• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2005.05a
• /
• pp.5-17
• /
• 2005

본 연구는 경쟁도입이 비 체화된 기술진보에 반영된다는 가정에서 Habijn(2000)의 비 체화된 기술진보추출 방법론을 이용하여 1975년부터 2002년까지 정보통신서비스산업의 비 체화된 기술진보를 식별하였다. 또한 Bai et at.(1998, 2003)이 제시한 구조변화추정방법론을 이용하여, 상기 비 체화된 기술진보 측정치에 대한 구조변화시점을 추정하였다. 추정된 시점에 대한 실증분석결과를 보면, 비 체화된 기술진보의 구조적 변화시점은 본 연구대상자료의 21번째 자료년도인 1995년으로 나타났다. 또 다른 비 체화된 기술진보의 구조변화는 15번째 자료순서인 1989년도에 나타났다. 역시 다른 물리적 감가상각를$(5\%)$을 이용한 비 체화된 기술진보에 대하여 구조변화분석을 실시할 경우, 1995년도와 1981년으로 나타났다. 따라서 1995년 전후에 비 체화된 기술진보의 구조적 변화가 발생했다는 사실을 알 수 있었다. 이러한 실증분석결과는 다른 계량적 검증을 통하여 뒷받침되었다. 따라서 본 연구의 실증분석결과로 볼 때, 1995년 이후에 정보통신서비스산업에서 비 체화된 기술진보성장의 발전경로상에 커다란 구조변화를 경험하였으며, 새로운 경쟁도입이나 해당 산업활성화정책은 정보통신서비스산업발전에 긍정적 역할을 수행했음을 알 수 있었다.

• 월간낙농육우
• /
• s.44
• /
• pp.18-21
• /
• 1985

근간의 원유수급 불균형에 따른 재고 분유의 체화현상은 자못 심각한 바가 있다. 이는 단기적인 우유소비 확대책 만으로는 주기적으로 닥칠것으로 예상되는 우유파동을 해소하기 곤란하다고 판단되므로 여기서는 과거의 우유 소비증가 추세와 우유체화의 주기를 검토한후 장단기 대책으로 구분하여 검토해 보기로 한다.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.2
• /
• pp.391-407
• /
• 2013

The paper tests the embodiment hypothesis by measuring the technological obsolescence of a specific year (1990)'s technology and investigating the relationship between labor productivity and technological obsolescence. This approach is based on Salter (1969) that emphasizes the economic aspect of technology. We use the rate of economic surplus as the proxy of technological obsolescence for 10 main industries, including food processing, textiles, chemicals, non-steel metals, steels, metal products, machinery, electronics, precision machinery, and transportation equipments. The result shows that the embodiment hypothesis is not accepted for the overall manufacturing sector. However, we found the vintage effect - a positive relationship between technological obsolescence and labor productivity over time - in textiles, chemicals, non-steel metals, metal products, electronics, and transportation equipments. Therefore, the government should support R&D investment as well as capital equipments investment for the industries with large vintage effect.

• Journal of Korea Foundry Society
• /
• v.42 no.6
• /
• pp.337-346
• /
• 2022

In order to optimize the solution treatment conditions of Al-7Si-(0.3~0.5)Mg-(0~0.5)Cu alloys, a series of heat treatment experiments were conducted under various solution treatment times up to 7 hours at 545℃, followed by a microstructural analysis using optical microscopy, FE-SEM, and Brinell hardness measurements. Rapid coarsening of eutectic Si particles was observed in the alloys during the first 3 hours of solution treatment but the size of those Si particles did not change at longer solution treatment conditions. Meanwhile, the degree of spheroidisation of eutectic Si particles increased until the solution treatment time was increased up to 7 hours. Q-Al5Cu2Mg8Si6 andθ-Al2Cu were observed in as-cast Cu-containing Al alloys but the intermetallic compounds were dissolved completely after 3 hours of solution treatment at 545℃. Depending on the initial Mg composition of the Al alloys, π-Al8FeMg3Si either disappeared in the alloy with 0.3wt% of Mg content after 5 hours of solution treatment or remained in the alloy with 0.5wt% of Mg content after 7 hours of solution treatment time. Mg and Cu content in the primary-α phase of the Al alloys increased until the solution treatment time reached 5 hours, which was in accordance with the dissolution behavior of Mg or Cu-containing intermetallic compounds with respect to the solution treatment time. From the results of microstructural changes in the Al-7Si-Mg-Cu alloys during solution treatment, it was concluded that at least 5 hours of solution treatment at 545℃ is required to maximize the age hardening effect of the present Al alloys. The same optimal solution treatment conditions could also be derived from Brinell hardness values of the present Al-7Si-Mg-Cu alloys measured at different solution treatment conditions.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.196-213
• /
• 2002

