• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.713-718
• /
• 2003

The common practice to reduce the compressor noise is installing a muffler. The noise reduction performance of the muffler is the most critical one for the total noise characteristics of the compressor. In this paper, a simple impedance approach using the concept of transmissibility is employed for the acoustic analysis of the muffler, It is known that transmissibility is directly related to insertion loss, and thus transmissibility can Indicate the correct performance of the muffler. The analysis result is supported by a Finite Element Model. In addition, some experiments conducted also show that the transmissibility is mildly related to the measured sound pressure outside the compressor.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1181-1187
• /
• 2009

과잉간극수압의 소산 속도는 일반적으로 압밀방정식에서 정의하는 압밀계수에 의해 결정 되는데, 이 압밀계수는 투수계수와 체적압축계수의 관계로 얻어지는 흙이 특성이며 동일한 성질의 지반에서라도 측정위치에 따라 그 값의 편차가 심한 특성을 보인다. 이에 본 연구에서는 위치적 이질성이 있는 점성토 지반의 압밀과정이 균질한 지반에서의 압밀과 어떤 차이를 보이고, 위치적 이질성으로 인한 불확실성이 압밀소요시간이나 압밀속도에 미치는 영향에 대해 유한차분법을 이용한 수치적인 방법으로 고찰하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.10a
• /
• pp.47-52
• /
• 2002

We present an improved Lagrangian vortex method in 2-D incompressible unsteady viscous flows, which is based on a mesh-free integral approach of the velocity-vorticity formulation. Vorticity fields are represented by discrete vortex blobs that are updated by the Lagrangian vorticity transport with the particle strength exchange scheme. Velocity fields are expressed in a form of the Helmholtz decomposition, which are calculated by a fast algorithm of the Biot-Savart integration with a smoothed kernel and by a well-established panel method. No-slip condition is enforced through viscous diffusion of vorticity from a solid body into field. The vorticity flux is determined in such a way that spurious slip velocity vanishes. Through the comparison with the existing finite volume scheme for the transient vortical flows around an impulsively started cylinder at Reynolds number Re=550, we would obtain a more accurate scheme for vortex methods in complicated flows.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.129-134
• /
• 2001

본 논문에서는 자동차 계기판 지시계 구동용 액츄에이터 연구의 일환으로써 소형 2상 스텝모터에 대하여 유한요소 수치해석을 이용한 설계, 해석 및 One Chip을 이용한 유량, 온도, RPM 및 속도 지시계 동시제어용 전용 구동 IC를 설계하였다. 일반적으로 자동차 계기판에 사용되어지고 있는 지시계의 구동원으로 코일형의 액츄에이터를 사용하고 있으나, 동작구간내의 선형성 및 속응성 저하와 구조상 큰 체적으로 인한 공간확대의 문제가 야기되어지고 있다. 따라서, 본 연구에서는 고 에너지 밀도를 갖는 소형의 영구자석과 저 손실 특성을 갖는 정밀 기어부 설계를 통하여 경량. 박형의 PM형 스텝모터를 설계하였으며. 또한 다수 모델 제어용 전용 드라이버 IC 설계 및 제작을 하였다. 실제로 제작한 모델을 대상으로 특성평가를 행하였으며, 이로부터 높은 선형성 및 고정밀도와 저소음 특성을 갖는 자동차 계기판 지시계용 구동원 및 드라이버의 활용 가능성을 확인 할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.879-882
• /
• 2004

Two-phase flow exists in many industrial components. Characteristics of two-phase flow have been studied by many researchers; however, a further study of the two-phase is required for flow-induced vibration. Characteristics of two-phase flow were measured by force sensor at the end of a vertical pipe. The predominant frequency of fluctuation was obtained for various speeds of flow pattern. A correlation to slug frequency for horizontal flow was obtained by Heywood & Richardson (1979), while Legius et al (1997) for vertical flow. A coefficient based on the correlation is estimated and then compared to the existing ones. The existing empirical formulations for average void fraction were proposed by Wallis (1969), Zuber et al (1967) and Ishii (1970). In the present result, flow parameters, such as flow quality and real velocity, are evaluated with void fraction.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.464-467
• /
• 2003

