• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.5
• /
• pp.1066-1072
• /
• 2005

The effects of La concentration in PLZT (z/30/70) thin film prepared by sol-gel method are investigated for the NVFRAM application. As the La concentration increases, the dielectric constants at 10 kHz increase from 450 to 600, while the loss tangent and the leakage current density at 100 kV/cm decrease from 0.075 to 0.025 and from $5.83{\times}10^{-7}\;to\;1.38{\times}10^{-7}\;A/cm^2,$ respectively. In the results of hysteresis loops measured at 175 kV/cm, the remanent polarization and the coercive field decrease from 20.8 to $10.5{\mu}C/cm^2$ and from 54.48 to 32.12 kV/cm, respectively, with the increase of La concentration from 0 to $10mol\%.$ After applying for $10^9$ cycles of square pulses with ${\pm}5V$ height, the remanent polarization of the PLZT (10/30/70) thin film decreases $40\%$ from the initial state, while that of the PLZT (10/30/70) thin film decreases $64\%.$.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.294-299
• /
• 2001

Effects of the surface fluorination on the electrochemical charge-discharge properties of $Mg_2$Ni electrode in Ni-MH batteries fabricated by mechanical alloying were investigated. After 20h ball milling, Mg and Ni powder formed nanocrystalline $Mg_2$Ni. Discharge capacity of this alloy increased greatly at first one cycle, but due to the formation of Mg(OH)$_2$ passive layer, it showed a rapid degradation in alkaline solution within 10cyc1es. In case of 6N KOH +xN KF electrolyte (x = 0.5, 1, 2), a continuous and stable fluorinated layer formed by adding excess F$^{[-10]}$ ion, increased durability of $Mg_2$Ni electrode greatly and high rate discharge capability(90-100mAh/g). 2N KF addition led to the highest durability of all tested here. The reason of the improvement is due to thin MgF$_2$, which can prevent the $Mg_2$Ni electrode from forming Mg(OH)$_2$layer that is the main cause of degradation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.4
• /
• pp.519-523
• /
• 2005

Soybean paste (Doenjang) was prepared by adding Lotus root powder (LRP) at $5\~15\%$ (w/w) to improve quality of the Doenjang and to give some functional properties. Moisture content was ranged about $50.05\~54.04\%$ and amino nitrogen content was $635\~648\;mg\%$ following the LRP contents. Crude protein amounts were $11.55\~12.56\%$ that was no difference between test samples. Carbohydrates contents increased $1.5\~2$ times in the test samples than the control depending on the LRP contents. However, contents of crude lipid $(6.99\~8.55\%)$ and ash $(13.99\~15.17\%)$ were decreased as increased the amounts of LRP. The pH of the product was decreased until 45 days during aging period and then slightly increased without significantly differences among test samples. The values of acidity were $1.85\~2.18\%$ at the early stage of aging but slightly increased with further aging. The total phenolic content in the Doenjang adding $15\%$ LRP was $461.8\;mg\%$ which is higher than $368.6\;mg\%$ in the control. Doenjang prepared with LRP showed an anti-browning effect of the product itself.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6C
• /
• pp.251-258
• /
• 2011

Steel pipe piles have been used as various deep foundation materials for a long time. Recent increase in steel material cost has made engineers reluctant in using it even with its good quality and ease of construction. Therefore when constructing with steel pipe pile, the decision to reuse the excessive pile length that is cut off from the designed pile head elevation after pile driving can be cost saving. This has caused many constructors to reuse the pile leftovers with new piles, but the absence of quantitative structural capacity behaviors of steel pipe pile after pile driving or appropriate countermeasures and standards in reusing steel pipe pile has resulted in wrong applications, pile structural integrity problems, inappropriate limitation of reusable pile length, etc. The structural performance analysis between a new pile and a pile that has undergone working state and ultimate state stress level during pile driving was performed in this research by means of comparing the results between the dynamic pile load test, tensile load test, charpy energy test and fatigue test for high strength steel of $440N/mm^2$ yield strength. Test results show that under working load conditions the yield strength variation is less than 2% and for ultimate load conditions the variation is less than 5% for maximum total blow count of 3000. The results have been statistically analyzed to check the sensitivity of each factors involved. From the test results, reusability of steel pipe pile lies not in the main pipe yield strength deviation but in the reduction of absorb energy, strength changes and quality control at the welded section, shape deformation and local buckling during pile driving.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.12 no.2
• /
• pp.215-220
• /
• 2009

Purpose: Recently, the favorable merits of breast feeding have received widespread attention and the number of breast feeding children is increasing. We investigated the weaning practices between breast feeding infants and non-breast feeding infants with respect to iron deficiency anemia (IDA). Methods: Between March 2006 and January 2009, we surveyed 70 parents, the children of whom had been medically diagnosed with IDA, and 140 parents, the children of whom did not have IDA, about how they feed their children and how much they know about the weaning process. The infants and children were 6∼36 months of age and attended the Inha University hospital. Results: IDA patients started weaning later than non-IDA patients. Also, breast feeding in IDA patients was more frequent than in non-IDA patients (82% vs. 30%). The breast feeding group began weaning at approximately 6.4 months of age, which was statistically meaningfully compared to non-breast feeding infants. There were no differences in knowledge between the two groups of parents. Conclusion: According to our research, we assume that if weaning begins at 6 months, we cannot supply sufficient iron to meet the infant's needs, which increase sharply around 6 months of age because of depletion of stored iron. Thus, infants need to initiate weaning from breast feeding at 4 months of age to furnish an ample amount of iron or take iron-containing supplements. These methods would be expected to prevent IDA in breast feeding infants.

• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.49-61
• /
• 2006

This study suggests long-life asphalt pavement method which can save maintenance cost by increasing the design and performance period of pavements. The high modulus asphalt binder developed and then various physical tests are performed. Laboratory performance tests and accelerated pavement test are conducted for the high modulus and conventional mixtures. The test results show that dynamic modulus values of high modulus mixtures are higher than those of the conventional mixtures, The high modulus mixtures yield better fatigue, rutting and moisture damage performance than conventional mixtures. Structural analysis is performed and a database is built up for long life asphalt pavement design. Pavement response model is developed through a multiple regression analysis program, SPSS using the database. A design software for the long life pavements is developed based on the pavement response model and laboratory and field performance tests results. In addition, optimum pavement sections and materials are suggested. The suggested AC thickness of long life asphalt pavement is 29cm. A Life cycle cost analysis(LCCA) is conducted to check the economical efficiency of the long life pavement section. The LCCA result shows that initial construction costs of long life and conventional pavements are almost equal, but long life pavement is more profitable in terms of the LCCA.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.5
• /
• pp.303-311
• /
• 2016

From having an experimental study of physical and consolidation characteristics of soft clay in Nakdong river lower basin, we come to the conclusion as follow. Clay minerals in Nakdong river lower basin are classified into Kaolinite and Illite. Water content($W_n$) is similarly distributed in a range of 50.4% to 92.8% in Noksan and 46.6% to 99.0% in Jangyu, and liquid limit(LL) of both areas appears lower than water content. In the case of compression index, the index of jangyu is a little higher than that of Noksan because Jangyu is in a range of 0.67 to 1.94 and Noksan in a range of 0.44 to 1.5. The second compression index of Jangyu in a range of 0.027 to 0.092 is also higher than Noksan in a range of 0.024 to 0.075. As a result of regression analysis, a relation between water content and compression index is linear, and between initial void ratio and compression index is shown to $C_c=0.80e_o-0.58$. The ratio of $C_{\alpha}/C_c$ in a range of 0.03 to 0.08 expresses a wide range.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.4
• /
• pp.288-293
• /
• 2015

BACKGROUND: This study was conducted to investigate the effect of the unexpected early loss of leaves on a newly-bred kiwifruit on the regrowth of axillary buds the current season and the early growth and development the following year.METHODS AND RESULTS: The vines were defoliated on Jul. 18, Aug. 16, and Sep. 17 in 2012 and on Jul. 16, Aug. 13, and Sep. 12 in 2013. The vines were defoliated 0 (control), 50, and 100% of the total number of leaves on a vine. The regrowth of axillary buds at 30 days after defoliation increased in proportion to defoliation degrees regardless of the defoliated time. Defoliation the previous season did not influence percent budbreak the next season. Percentage of floral shoots of the control vines was 27.4%, each bearing 2-3 flowers. In those vines defoliated 100% in August and September, however, percent floral shoots and number of flowers significantly reduced.CONCLUSION(S): Defoliation in July, August, and September didnot affect percent budbreak the following year regardless of degrees of defoliation. A 100% defoliation in August and September significantly reduced flowering the following year compared to the control; that in August resulted in no floral buds at all.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.129-139
• /
• 2004

During the construction of circular underground pipe, the non-proper compaction along the pipe and the decrease of compaction efficiency have been the main problems to induce the failure of underground pipe or facility. The use of CLSM (controlled low strength materials) should be one of the possible applications to overcome those problems. In this research, the small-scaled model test and the numeric analysis using PENTAGON-3D FEM program were carried out for three different cases on the change of backfill materials, including the common sand, the soil from construction site, and the CLSM.. From the model test in the lab, it was found out that the use of CLSM as backfill materials reduced the vertical and lateral deformation of the pipe, as well as the deformation of the gound surface. The main reason for reducing the deformation would be the characteristics of the CLSM, especially self-leveling and self-hardening properties. The measured earth pressure at the surround of the corrugated pipe using the CLSM backfills was smaller than those in the other cases, and the absolute value was almost zero. Judging from the small-scaled model test and FEM analysis, the use of CLSM as backfill materials should be one of the best choices reducing failure of the underground pipes.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.567-572
• /
• 1994

Diglyceride was prepared by reaction of hydrogenated beef tallow and glycerol (GL) in the presence of a Pseudomonas lipase. Both substrates were mixed at the ratio of GL/Triglyceride of 0.5 which is the stoichiometric molar ratio for the complete conversion of triglyceride (TG) to diglyceride (DG). DG can be obtained by solid phase-glycerolysis of hydrogenated beef tallow without use of organic solvents or emulsifiers by careful control of reaction temperature. Optimized reaction temperature condition was as follows: An initial incubation at$60^{\circ}C$ for 2h followed by the first temperature shift down to $55^{\circ}C$ for 4h, and then the second shift down to $50^{\circ}C$ for up to 3 days. There was a large decrease in the content of TG during the first $60^{\circ}C$ incubation for 2h. Even a prolonged incubation at $60^{\circ}C$ could not make a change of the composition of the reaction mixture at liquid state. By controlling the temperature lower than $60^{\circ}C$, reaction mixtures were solidified. The reaction temperature at $50^{\circ}C$ below the melting temperature of hydrogenaed beef tallow gave an 71% optimum yield of DG after 72h enzymatic glycerolysis and about 73% of total DG was 1,3-DG.