• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.83-91
• /
• 2015

Under impact or blast loads, concrete behaves with different mechanical properties comparing to the static loading conditions. In other words, with high strain rate, mechanical properties of concrete vary significantly. To evaluate the compressive characteristics of concrete with high strain rate, SHPB(Split Hopkinson Pressure Bar) test is typically used. However, because SHPB test method has been developed for metallic materials, it is necessary to verify the applicability of SHPB for brittle materials such as concrete. Also, there have been little researches on the evaluations of mechanical characteristics of UHPC under high strain rate conditions. This study has been performed to evaluate and analyse the compressive characteristics of plain concrete and UHPC with SHPB test apparatus. Also, to verify the applicability of SHPB test for concrete, direct displacement image analysis with high speed camera was performed for the comparisons with analytical solutions for SHPB test.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.5
• /
• pp.449-453
• /
• 2015

Recently, surfaces with micro and nano structures are the focus of various research and engineering fields to enhance wetting characteristics of the surfaces. Hydrophilic surfaces with hierarchical structures are generally characterized by the interfacial behavior of water droplets. In this study, the interfacial behavior of water droplets is experimentally investigated considering the scale of structures. Using the dry etching and conventional lithography method, quantitative hierarchical structured surfaces are developed. The behavior of the liquid-vapor interface on the test sections is visualized using an automatic goniometer and a high-speed camera. On the basis of the visualized data, the interfacial behavior of water droplets is intensively investigated according to surface geometrical characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.535-540
• /
• 2014

Due to the recent popularity of sports, business items which combine IT technologies with sports have appeared. 'Sportainment' which combines the elements of sports and entertainment have a lot of potential and development as new business items in the view of overcoming many limitations such as time and place in real sports. For suggesting a baseball simulation game 'sportainment', this paper is to review the technologies in the existing indoor baseball ranges and to provide the possibility of indoor baseball simulation using various sensor technologies. This baseball simulation game is expected to develop as one of successful indoor 'sportainment' businesses such as Golfzon.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.511-511
• /
• 2017

하천에서 홍수 예방 및 가뭄재해 방지를 목적으로 최근 4대강 살리기 사업이 수행되었다. 특히, 안정적인 용수공급 및 다양한 수재해 피해를 최소화하기위해 다기능보가 설치되었다. 설치된 보는 고정보와 가동보로 구분되며 평상시에는 고정보를 넘어가는 월류흐름이 발생하며 홍수 시에는 추가적으로 가동보를 개방하여 오리피스 흐름이 발생한다. 최근 기후변화로 인해 집중호우가 빈번히 발생하며 이는 보 주변에서 빠르고 복잡한 흐름을 유발하게 된다. 이러한 흐름특성은 보하류의 세굴문제뿐만 아니라 물받이와 바닥보호공의 안전성에 영향을 미칠 수 있다. 본 연구에서는 영상기법을 활용하여 도수가 발생하는 조건에서 고정보 하류의 물받이공 및 바닥보호공에 난류흐름특성 및 압력분포를 분석하였다. 길이 8.0 m, 폭 0.3 m를 갖는 개수로에서 실험을 수행하였으며 0.2 m 높이의 고정보는 상류경계로부터 3.0 m지점에 위치하였다. 보 하류부에서 유속성분은 비접촉식 유속측정 기법인 입자영상유속계(Particle Image velocimetry, PIV)와 기포흐름을 측정할 수 있는 기포영상유속계(Bubble Image velocimetry, BIV)를 적용하였다. 그러므로 기포 존재유무와 관계없이 보 하류부 구간에 대한 유속장 성분을 취득하였다. 도수흐름은 물받이공 및 바닥보호공 영역의 바닥면을 따라 빠른 유속을 갖는 제트류가 발생하고 수면과 바닥으로 강한 진동이 발생하여 불안정한 흐름이 야기된다. 바닥면에 작용하는 압력을 측정하기 위해 흐름방향을 따라 피에조미터를 설치하였고 압력수두 분포를 초고속카메라로 촬영하여 그 특성을 분석하였다. 실험을 결과를 통해 보 하류부에 영향을 미치는 인자를 도출하였으며 향후 보 설계기준에 반영할 수 있을 것으로 기대된다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.4
• /
• pp.68-76
• /
• 2016

