• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.176-183
• /
• 2020

The purpose of this study was to determine whether abdominal pressure belt has an immediate effect on pulmonary function, balance and gait ability for stroke patients. Twenty subjects measured pulmonary function and the COP, BBS, TUG, 10m walk test, and FGA prior to belt wearing. Immediately all subjects were post-tested after wearing abdominal pressure belt of elastic components. Except for forced vital capacity (FVC) and forced experimental volume in the 1 second (FEV1), there were significant differences after belt wearing. This study suggests that the application of abdominal pressure belt enhanced balance and gait ability. However, improving pulmonary function requires several efforts, such as changing the pressure level, posture.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.2 s.35
• /
• pp.149-154
• /
• 2005

We fabricated Ni/Co(or Co/Ni) composite silicide layers on the non-patterned wafers from Ni(20 nm)/Co(20 nm)/poly-Si(70 nm) structure by rapid thermal annealing of $700{\~}1100^{\circ}C$ for 40 seconds. The sheet resistance, cross-sectional microstructure, and surface roughness were investigated by a four point probe, a field emission scanning electron microscope, and a scanning probe microscope, respectively. The sheet resistance increased abruptly while thickness decreased as silicidation temperature increased. We propose that the poly silicon inversion due to fast metal diffusion lead to decrease silicide thickness. Our results imply that we should consider the serious inversion and fast transformation in designing and process f3r the nano-height fully cobalt nickel composite silicide gates.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.2
• /
• pp.136-141
• /
• 2000

This study was conducted to analyze the properties of the roasted dandelion tea prepared after various pre-treatments such as pre-drying, steaming and air blast drying. The dandelion tea was prepared by roasting the pre-treated dandelion leaves and its total yield, pH, soluble solid content, turbidity, browning and sensory value were evaluated. Total yield and soluble solid content were the highest in case of air blast drying. Turbidity and browning degree were similar in all the teas regardless of their pre-treatment including pre-drying, steaming or air blast drying. The best palatability in the sensory evaluation was obtained at the steaming condition for 60 sec without pre-drying. Longer air blast drying time resulted in the increase in the a and b values. turbidity, browning degree, total yield and soluble solid content in the air blast dried tea.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.781-785
• /
• 2011

In this work, a nano-sized samaria-doped ceria(SDC) was prepared by a urea-based hydrothermal method and characterized by XRD, FESEM and TEM. It was observed that the increase in synthesis time and temperature gave rise to crystallity and particles size. Moreover, the synthesised powders had a excellent ion-conductivity(0.1 S/cm at 600~$800^{\circ}C$) which is suitable for electrolyte of intermediate temperature-solid oxide fuel cell(IT-SOFC). Subsequently for use as electrolyte for anode-supported IT-SOFC, we tried to deposit the SDC powder on a porous NiO-SDC substrate by electrophoretic deposition(EPD) method. From the FESEM observation, a compact

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.394-399
• /
• 2007

In this study, the characteristic qualities of whole soymilk were examined based on differing hydrolysis condition. The results showed that as the concentration of enzyme preparation(KMF-G) increase, $^{\circ}Brix$, calcium-binding capacity, and the content of free amino acid components also increased. Additionally SDS-PAGE analysis revealed a similar pattern of in the molecular weight of proteins at enzyme preparation concentration 0.20 and 0.35%(w/w). The quality of whole soymilk hydrolysate was shown to be best at a enzyme preparation(KMF-G) concentration of 0.20%(w/w) and hydrolysis time of 60 min. When sterilized at 115, 130 and $145\;^{\circ}C$ for 15 sec each the change in whole soymilk quality was not substantial. Based on the above results, a 0.20%(w/w) enzyme preparation(KMF-G) concentration and 60 mim hydrolysis time was determined to be the optimal hydrolysis condition for whole soymilk. It is anticipated that soymilk hydrolysis will a food material that is diverse in its application and uses.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.392-399
• /
• 2019

