• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.87-96
• /
• 2019

Recently, with the rapid development of video equipment and technology, tremendous video information is produced and utilized in military domain to acquire battlefield information or for effective command control. Note that the video playback devices currently used in the military domain ranges from low-performance tactical multi-functional terminals (TMFT) to high-performance video servers and the networks where the video information is transmitted also range from the low speed tactical information and communication network (TICN) to ultra-high speed defense broadband converged networks such as M-BcN. Therefore, there is a need for an efficient streaming technique that can efficiently transmit defense video information in heterogeneous communication equipment and network environments. To solve the problem, this paper proposes a Scalable Video Coding (SVC) and balanced selection algorithm based Peer-to-Peer (P2P) streaming technique and the feasibility of the proposed technique is verified by simulations. The simulation results based on our BitTorrent simulator show that the proposed balanced selection scheme outperforms the sequential or rarest selection algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.240-248
• /
• 2001

This paper describes the design of a space-division switch which can support a self-healing operation of 2-fiber bidirectional line switched ring in 2.5Gb/s SDH-based transmission system. The switch having a 1.25Gb/s throughput has been designed and implemented with COMPASS tool and 0.87$\mu\textrm{m}$ CMOS gate-array. The proposed switch is suitable for the quickly self-healing operations when a failure occurs in a 2-fiber bidirectional switched ring composed of ADM transmission systems. The switch is composed of an add/drop control part, a cross-point switch, a frame-phase aligner, processor interface and an unequipped data framer. The test results of the switch adapted to 2.SGb/s SDH-based transmission system, show immediate restoration when a failure occurs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.2
• /
• pp.347-356
• /
• 2000

This paper was studied on influence analysis of Telecommunications Network in Electronic Government. Analysis method was studied of Policy Delphi. The five kinds of telecommunications network influence in Electronic Government is National Information Infrastructure Networt, Local Area Network, Integrated Services Digital Network Public Switched Telephone Network, and Cable TV Network. The five kinds of telecommunications network service influence in Electronic Government is Telecommuting Service, Internet Service, PC Telecommunications Networt Video Conference Service and Electronic Data Interchange Service. The five kinds of telecommunications influence in Electronic Government is as follow: First Telecommuting Service must be Constructed. Second, Public Administration Service must be improved. Third. citizen must be participated in decision making. Fourth, Public Administration duty service must be digitalizing. Fifth, Video Conference Service must be improved.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.453-462
• /
• 2003

IP address lookup of router searches and decide proper output link using destination address of IP packet that arrie into router. The IP address lookup is essential part in te development of high-speed router needed to high-speed backbone network as one of bottleneck of router performance. This paper introduces DTC data structure that can support gigabit IP address lookup by dynamic trie compression technique that just uses small memory in conventional Pentium CPU. When make a forwarding table by trie compression, the DTC can dynamically select a size of data structure with considering correlation between table's size and searching speed. Also, when compress the prefix trie, DTC makes IP address lookup on the forwarding table of a search on the high speed SRAM cache by minimizing the size of data structure reflecting the structure of the trie. In the experiment result, the DTC data structure recorded performance of maximum $12.5{\times}10^5$ LPS (lookup per second) in conventional Pentium CPU through a dynamic building of most suitable compression over variety of routing tables.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.15-22
• /
• 2004

This paper presents the channel analysis considering power distribution network(PDN) system of PCB. For achieve the target PDN system we proposed the useful design approach for acquiring the characteristic target of power distribution network in overall frequency ranges. The proposed method is based on the hierarchical approach related to frequency ranges and the path-based equivalent circuit model to consider the interference of the current paths between the decoupling capacitors and the board through it is a lumped model for fast and easy calculation, experimental results show that the proposed model is almost as precise as the numerical analysis. The analysis of PDN system shows that although the effective inductance of package dominatly affects the power noise and the signal transfer through data channel, the board PDNs also can not be neglected for achieving the accurate channel signaling. Therefore, we must design concurrently the chip, package, and board from the initial spec design of high speed digital system.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.6
• /
• pp.1-12
• /
• 1999

This paper illustrates and analyzes system structure, link budget and cell coverage to accommodate Korea environment about LMDS systems that are expected to play an important role as the future wireless infrastructure of the information superhighway. In the mean time, many parameters used for the analysis apply to the allocated frequency bandwidth (Up-stream : 24.25GHz-24.75GHz, Down-stream : 25.5GHz-27.5GHz) of Ministry of Information and Communication. The modem and channel coding must be developed to accommodate specifications of DAVIC protocol. The materials about atmospheric phenomena refer to apply specifications of ITU-R. This paper will be need to disign the network structure and system configuration of LMDS system.