This research is carried out for the performance evaluation of the injector that is one of the critical components of bipropellant-rocket-engine. Spray characteristics are investigated in detail according to the recess length and injection pressure on the swirl-coaxial-injector using gaseous methane and liquid oxygen as propellants. A visualization is conducted by the Schlieren photography that is composed of a light source, concave mirrors, knife, and high-speed-camera. A hollow-cone-shape is identified in the liquid spray that is spread only by inner injector and the spray angle is decreased due to the diminution of swirl strength in accordance with the increase of the length of injector orifice. When the injector sprays the liquid through the inner injector with the aid of gas through the outer injector, the spray angle in external mixing region tends to increase with rise of the recess length, while in internal mixing region, it is decreased. It is also confirmed that the same tendency of the spray angle with recess length appears irrespective of the injection pressure of liquid spray.

• Composites Research
• /
• v.35 no.1
• /
• pp.38-41
• /
• 2022

In this study, the strain rate dependent tensile and compressive properties of PP-LGF and TPO was investigated under the high strain rate by using the Split Hopkinson Pressure Bar (SHPB). The SHPB is the most widely used apparatus to characterize dynamic mechanical behavior of materials at high strain rates between 100 s^-1 and 10,000 s^-1. The SHPB test is based on the wave propagation theory which was developed to give the stress, strain and strain rate in the specimen using the strains measured in the incident and transmission bars. In addition, to verify the strain data obtained from SHPB, the specimen was photographed with a high-speed camera and compared with the strain data obtained through the Digital Image Correlation (DIC).

• Composites Research
• /
• v.35 no.3
• /
• pp.196-200
• /
• 2022

Split Hopkinson Pressure Bar (SHPB) is a general test equipment for measuring the mechanical properties of high modulus metal and composite materials at high strain rate. However, for the soft plastic material, it is difficult to hold the specimen and achieve dynamic stress equilibrium due to the weak transmitted signals. In this study, SHPB test apparatus were designed to measure accurately the high strain rate stress-strain curve of the soft plastic materials by changing the incident bar materials and the shape of the specimen holder parts. In addition, to verify the high strain-rate tensile strain data obtained from SHPB, the strain distribution of the specimen was measured and analyzed with a high-speed camera and the digital image correlation (DIC), which was compared with the strain history measured from SHPB.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.681-687
• /
• 2014

The objective of this work presented here was focused on analysis of in-cylinder combustion characteristic, engine performance, and nitrogen oxides emission characteristic from marine gas oil for propulsion diesel engine of naval vessels and biodiesel with fuel injection timing in a single cylinder diesel engine. In addition, combustion process was analyzed with a high speed camera of marine gas oil and biodiesel fuel. Retarding the fuel injection timing from $BTDC25^{\circ}CA$ to $BTDC5^{\circ}CA$, in cylinder peak combustion pressure was gradually decreased, however, engine torque showed a tendency to increase. The highest nitrogen oxides level was measured at $BTDC15^{\circ}CA$, they were reduced at retarded and advanced condition on the basis of $BTDC15^{\circ}CA$. Comparing with combustion process of marine gas oil and biodiesel fuel at $BTDC5^{\circ}CA$, self-ignition timing of biodiesel fuel included oxygen content was faster than marine gas oil, however, a cautious observation indicates a slightly higher flame intensity for marin gas oil than biodiesel as a diffusion flame is developing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2054-2060
• /
• 2011

The purpose of this paper is to investigate spray characteristics of GDI injector that is economic and environment-friendly. Injector characteristics such as penetration length, spray angle and mixture formation were measured using experimental visualization technique. Especially, it has been analyzed that the influences of ambient pressure and injection pressure on penetration length and spray angle. To visualize the spray, a constant volume combustion chamber and fuel supply system have been manufactured. A high-speed camera and LED light source have been applied to obtain spray images. The experimental and visualization result shows that the penetration length is increased as decreasing ambient pressure and/or increasing injection pressure. Also, ambient pressure and injection pressure have minor effect on the spray angle variation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.8
• /
• pp.619-626
• /
• 2017

In this work, the effect of attitude angle variation on drag coefficients of hemisphere in a Mach 6 flow has been investigated. Experiments were conducted in a shock tunnel and a free-falling technique was used to minimize flow disturbance by a sting. For attitude and drag coefficient measurements of a free-falling hemisphere, a free-falling technique based on a releasing mechanism with a stair-typed module and an electromagnet was developed. A shadowgraph technique was used for flow visualization using a high-speed camera.