본 논문에서는 체적 데이터에 대한 효율적인 볼륨 랜더링을 수행하기 위해서, 기존의 광선 추적 기법에 광선 보간을 통해 광선을 추적하는 기법인 IRCF를 제안한다. IRCF 과정은 이웃 화소에 대해 광선추적을 통해서 얻은 불투명도의 정보를 이용하여 보간한 위치에서 새롭게 광선추적을 해가는 방식이다 기존의 광선 추적 랜더링의 경우 고화질의 영상을 얻지만, Volume Rendering Operations의 계샨량이 많아 랜더링 속도가 떨어져 현재 개선된 랜더링 기법들이 많이 제안되고 있는 실정이다. 본 논문은 다른 각도로의 접근하고자 하여 제안한 IRCF 과정을 통해 Volume Rendering Operations의 계샨량을 최대한 줄여 랜더링 속도를 높이고 기존 방식의 고화질 영상에 가깝게 결과를 얻을 수가 있었다. 또한, 본 논문에서는 기존의 광선 추적 기법에서 표현하는 일반적인 회전, 절단, 불투명 등 제어 효과들을 제안한 기법을 통해 비교 분석한다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.13 no.4
• /
• pp.9-17
• /
• 1994

It is well recognized recently that ultrasonic technique is one of the most widely used methods of nondestructive evaluation to characterize material properties of nonconventional engineering materials. Therefore it is very important to understand physical phenomenon on propagation behavior of elastic wave in these materials, which is directly associated with ultrasonic signals in the test. In this study, the theoretical analysis on multi-scattering of harmonic elastic wave due to the particulate with interface between matrix and fiber in metal matrix composites(MMCs) was done on the basis of Lax's quasi-crystalline approximation and extinction theorem. SiC particulate (SiCp) reinforced A16061-T6 composite material was chosen for this analysis. From this analysis, frequency dependences of phase velocity and amplitude attenuation of effective plane wave due to the change of volume fraction of SiC particulate were clearly found. It was also shown that the interface condition between matrix and fiber in MMCs gives a direct effect on the variation of phase velocity of plane wave in MMCs.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.807-815
• /
• 2013

A numerical study on soot formation in a laminar ethylene diffusion flame at atmospheric pressure was conducted to obtain a better understanding of the effects of buoyancy on sooting flames under 0g and 1g using a gas-phase reaction mechanism and thermal and transport properties. A simple model was employed to predict soot formation, growth and oxidation with interactions between the gas phase chemistry and the soot chemistry taken into account. Results showed that the flames in 0g are much wider than that of 1g because of the thicker diffusion layer and reduction in axial velocity. The reduction in the axial velocity in 0g results in longer residence times, and resulting in greatly enhanced soot volume fraction. And, under zero-gravity, due to the lack of a buoyancy-induced instability, flame instability disappears.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2009

Present studies of these experiments was conducted to using water, over a range of cross-flow velocities from 42 to 136 m/s, with injection frequencies from 35.7 to 166.2 Hz. In cross-flow field, main parameters of liquid jet for secondary breakup were cross-flow drag rather than pressure pulse frequency. As oscillation of the periodic pressure, liquid jet was moved up and down. Also, a bulk of liquid jet puff was detected at upper field of liquid surface. Because of pressure pulsation frequency, an inclination of SMD for the structured layer was evanescent. Cross-sectional characteristics of SMD at downstream area were non-structured distributions. The tendency of volume flux value for various frequency of pressure pulse was same distribution. And volume flux was decreased when the frequency of pressure pulse increasing.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.229-239
• /
• 2019

A model of landslides is developed using the shallow water equations to simulate time-dependent performance of landslides. The shallow water equations are derived using the (b, s) coordinate system which can be applied in both river and ocean. The finite volume scheme employing the HLL approximate Riemann solver and the total variation diminishing (TVD) limiter is applied to deal with the numerical discontinuities occurring in landslides. For dam-break water flow and debris flow, numerical results are compared with analytical solutions and experimental data and good agreements are observed. The developed landslide model is successfully applied to predict subaerial and submarine landslides. It is found that the subaerial landslide propagates faster than the submarine landslide and the speed of propagation becomes faster with steeper bottom slope and less bottom roughness.