• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.13-18
• /
• 1991

여기서는 자동차 분야중 Plastic이 가장 많이 적용되고 있는 Bumper의 초기 설계 가능성 확인(Feasibility study) 및 최적 설계를 위한 유동해석, 구조해석 그리고 Blow Molding Back-Beam 해석을 위한 PITA(Polymer Inflation and Thinning Analysis) 등의 기법들에 대한 내용 및 적용 방법 등에 대하여 서술하였다. 특히, Energy Absorbing 역할을 하는 Back-Beam은 Blow Molding에 의한 설계방법에 촛점을 맞추었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.234-241
• /
• 2012

This paper proposes a novel design methodology considering transistor layout variation. The proposed design technique is to improve the transistor's electrical characteristics without performing a circuit simulation to extract transistor layout variation. There are three advantages in the proposed method. Firstly, there is no need to change the normal design flow used in layout designs. Secondly, there is no need to perform simulation in order to extract the transistor layout variation. Thirdly, early warnings in layout design lead to decreasing the number of post layout simulations. Less post layout simulations will decrease the number of iterations in the design cycle and shorten design period. The number of bad transistors in the early design phase were reduced from 17.8% to 2.9% by applying eDRC environment for layout designers to develop Standard Cell Library.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.175-182
• /
• 1997

To design a high resolution three-mirror telescope for visible spectral region, initial design technique based on the generation of flat field anastigmatic solutions limited by mechanical structure was proposed. An initial design of the three-mirror telescope that features relatively high focal ratio(F/14.5), large aperture diameter(600 mm), and squared field of view(0.27$^{\circ}$$\times$1.3$^{\circ}$) was done using an initial design program. Code V was used to optimized the initially designed optical system. As a result, MTF value of the telescope was about 0.5 at Nyquist frequency in each field except for the edge of the CCD.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.3
• /
• pp.49-59
• /
• 2004

The paper describes the preliminary ship design method using deterministic approach and probabilistic approach. In deterministic approach, there are computational aspects to applying not only the integration concurrently of principal dimension decisions and hull form variations but also hydrostatic coefficients that applied to optimization iterative process. Therefore, this paper developed that actual design concept at the preliminary ship design more than sequential design which separated in principal dimension decisions and hull form variations. Furthermore, a probabilistic approach at the preliminary ship design is applied to efficiently solve design information uncertainty that compared to deterministic approach.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.10
• /
• pp.486-492
• /
• 2019

The system-based approach is needed to select an optimal mix of weapon systems and ship platform among a variety of design alternatives with the uncertainties of the initial required operational capability. In the early-phase design, which included a feasibility study and concept design, it is possible to cause problems when a review of the operational concept, database development, and systematic design are not done, thereby producing uncertain and unstable requirements. To select the best solution without trial-and-error, the U.S. navy has applied the set-based method for the early-phase design of a new ship-to-shore connector. The ship synthesis model plays an important role in applying the set-based method, but only a few countries possess this model and have prohibited this model from being transferred to other countries. This paper suggests a set-based method using a genetic algorithm and decision-making theory through benchmarking existing ship data. The algorithm was verified using the DDG-51 class ship synthesis model to optimize the weapon system design, which has been released for research purposes.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.131-134
• /
• 2009

Krylov 부공간 모델차수축소법은 초기 유한요소모델과 축소모델의 전달함수의 계수인 모멘트를 일치시키는 방법을 이용하는 축소기법으로 이미 대형 유한요소모델의 주파수응답 해석의 효율적인 계산에 많이 사용되고 있는 방법 중의 하나이다. 본 논문에서는 Krylov 부공간 축소기법을 이용한 관심 주파수영역에 대한 주파수응답 해석 및 이를 통하여 계산된 주파수응답의 여러 가지 설계변수에 대한 설계민감도 해석방법을 제안하였다. 일반적으로 구조물의 주파수응답을 고려한 최적설계를 위해서는 설계변수에 대한 관심 주파수영역에서의 주파수응답 및 그의 민감도 정보가 요구되므로, 고려하는 유한요소모델이 대형일 경우에 관심 주파수영역에서의 반복적인 해석으로 인한 계산비용의 문제가 대두된다. 본 논문에서는 축소모델을 이용하여 주파수응답과 주파수응답의 설계민감도 해석을 수행하여 계산의 효율성을 극대화하였다. 민감도 계산에는 시간측면과 구현의 용이성 측면에서 장점이 있는 준해석적 방법을 이용하였다. 수치 예제를 통하여 축소기법을 이용한 주파수응답의 설계민감도 해석 결과를 유한차분법에 근거한 민감도 결과와 비교하였다. 본 논문에서 제안된 방법을 이용하는 경우, 주파수응답을 고려한 최적설계를 계산비용 측면에서 매우 효율적으로 수행할 수 있을 것이다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.6
• /
• pp.563-569
• /
• 2016

