• /
• v.4 no.1
• /
• pp.25-40
• /
• 1998

본 논문에서는 경사진 의사결정 트리(oblique decision tree)에 의해 몇 개의 영역으로 분할된 입력공간(input space)에서 우수한 성능을 발휘할 수 있도록 유전적 프로그래밍 트리들(genetic programming trees)과 연합된 다중 인공신경망 시스템을 개발하였다. 다중 인공신경망인 지역 에이전트들(local agents)은 불할된 영역을 책임지며, 유전적 프로그래밍 트리들로 구성된 경계 에이전트들 (boundary agents)은 불할된 영역의 경계부분만을 담당하게 된다. 본 연방 에이전트 시스템을 이용하여 설계 초기단계의 정보 제한성을 극복하고, 선박 초기설계 단계에서 선박 중앙부 형상설계를 수행하여 범용 설계 시스템으로서의 유용성을 검증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.3
• /
• pp.213-223
• /
• 2015

The helicopter initial design model was established by using the latest weight estimation equations based on the Tishchenko's methodology through the study existing initial design tools. The sequential decomposition method is used to reduce analysis time in the sizing. Empirical parameters of the weight estimation equation were also extracted from numerical and regression analysis for a helicopter database. Design input and output values were compared with the RISPECT design tool. Finally, comparison of the re-design resulting for several existing helicopters was presented and showed the good agreement within less than 5% in the weight estimation and main rotor sizing. Established initial design model was proved to be effectively used as initial design tool.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.24 no.4
• /
• pp.375-382
• /
• 2011

Nowadays computer graphic softwares have opened a lot of potential by providing parametric modeling and generative algorithms which are useful not only to describe various geometrical shapes but also to implement a designer's intent in terms of modules systematically. This study has proposed a way of developing a module for generating preliminary structural configuration using such potential computer graphics. Especially parametric modeling and generative algorithm are utilized to define various design alternatives, and moreover use of dynamic graphics enables designers to generate a structural form on one side and a force flow diagram correspondingly provided on the other. This ultimately leads to rational preliminary design of a structural form considering its force flow.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.1
• /
• pp.69-72
• /
• 2002

We propose a modified splitting method to obtain an initial codebook, which is used to design a codebook. The principle of the proposed method is that the more representative vectors are assigned to the class, which has the mere member training vectors or a lower squared error. The conventional K-means algorithm and the method provided from reference (5) are used to estimate the performance of the designed codebook. In thin work, the proposed method shows better results than the conventional splitting method in all experiments.