The purpose of this study was to evaluate polymerization of TheraCal LC, one of the tricalcium silicate cements. To measure the Vickers hardness number (VHN), the specimens were cured at different light curing time and distance. As a result, the VHN of the upper surface was significantly higher than the lower surface's in all groups (p < 0.05). The VHN of the lower surface was increased significantly with the increase of the light curing time in all distance (p < 0.05). When the distance was more than 4.0 mm at all light curing time, the VHN of lower surface was significantly decreased (p < 0.05). When the specimen was light cured for 20 seconds, the VHN of the lower surface did not exceed 2, which corresponds to 10% of the upper surface's. These results suggested that the 20 second light curing time was not sufficient to polymerize the lower surface under specific conditions and that light-curing time should be increased.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.51.2-51.2
• /
• 2009

본 실험에서는 레이저 간섭 리소그래피를 이용한 2차원 나노 패턴을 형성하였고, 수열합성법을 이용하여 90 도에서 ZnO 나노 기둥을 ZnO/Si 기판 상에 제작 하였다. ZnO 버퍼층은 스퍼터를 이용하여 200도, Ar 분위기에서 증착 하였으며, 레이저 간섭 리소그래피를 이용하여 두 번의 노광을 통해 2차원 나노 패턴을 형성하였다. 먼저, 최적화된 포토레지스트를 ZnO/Si 기판 위에 도포하고, 2500rpm에서 30초간 스핀코팅 한 후, 첫번째 노광을 실시 하였고, ZnO/Si 기판을 회전시켜 첫번째 노광과 교차 시킨 다음 두 번째 노광을 통해 교차하는 부분만 현상되도록 하였다. 기판의 회전 및 기판과 입사 레이저 사이의 각도를 조절하여 제작된 나노 패턴의 종류는 square lattice, centered rectangular lattice, oblique lattice, hexagonal lattice, rectangular lattice, 5가지로, 2차원의 모든 격자를 제작 하였다. 저온 수열합성법에서는 Na citrate를 형상제어제 (surfactant ions)로 사용하여 ZnO 나노 기둥을 형성하였다. $NH_4OH$를 이용하여 용액의 pH를 조절하였고, Zn nitrate hexahydrate를 Zn의 원료 물질로 사용하였다. 2차원 나노 패턴의 3차원 형태는 Atomic force microscopy (AFM, Veeco instruments, USA)를 이용하여 접촉 모드에서 관찰하였고, ZnO 나노 구조는 주사 전자 현미경 (FE-SEM, Model: JSM-6701F, Tokyo, Japan) 를 통하여 분석 하였다. 나노 패턴의 AFM 분석 결과 ZnO/Si 기판상에 포토레지스트가 주기적인 배열을 가지는 것을 확인하였고, ZnO/Si 기판상에 포토레지스트가 완전히 현상된 부분이 일정한 배열을 가지는 것을 확인하였다. 포토레지스트가 현상되어 기판의 표면이 드러난 부분의 크기는 약 250nm로 측정되었다. ZnO 나노 구조의 FE-SEM 분석 결과, 각각의 나노 구조가 나노패턴 중 완전히 현상된 부분만을 통하여 성장되었다는 것을 확인하였고, 형상 제어제로 사용된 Na citrate의 첨가 여부에 따라 나노 구조의 모양이 변화되었다는 것을 알 수 있었다. Na citrate 가 첨가된 나노 기둥의 경우 약 500nm의 길이를 가지는 하나의 기둥 형태로 성장하였다는 것을 확인하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.120-120
• /
• 1999

