• Geophysics and Geophysical Exploration
• /
• v.4 no.3
• /
• pp.84-88
• /
• 2001

For the elastic migation, the velocity errors between the initial velocity model and true velocity model seriously affect the migrated images. The assumption of an initial velocity model, thus, is one of the critical factor for the successful migration. In case of applying the layered earth model as an initial velocity model, the layer boundary having large velocity contrast can not be defined well with conventional traveltime calculation algolithms and we have the difficulties for expressing the characteristics of the real subsurface. Smooth Background Model (SBM) we have applied as an initial velocity model in our study is characterized to be linearly varying the velocity with the depth, which can express the velocity variation in the subsurface properly. Thus it can properly be applied to traveltime calculation algolithms such as Vidale's method. In this study, Kirchhoff operator for prestack migration was used and the absolute amplitude obtained by modeling was applied as a weighted value to consider the true amplitude for initial model. Initial velocity model for migration was determined by using stacking velocity and we applied this model to real data.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.41-48
• /
• 2008

The required energy for the heat treatment of pine log was evaluated in this study. A proper heat treatment of pine log infected by pinewood nematode (Bursaphelenchus xylophilus) can prevent spreading of the infection by pinewood nematode and make the infected pinewood valuable again. The FAO (Food and Agriculture Organization of the United Nations) heat treatment standard for various types of infected wood for which a heat treatment of the core part of the wood is necessary is 30 minutes at $56^{\circ}C$, taking into account the international standards for phytosanitary measures (ISPM No. 15). In this study, the energy consumption during the heat treatment was separated into two kinds of energy, initial energy for heating kiln drier and to reach set point temperature and relative humidity and the required energy supplementing heat loss. The initial required energy per unit time is greater than that during the treatment. The energy consumption per unit time varied little during the heat treatment. As a result, the set point relative humidity with set dry bulb temperature and density of wood dependent on moisture content are very important factors to change energy consumption in the experiment. The heat treatment at higher temperature and higher humidity levels requires more energy consumption but less treatment time. It is expected that a more effective energy program could be planed for the heat treatment of pine log through this study.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.7
• /
• pp.1-8
• /
• 2011

Vehicular Ad-hoc Network (VANET) is a special form of Mobile Ad-hoc Network designed to provide communications among nearby vehicles without communications infrastructure. Some characteristics in VANET environment such as high mobility, dynamic topology and selfishness of nodes can cause degradation of network quality. In this paper, we propose an adaptive incentive/topology control scheme to improve network quality in VANET by stimulating real time data forwarding and reporting changes of network topology. In the proposed scheme, an incentive suggested by the source node is updated in real time simultaneously with data transmission to stimulate real time data forwarding. In addition, when the order of the nodes in the path is changed, nodes which report the changes of network topology will get an additional incentive. By computer simulation, it is shown that the proposed incentive/topology control scheme outperforms the conventional schemes with respect to data delivery time and data delivery ratio.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.1
• /
• pp.1-8
• /
• 2010

Some methods employing the Active Contour Model have been widely used to extract face contour. Their performance, however, depends on the initial position of the model and the coefficients of the energy function which should be reconsidered whenever illumination and environmental condition of an input image is changed. Additionally, the number of points in the contour model should increase drastically in order to extract a fine contour. In this paper, we thus propose a novel approach which extracts face contour by segmenting the face region with threshold values obtained by a histogram analysis technique in the separated region of input image. The proposed method shows good performance under various illumination and environmental condition since it extracts face contour by considering the characteristics of the input image.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.210-210
• /
• 2021

Delft Dashboard는 유동모델을 위한 오픈소스 프로그램으로 로컬 및 글로벌 데이터 세트를 사용하여 다수의 입력 매개변수를 신속하게 생성, 편집하고 모델 내 입력을 시각화하도록 설계된 그래픽 사용자 인터페이스(GUI) 이다. 특히 Delft Dashboard에 제공하는 개방경계조건을 이용하면 격자영역을 인식하여 개방경계를 자동으로 분배 및 지정하고, 각 개방경계 위치에서 분조별 조석조화상수 값도 산출되므로 유동 모델의 편의성을 증대시킬 수 있지만 상황에 따라 적합하게 경계를 분배하여 개방경계로 지정하는 것이 중요하다. 본 연구에서는 Delft Dashboard에서 제공하는 개방경계조건 중 TPXO 8.0을 이용한 Delft-3D 해수유동 수치모의를 수행하여 개방경계조건이 결과에 미치는 영향을 분석하였다. TPXO 8.0의 경우 격자영역에서 개방경계조건을 설정할 때 사용자가 경계조건에 포함될 격자 수를 지정하면 전체 격자경계에서 격자 수에 해당하는 만큼 경계를 나누어 개방경계를 지정하고 각 개방경계 위치에서의 분조별 조석조화상수값을 산출한다. 특히 격자 수에 따라 개방경계로 지정되는 정도에 따른 영향을 분석하기 위하여 인위적으로 경계를 다양하게 분배하여 개방경계를 지정한 후 수치모의에 적용하였다. 수치모의는 동해안 고리원전 인근을 대상으로 격자 생성 후 Delft Dashboard TPXO 8.0을 이용하여 전술된대로 다양한 개방경계조건을 생성하였고 이를 Delft-3D내 적용하여 해수유동 모의를 수행하였다. 각 개방경계 조건별 초기 수면 변위 분석 및 인근 조위관측소의 관측값의 비교를 통해 개방경계조건이 모의결과에 미치는 영향을 분석하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.3
• /
• pp.247-250
• /
• 1984