This paper presents the resizing method of columns and beams that considers column-to-beam strength ratios to simultaneously control the initial stiffness and ductility of steel moment frames. The proposed method minimizes the top-floor displacement of a structure while satisfying the constraint conditions with respect to the total structural weight and column-to-beam strength ratios. The design variable considered in this method is the sectional area of structural members, and the sequential quadratic programming(SQP) technique is used to obtain optimal results from the problem formulation. The unit load method is applied to determine the displacement participation factor of each member for the top floor lateral displacement; based on this, the sectional area of each member undergoes a resizing process to minimize the top-floor lateral displacement. Resizing members by using the displacement participation factor of each member leads to increasing the initial stiffness of the structure. Additionally, the proposed method enables the ductility control of a structure by adjusting the column-to-beam strength ratio. The applicability of the proposed optimal drift design method is validated by applying it to the steel moment frame example. As a result, it is confirmed that the initial stiffness and ductility could be controlled by the proposed method without the repetitive structural analysis and the increment of structural weights.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.99-104
• /
• 1994

초기설계뿐만 아니라 차량개발단계에서 일어날 수 있는 차체구조의 설계변경을 검토할 수 있고 최적화 할 수 있는 차체의 필라구조설계기술의 확립은 저진동 차체설계시 필수적이다. 특히 차량개발기간동안에 언제나 나타날 수 있는 진동문제를 빠른 시간 내에 해결하기 위해서는 차체 구조물의 어떤 부위의 어떤 설계변수를 적절히 변경하여야 하는지를 결정할 수 있어야 한다. 본 논문에서는 저진동 차체의 초기 설계에 적용해 볼 수 있는 효과적인 방법으로서 변형 에너지법, 설계민감도해석법, 최적화설계법 등에 대하여 소개하고 각 방법들의 사용시 유의할 점을 밝혀 보았다. 이런 방법들은 새로운 소프트웨어의 도입이 없어도 현재 국내 자동차회사에서 차체의 응력해석 및 진동해석에 많이 사용하고 있는 유한요소해석 프로그램을 그대로 이용하여 설계에 적용할 수 있으므로 매우 유용하다.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.123-131
• /
• 1992

In ship structural design procedures structural analyses are performed using the scantlings of structural elements determined at the initial design stage based on relevent rules and previous experiences. Modifications of scantlings will be carried out in case that the analysis results do nut satisfy design criteria. Reanalysis method s are efficient to analyse the structures of slightly modified using information obtained from the previous analysis. In this paper various approximate reanalysis techniques will be compared and their characteristics will be described. Furthermore sensitivity analyses are adapted to provide information from which selection of most influential design variables will be made and amount of modification can be determined. Redesign procedures described herein are demonstrated using examples.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.1
• /
• pp.73-80
• /
• 2012

It is important to design the optimal shape in the initial process because the influences on the design and construction are large according to the shape and pattern of spatial structures. However, the existing optimal shape designs for spatial structure are performed by the designer's intuition and experiences. Therefore, this study proposes the integrated process using the topology optimization and cellular automata model. First, the initial optimal shapes are obtained by using the topology optimization, and then the spatial truss structural patterns are created through the application of cellular automata rules. Finally, the optimal shapes to satisfy the various design conditions are generated by the structural analysis and size optimization.