• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.1
• /
• pp.8-23
• /
• 1997

Steady and unsteady numerical simulations are conducted for the comparison with the experiments performed to investigate the ram accelerator flow field by using an expansion tube facility in Stanford University. Wavier-Stokes equations for chemically reacting flows are analyzed by fully implicit and time accurate numerical methods with Jachimowski's detailed chemistry model for hydrogen-air combustion involving 9 species and 19 reaction steps. Although the steady state numerical simulation shows a good agreement with the experimental schlieren and OH PLIF images for the case of $2H_2$＋$O_2$＋$17N_2$ fails in reproducing the combustion region behind the shock intersection point shown in the case of $2H_2$＋$O_2$＋$12N_2$ mixture. Therefore, an unsteady numerical simulation is conducted for this case and the result shows all the detailed flow stabilization process. From the result of unsteady numerical simulation, the experimental result seems to be an instantaneous state during the flow stabilization process. The combustion behind the shock intersection point is the result of a normal detonation formed by the intersection of strong oblique shocks that exist at early stage of the stabilization process. At final stage, the combustion region behind the shock intersection point disappears and the steady state result is retained. The time required for stabilization of the reacting flow in the model ram accelerator is found to be very long in comparison with the experimental test time.

• Journal of Animal Environmental Science
• /
• v.12 no.2
• /
• pp.51-60
• /
• 2006

Studies were carried out using growing to finishing pigs to investigate adequate floor space ($m^2/pig$) in Jeju environment. A randomized block design was used to compare the effect of pig performance on 3 stocking rates (low $0.56 m^2/pig$, medium 0.70 and high 0.90). Liveweight gain and feed intake were measured over a 4 week(Growth stage 1 and Growth stage 2) period or a 3 week(Growth stage 3) period. In growth stage 1 (43 to 65 kg body weight ; BW), daily weight gain was significantly higher in the medium stocking rate than in low or high (P<0.05). However, no significant difference in daily weight gain was found among treatments in growth stage 2(65 to 91 kg) or 3 (91 to 105 kg). Dressing percentage, back fat thickness and carcass grade were also not different (P>0.05). In conclusion, daily weight gain of pigs reared in medium density appeared to be higher than in the other groups during the early growing period which is $0.70m^2/pig$ and similar to that recommended by National Livestock Research Institute, RDA.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.293-298
• /
• 2005

Lab scale experimental study was carried out for SBR process, to investigate the effects of influent ship sewage organic compound removal and Bacillus sp. state on design parameters. This process was able to remove nitrogen and phosphorus as well as organic matter efficiently. More than 95% of chemical oxygen demand(COD) were removed. In addition, about 97% of total nitrogen (T-N) was reduced. The total phosphorus(T-P) reduction averaged 93%. The performance load of SBR process was shown to be 0.095kg ${\cdot}$ TOC/$m^{3}$ ${\cdot}$ day. The pH was decreased from 8.1 to 7.0 within 30 min and increased to 7.3 at the end of anoxic stage, and these phenomena were explained. The sluge produced in the SBR process is characterized by low generation rate (about 0.36kg ${\cdot}$ MLSS/kg ${\cdot}$ TOC) and excellent settleability. The number of Bacillus sp. in the SBR was 24.2%, indicating that Bacillus sp. was a predominant species in the reactor.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.3
• /
• pp.21-30
• /
• 2014

Waste landfill site which is the facility usually rejected by communities is generally perceived as one of the serious social problems. It causes serious conflicts between interested parties from the beginning of the site selection process and produces various difficulties throughout the installation process. This study suggests the systematization and standardization of the landfill site selection process to reduce those problems and to objectify the process. The study process and results are as follows. First, the landfill site selection process was divided into 4 general phases rather than more specific fragmented phases and the requirements for each phase were suggested accordingly. This can make the process clearly organized and bring the standardization of the process by increasing the applicability of each phase for various situations. Second, the utilization of GIS(Geographic Information System) and PAPRIKA (Potentially All Pairwise RanKings of all possible Alternatives) among the various MCDA(Multi-Criteria Decision Analysis) methods was suggested as the objective and scientific method. Third, the hypothetical case study on the landfill site selection process of Cheongju city was conducted based on the information above and the results show the practicability and objectivity of the newly defined landfill site selection process in this study.

• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.475-480
• /
• 2005

Lab scale experimental study was carried out for SBR process, to investigate the effects of influent ship sewage organic compound removal and Bacillus sp. state on design parameters. This process was able to remove nitrogen and phosphorus as well as organic matter efficiently. More than $92.0\%$ of chemical oxygen demand(COD) were removed. In addition, about $84.0\%$ of total nitrogen (T-N) was reduced. The total phosphorus(T-P) reduction averaged $93\%$. The performance load of SBR process was shown to be $0.095kg{\cdot}TOC/m3{\cdot}day$. The pH was decreased from 8.1 to 7.0 within 30 min and increased to 7.3 at the end of anoxic stage, and these phenomena were explained. The sludge produced in the SBR process is characterized by low generation rate (about $0.36kg{\cdot}MLSS/kg{\cdot}TOC$) and excellent settleability. The number of Bacillus sp. in the SBR was $24.2\%$, indicating that Bacillus sp. was a predominant species in the reactor.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.274-277
• /
• 2006

The EAC(Estimate at Completion) among existing methods, which estimate cost and time effectively, help managers anticipate changeable several results at the point of $15{\sim}30%$ in the project progress. However, this method may cause such some problems as not to consider the periodically changing circumstances caused by construction risks or uncertainties which can affect the cost and time in the project, and to regard collected and accumulated data only as a single value when predicting the results on the progress. Accordingly, it is very difficult to accept the even small range of variability based on the anticipation of EAC. Consequently, the study focuses on the possibility methodology to anticipate time and cost accurately on the way to utilize EVMS(Earned Value Management System), and also suggest the way to perform the right estimation of EAC as considering various risks and uncertainties in construction projects.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.5 no.2
• /
• pp.29-37
• /
• 1997

Because food waste have high moisture content, landfill or incineration is not most suitable. The reuse of food waste by composting contribute to solve resourse, environmental, aglicultural problems. The purpose of this research is to optimise operating conditions and to develop new microorganisms for recycling of food waste by ultilizing small-scale composting equipment. The reduction rate of food waste was 75~85% by weight, and it was coincided with moisture reduction. When initial moisture was 25%, 45% and 60%, C/N ratio on based net weight was 9.8, 10.7 and 11. 8, respectively. And it was suitable for composting. But, The developed microorganism, PNU2, was better than existing commercial seed in the activity based on $CO_2$ concentration.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.277-287
• /
• 2022

ZEB is a building that increases the energy independence of the building itself, and new and renewable elements that can produce energy are essential, and BIPV is the most notable technology. In ZEB's design, BIPV should be planned early in the design, but BIPV plans are insufficient in the early stages. Therefore, this study derived elements for theoretical consideration of BIM and ZEB and analysis of ZEB independence rate based on BIM, a convergence design technology, and analyzed BIPV energy production and building energy consumption. Finally, by calculating the energy independence rate and reviewing the rating criteria in the project model, a basic research method for calculating the energy independence rate of ZEB at the beginning of the design was presented. Through this, it is expected that design productivity can be improved by supporting the decision of ZEB subjects.

• Restorative Dentistry and Endodontics
• /
• v.33 no.5
• /
• pp.435-442
• /
• 2008

Type II root canal was defined that two canals leave the chamber and merge to form a single canal at short of the apex. The aim of this study was to analyse the master apical file (MAF) size according to various instrumentation techniques in the type II root canal when each canal was enlarged to working length. Eighty mesial roots of molar with ISO #15 initial apical file (IAF) size in type II root canals were randomly divided into four experimental groups with 20 teeth each. According to enlarging instruments, four groups are: K-$FLEXOFILE^{(R)}$ (KF), engine-driven Ni-Ti $P_{RO}T_{APER}{^{(R)}}$ (PT), HERO $Shaper^{(R)}$ (HS), $K^{3\;TM}$ (K3). All canals were enlarged to each working length with ISO #30 size: #30 in KF, F3 in PT, .04/30 in HS, and .06/30 in K3. The master apical file (MAF) size was confirmed by tactile sensation and universal test- ing machine (EZ test, Shimadzu Co., Kyoto, Japan). The mean MAF size was statistically compared using one-way ANOVA and Tukey HSD test at the 0.05 probability level. These results show that the MAF size was appeared one or two sizes larger than the final enlarging instrument when all canal in type II configuration were enlarged to each working length. Therefore, the clinician have to confirm the apical stop once more after instrumentation of type II root canal.

• Analytical Science and Technology
• /
• v.18 no.2
• /
• pp.154-162
• /
• 2005

Recently, 1,4-Dioxane is known as the contaminant in water plants in Korea. Owing to its toxicity and potential health effect, 1,4-Dioxane must be determined at very low levels in drinking water. Studies on the removal of 1,4-Dioxane in drinking water were performed by using multi filtration system with activated carbons and membrane filter. For extraction of 1,4-Dioxane, methyl-t-butyl ether (MTBE) was used and then analyzed using gas chromatography-mass selective detection (GC/MSD). Removal experiment was proceeded for 300 L with a sample volume of 30 L. At first. The removal was 70%, 95% and 100% after using activated carbon, membrane and second activated carbon respectively. At larger accumulated water fluxes, the removal rate decreased at each filter. After the flow volume was 300 L, the removal rate was 30%, 88% and 99% through the first activated carbon, membrane and second activated carbon respectively.