As a consecutive work on stability for the quality of ginseng products, the sorption properties of red ginseng (RG), red ginseng powder (RGP), and red ginseng powder tablet (RGPT) were studied in order to set the optimum moisture level for them. The levels of moisture at BET monolayer of RGP and RGPT ranged 5.97 to 7.27 % and 4.73 to 5.14 % in wet basis, respectively. Based on these values, the optimum moisture content for both of them would preferably be set at $6.7{\pm}0.7%$ and $4.9{\pm}0.2%$. From the results of storage study on microorganism growth under the maltreated condition, $40^{\circ}C$, and 75% RH, the optimum level of moisture for RG could be extended up to $14.0{\pm}0.5%$, which is much higher than the circulating values of 10.416%.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.139-145
• /
• 2012

Generally, Quicksort selects the pivot from leftmost, rightmost, middle, or random location in the array. This paper suggests Quicksort using middle range pivot $P_0$ and continually divides into 2. This method searches the minimum value $L$ and maximum value $H$ in the length n of list $A$. Then compute the initial pivot key $P_0=(H+L)/2$ and swaps $a[i]{\geq}P_0$,$a[j]<P_0$ until $i$=$j$ or $i$>$j$. After the swap, the length of list $A_0$ separates in two lists $a[1]{\leq}A_1{\leq}a[j]$ and $a[i]{\leq}A_2{\leq}a[n]$ and the pivot values are selected by $P_1=P_0/2$, $P_2=P_0+P_1$. This process repeated until the length of partial list is two. At the length of list is two and $a$[1]>$a$[2], swaps as $a[1]{\leftrightarrow}a[2]$. This method is simpler pivot key process than Quicksort and improved the worst-case computational complexity $O(n^2)$ to $O(n{\log}n)$.

• Journal of Service Research and Studies
• /
• v.11 no.2
• /
• pp.118-130
• /
• 2021

This study designs and validates a greenhouse complex environmental control algorithm with a multi-phase processing scheme that can combine and control actuators according to the degree of change in the greenhouse environment. The composite environmental control system is a system in which the complex environmental controller analyzes the information detected by sensors and operates appropriately actuators to maintain the crop growth environment. A composite environmental controller directs control devices driving actuators through a composite environmental control algorithm, which calculates the values necessary for the operation of the control devices. Most existing algorithms carry out control procedures on a single phase by iteration cycle, which can cause abnormal changes in the greenhouse environment due to errors in output. The proposed algorithm distributes control procedures over multiple phases: environmental control, environmental control, and device operation, and every iteration cycle, detects environmental changes in the environmental control phase first, and then combines control devices that can control the environment in the environmental control phase, and finally, performs the controls to derive the actuators in the device operation phase. The proposed algorithm is designed based on the analysis of the relationship between greenhouse environmental elements and control devices deriving actuators. According to verification analysis, the multi-phase processing scheme provides room to modify or supplement the setting value and enables the control devices to reflect changes in the associated environmental components.

• The Korean Journal of Applied Statistics
• /
• v.5 no.2
• /
• pp.193-209
• /
• 1992

We consider a Step Life Testing which is deviced for a two-component serial system with the considerably long life time. In the modelling stage we discuss the bivariate exponential distribution suggested by Block and Basu as the bivariate survival function for the two-component system, and develope the cumulative exposure model introduced by Nelson so that it can be used under the bivariate function. We consider inference on the component life time when the components are at work in the system by combining the information from system life test and that from the component tests carried out separately under the controlled environment. In data analysis, maximum likelihood estimators are discussed with the initial value obtained by an weighted least square method. Finally we discuss the optimal time for changing the stress in the simple step stress life testing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.3
• /
• pp.535-544
• /
• 2023

In this paper, we study the effect of gradient vector calculation method(analytical method, central finite difference method) on adaptive beamforming to control weight distribution during iterated calculation when LMS algorithm (repeating method) is used to realize desired beam pattern. To this end, a quasi-ideal beam having an arbitrarily set beam width, a rotating beam, and a multi-beam were reviewed as examples. Numerical experiments applied the step parameters of the appropriate values to the adaptive beamforming system through trial and error equally to the two calculations, and compared the convergence characteristics of objective functions that evaluate adaptability and error using two methods for calculating gradient vectors.