III-nitride계 물질들은 blue와 UV 영역의 LED, LD와 같은 광소자뿐만 아니라 HBT, FET와 같은 전자소자로도 널리 응용되고 있다. 이와 같은 물질을 이용한 소자를 제작할 수 있는 낮은 저항의 ohmic contact은 필수적이다. Al이나 Ti와 같은 물질을 기초로 한 n-GaN의 경우는 이미 많은 연구결과가 발표되어 전기적 광학적 소자를 동작하는데 충분히 낮은 ohmic contact저항( )을 었다. 그러나 p-GaN의 ohmic contact은 아직까지 많은 문제점을 내포하고 있다. 그 중의 하나는 높은 doping 농도( )의 p-GaN 박막을 성장하기가 어렵다는 것이며, 또 하나는 낮은 접촉 비저항을 얻기 위해선 7.5eV이상의 큰 재가 function을 지닌 금속을 선택해야 한다. 그러나 5.5eV 이상의 재가 function을 갖는 금속은 존재하지 않는다. 위와 같은 문제점들은 p-GaN의 접촉 비저항이 이상의 높은 값을 갖게 만들고 있으며, 이에 대한 해경방안으로는 고온의 열처리를 통하여 p-GaN와 금속 사이에서 화학적 반응을 일으킴으로써 표면 근처에서 캐리어농도를 증가시키고, 캐리어 수송의 형태가 tunneling 형태로 일어날 수 있도록 하는 tunneling current mechanism을 이용하는 것이다. 이로 인해 결국 낮은 접촉 비저항을 얻을 수 있게되며, 일반적으로 p-GaN에서는 Nidl 좋은 물질로 알려져 있다. 그러나 Ni은 50$0^{\circ}C$이상의 열처리에서 쉽게 산화되는 특성 때문에 높은 캐리어를 얻는데 어려운 문제점이 있다. 이에 본 연구에서는 MBE로 성장된 p-GaN박막을 Mg의 activation을 더욱 증가시키기 위해 N2 분위기에서 15분간 90$0^{\circ}C$에서 annealing을 하였으며, ohmic 접촉을 위한 금속으로 높은 재가 function과 좋은 adhesion 그리고 낮은 자체저항을 가지고 있는 Ni/Au를 ohmic metal로 하여 contact한 후에 90$0^{\circ}C$에서 10초간 rapid thermal annealing (RTA)처리를 했다. 성장된 박막의 광학적 성질은 PL로써 측정하였으며, photoconductivity 실험을 통해 impurity의 life time을 분석하였고, persistent photoconductivity를 통해 dark current를 측정하였다. 또한 contact resistance를 계산하기 위해 circular-TLM method을 이용하여 I-V 특성을 조사하였다.

• Physical Therapy Korea
• /
• v.16 no.3
• /
• pp.1-8
• /
• 2009

It is important to find the effective position for cough and sputum clearance in respiratory physical therapy. The purpose of this study was to compare the changes in peak expiratory flow (PEF), forced expiratory volume in 1 second ($FEV_1$), and peak cough flow (PCF) related to functional level and measurement position in patients with Duchenne muscular dystrophy. Twenty one subjects were classified into three functional levels, and measurements was undertaken in three different measurement positions (upright sitting, $45^{\circ}$ reclining and supine). Vitalograph PEF/FEV DIARY was used to measure PEF and $FEV_1$, and Ferraris Pocket Peak was used to measure PCF. Mixed two-way analysis of variance and Bonferroni post-hoc test were used for statistical analysis. The results of the study were as follows: 1) Significant main effects for measurement position were found. 2) PEF was the highest in upright sitting, followed by $45^{\circ}$ reclining, and supine in order. 3) $FEV_1$ in upright sitting and $45^{\circ}$ reclining were significantly greater compared with that in supine. 4) PCF in upright sitting and $45^{\circ}$ reclining were significantly greater compared with that in supine. 5) No significant main effects for functional level were found in PEF, $FEV_1$, and PCF. 6) No significant functional level by measurement position interactions were found in PEF, $FEV_1$, and PCF. Therefore, it is concluded that upright sitting and $45^{\circ}$ degree reclining positions are recommended for effective cough and sputum clearance.

• Applied Microscopy
• /
• v.29 no.1
• /
• pp.75-81
• /
• 1999

Optimum conditions for making the Au and Al internal standards for TEM have been determined experimentally. The Au internal standard was produced by sputter coating at 9mA for 100 seconds in low vacuum $(\leq1\times10^{-3})$. The Al internal standard was produced by evaporation coating at 7kV for 10 minutes in high vacuum $(\leq1\times10^{-5})$. Measurements of the lattice parameters of andalusite and albite feldspars with this Au internal standard resulted in errors of (a) $ \leq1.2%$ in precion and $\leq0.3%$ in accuracy for andalusite: (b) $\leq0.5%$ in precision and $\leq1.1%$ in accuracy for albite feldspars. The most significant error occurred from the measuring processes of distances and angles of electron diffraction patterns. By employing systematic procedures of measurement with high precision devices, this lattice parameter determination method utilizing the internal standard should be a good alternative to the conventional powder XRD method or the sophisticated CBED method for special samples.