The alkylphenols, chlorophenols and bisphenol A were determined by gas chromatography/mass spectrometry-selected ion monitoring mode followed by three work-up methods for comparison; EPA method, isoBOC derivatization method and TBDMS derivatization method. Eleven phenols in water samples were extracted with dichloromethane. Also, solid-phase extraction (SPE) with XAD-4 and subsequent conversion to isobutoxycarbonyl derivatives or tert.-butyldimethylsilyl derivatives for sensitive analysis with the selected ion-monitoring (SIM) mode. The recoveries were 85.1~109.9% (EPA method) and 90.3~126.6% (isoBOC derivatization and TBDMS derivatization), respectively. The method detection limit of bisphenol A for SIM were 0.732 ${\mu}g/{\ell}$ (EPA method), 0.002 ${\mu}g/{\ell}$ (isoBOC derivatization) and 0.021 ${\mu}g/{\ell}$ (TBDMS derivatization). The SIM responses were linear with the correlation coefficient varying 0.9755~0.9981 (isoBOC derivatization), and 0.9908~0.9996 (TBDMS derivatization). When these methods were applied to treated wastewater sample from a polyethylene plant, the concentrations of 11 phenols were below the method detection limit.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.9
• /
• pp.1120-1127
• /
• 2007

This study was designed to examine the effects of n-6 PUFA rich corn oil, n-3 PUFA rich perilla oil and their conjugated double bond derivatives on serum lipids status in rats. Experimental diets containing lard (control), corn oil (CO), perilla oil (PO), conjugated double bond derivatives of n-6 PUFA rich corn oil (TCO) and n-3 PUFA rich perilla oil (TPO) at the level of 10% (w/w) were fed to male Sprague Dawley rats for 4 weeks. TCO was found to have three derivatives of linoleic acid and TPO had five derivatives of linolenic acid by GC. Serum total cholesterol levels were significantly lower in the all experimental groups than in the control group, and particularly, the lowest in TCO and TPO groups. HDL-cholesterol concentrations were a little higher in the all experimental groups than in the control group, and TCO and TPO groups were not significantly different from CO and PO groups. Serum LDL, LDL-cholesterol, chylomicron and triglyceride concentrations were significantly lower in the all experimental groups than in the control group, remarkably lower in TCO group and particularly, the lowest in the TPO group. Serum free cholesterol and cholesteryl ester concentrations were lower in TCO and TPO groups than in CO and PO groups. From the above research, TCO and TPO groups were effective on the improvement of the lipid compositions in serum and particularly, TPO group was the most effective on the improvement of serum lipids.

• KDI Journal of Economic Policy
• /
• v.34 no.1
• /
• pp.53-85
• /
• 2012

This paper empirically investigates the rates of embodied technological change and their relative contributions to total factor productivity growth for manufacturing, using the Korean plant-level manufacturing data for the period of 1985-2003. We adopt a production-based estimation method proposed by Sakellaris and Wilson (2004) in order to examine the marginal productivity increase of each vintage of equipment over time. We find that the rate of embodied technological progress of Korea's manufacturing sector maintains the annual average level of 13.7 percent from 1985 to 2003, slightly lower than 16.9 percent of the U.S., estimated by Sakellaris & Wilson (2004). While the rate recorded a remarkable increase after the 1997 financial crisis, IT-producing and IT-using industries achieved higher rates of embodied technological progress than non-IT counterparts.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1995.09a
• /
• pp.144-155
• /
• 1995