• Proceedings of the Technology Innovation Conference
• /
• 2003.06a
• /
• pp.90-107
• /
• 2003

참여정부의 출범과 한께 과학기술계에서는 동북아 과학기술 허브 구축방안 논의가 활발히 진행되고 있으나, 현재까지 이러한 논의는 법제도의 정비 및 과학기술특구 건설 등의 이슈에 한정되고 있는 실정이며, 더욱이 이를 뒷받침할 실증적 연구는 미미하다. 허브란 개념이 네트워크에서의 중심성(centrality)을 의미 하며, 현재 및 미래의 과학학기술협력 네트워크 발전에 정보통신기술이 중요한 역할을 수행함을 고려할 때, 우리나라의 초고속통신망 인프라를 십분 활용한 차세대 과학기술 정보인프라의 구축을 통한 동북아 사이버 연구네트워크상의 허브화(궁극적으로는 e-Science의 허브화를 지향)는 지역 클러스터 건설을 통한 물리적 허브화 못지 않게 중요하다 하겠다. 본 연구는 먼저 네트워크 분석기법을 동아시아의 과학기술협력 네트워크에 적용하여 주요 네트워크 지수를 실증적으로 진단하고, 특히 이를 유럽연합의 과학기술협력 네트워크의 패턴과 비교 분석하였다. 유럽 연합은 1984년부터 과학기술 협력 프로그램인 Framework Program을 시작하여 일찍부터 역내 과학기술협력 프로그램을 운영해 온 경험을 가지고 있고, 2000년부터는 자발적 협력과 네트워킹을 통해 유럽의 연구 개발 활동을 통합·조정하기 위해 새롭게 제안된 유럽 연구개발권 (European Research Area) 형성이 구체화되고 있어, 동북아 과학기술협력 네트워크를 건설하는데 좋은 벤치마킹 대상이라 할 수 있다. 이 보고서에서는 유럽 연구개발귄이라는 우산 아래서 유럽의 과학기술 활동이 조정 및 통합되는 과정을 살펴보고, 이를 위한 과학기술 정보인프라의 주요 기능을 컨텐트 (연구정보서비스와 메타데이터 표준), 시스템 (슈퍼 컴퓨팅, 광대역 네트워크, GRID), e-Science 응용연구 별로 살펴보았다. 끝으로 유럽의 경험을: 교훈삼아 동북아 e-Science 네트워크의 건설을 위한 정책적 시사점과 동북아 연구개발정보 Portal 및 APEC APGrid 연구망 등의 구체적인 정보인프라 구축방안을 도출하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.51-58
• /
• 2002

In this paper, a 155/311 Mb/s MUX/DEMUX chip using ECL macrocell away has been developed with a single device. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s(or 311 Mb/s) serial data output, and is to interleave a serial input bit stream of 155 Mb/s(or 311 Mb/s) into the parallel output of 51 Mb/s. The input and output of the device ate TTL compatible at the low-speed end, but 100k ECL compatible at the high-speed end. The device has been fabricated with Motorola ETL3200 macrocell away The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 220ps at the high-speed end.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.243-248
• /
• 2003

This paper is contents on that construct ultra high speed wireless communication cell backbone net of city using of wireless communication transceiver for millimeter wave band. A new type of 60GHz wave band wireless transceiver using NRD waveguide. This 60GHz transceiver has excellent signal's absorption characteristics of oxygen molecule than the other millimeter wave bands. We constructed service networks to cell interval within about 500m to 3Km laying stress on wireless backbone node using 60GHz transceivers, and did it so that city type wireless communication cell backbone networks of 155.52Mbps ATM(OC-3) may be possible. The possible use of wireless backbone networks technology in a rainy day and a clear day was evaluated at 1Km data link distance. We can measured bit error rate(BER). BER is $10^{-11}$ at 155.52Mbps ATM(OC-3) in a clear day and $10^{-6}$ in a heavy rain more than 35mm per time. Also, we constructed wireless cell backbone networks distance to use several 60GHz transceivers and investigated data transmission rate between main center and local center of long distance. In proposed wireless cell backbone networks, the data throughput was approximately 80Mbit/sec. Therefore, if use transceiver, it is possible that city type ultra high speed wireless communication cell backbone networks construction of 100Mbps, 155.52Mbps, 622Mbps, 1Gbps and 1.2Gbps degrees.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.351-355
• /
• 2010

The service which is required wide bandwidth is growing in these days, so building up High Speed communication system is being required. The Task Force team of IEEE 802.3ah set the EPON as a standard; next generation subscriber access network. For offering a high quality service, 10G EPON that is changed from 1Gbps uplink downlink bandwidth to 10Gbps is come up. Although Kramer had studied 10G EPON there was a QoS limitation, when load is low, End-to-End maximum delay is increased. This paper is suggesting time synch ronization method, resource reservation method, band width allocation method. We confirmed that 10EPON was able to offer quality service by the result of the OPNET.