본 연구는 기술에 대한 대용개념으로 사용되고 있는 연구개발투자의 효과가 산업의 생산성 향상에 얼마만큼 기여하고 있는가에 관한 실증연구로, 그 효 과를 자체 연구개발효과와 파급효과로 나누어 측정하는 데 목적이 있다. 파 급효과의 경우, 중간재의 거래를 통한 체화된 파급효과와 산업간의 기술거리 로 인한 비체화된 파급효과로 나누어 한국 제조산업을 18개로 분류한 후 각 산업의 연구개발스톡을 측정하였으며, 연구개발투자의 체화된 파급효과 측정 을 위하여 산업 연관표를 이용하여 가중치를 계산하였다. 그리고, 비체화된 파급효과 측정을 위하여는 각 산업에서 고용하고 있는 전공별 연구원 수의 자료를 이용 기술거리를 구하였다. 본 연구에서는 각각의 가중치로 구한 연 구개발스톡, 체화된 연구개발 스톡, 그리고 비체화된 연구개발 스톡을 이용 하여 각 독립변수들에 대한 한계생산성을 구하였으며, 분석 방법으로는 단순 회귀분석과 함께 시계열의 효과와 산업간 효과를 고려하는 패널데이터 분석 을 시도하였다. 체화된 파급효과와 비체화된 파급효과 중 하나만을 변수로 포함하는 경우에는 추정치가 유의한 결과를 나타내고 있지만, 두 가지의 변 수를 모두 포함하는 경우에는 보호도 일정하지 않으며 비유의적인 결과를 보였다. 이러한 결과는 다중공선성에 의한 것으로 보인다. 두 가지 파급효과 에 대한 한계생산성 추정치는 기술과 연구개발투자가 외부성을 가지고 있으 며, 기술과 관련된 변수의 도입이 필요함을 시사한다. 또한 이러한 파급효과 의 추정치는 거시차원에서 연구개발 지원의 정당성에 대한 근거를 제시하고 있으며, 기술혁신을 위한 투자의 타당성을 실증적으로 보여주고 있다.사하였다. 이 사례 연구들의 결과는 각 계열사들의 상황에 따라 제시된 외주위탁 전략과 현재의 외주위 탁 전략이 일치할 때 정보 시스템에 대한 사용자 만족도가 보다 높은 것으 로 나타났다. 할 수 있는 효율적인 distributed system를 개발하는 것을 제시하였다. 본 논문은 데이타베이스론의 입장에서 아직 정립되어 있지 않은 분산 환경하에서의 관계형 데이타베이스의 데이타관리의 분류체계를 나름대로 정립하였다는데 그 의의가 있다. 또한 이것의 응용은 현재 분산데이타베이스 구축에 있어 나타나는 기술적인 문제점들을 어느정도 보완할 수 있다는 점에서 그 중요성이 있다.ence of a small(IxEpc),hot(Tex> SOK) core which contains two tempegatlue peaks at -15" east and north of MDS. The column density of HCaN is (1-3):n1014cm-2. Column density at distant position from MD5 is larger than that in the (:entral region. We have deduced that this hot-core has a mass of 10sR1 which i:s about an order of magnitude larger those obtained by previous studies.previous studies.업순서들의 상관관계를 고려하여 보다 개선된 해를 구하기 위한 연구가 요구된다. 또한, 준비작업비용을 발생시키는 작업장의 작업순서결정에 대해서도 연구를 행하여, 보완작업비용과 준비비용을

• Korean Journal of Cognitive Science
• /
• v.22 no.2
• /
• pp.79-101
• /
• 2011

This paper analyzes the central tenet of 'embodied cognition' approaches to the mind which emphasize the essential roles that the body and the environment play in cognitive processes. Those approaches can be best understood through the comparison with the neo-Cartesian conception of the mind, which views the mental and cognitive processes as the same with, or as being realized by the brain processes. However, we can also observe potential tensions among the 'embodied cognition' approaches. This paper highlights a tension between Shapiro's view of embodied cognition and Clark's view of extended cognition by reconsidering them against Block's dilemma of functionalism. Shapiro's view may be regarded as a chauvinistic form of functionalism, whereas Clark's view is a very liberal form of functionalism.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2016

Titanium is resistant to general corrosion and in sea water because of the passivity layer film on the surface of material, but may be attacked by environments that cause breakdown of the protective oxide layer including hydrochloric, sulfuric and phosphoric acids. In this study, the Ti alloys were solution heat treatment 5hours at $1066^{\circ}C$ and $966^{\circ}C$, and followed by aging heat treated, 1, 4, 8 and 16 hours in $500^{\circ}C$, $600^{\circ}C$ and $650^{\circ}C$ respectively. The heat treated specimens were measured micro Vicker's hardness, and then accomplished electrochemical polarization test for comparing corrosion in 1N sulfuric acid solution. Additionally, micro structures were taken for corrosion tested specimens. The results showed that corrosion resistance was higher in solution heat treated alloy than base and age heat treated metal. Measured corrosion resistants were increased as increasing aging heat treatment time and temperature.