• Journal of Korean Medical classics
• /
• v.18 no.4 s.31
• /
• pp.155-165
• /
• 2005

진당시기대상한론치법적연구유(晋唐時期對傷寒論治法的硏究有): 왕숙화운용당시성행적(王叔和運用當時盛行的)‘한(汗), 토(吐), 하(下), 온(溫), 구(灸), 자(刺), 수(水), 화(火)’등팔법(等八法), 귀납료상한론적증치경험(歸納了傷寒論的證治經驗); 손사막근거자기적임상경험(孫思邈根據自己的臨床經驗), 파상한론적태양병편진행료(把傷寒論的太陽病篇進行了)‘이방명법(以方名法), 안법류증(按法類證)’, 저시해시기대상한론육경병치법적대표성적연구(這是該時期對傷寒論六經病治法的代表性的硏究), 저종연구유원시화력사적국한성(這種硏究有原始和歷史的局限性), 종중국의학대상한론육경병치법적연구력사고려(從中國醫學對傷寒論六經病治法的硏究歷史考慮), 저성위료후세적치법연구적선구자(這成爲了後世的治法硏究的先驅者), 구유비상대적영향(具有非常大的影響). 재송대대상한론치법적연구상(在宋代對傷寒論治法的硏究上), 기관건작용적의가유방안시화주굉(起關鍵作用的醫家有龐安時和朱肱). 타문대상한론치료원칙적천발(他們對傷寒論治療原則的闡發), 대륙경병적분석귀납(對六經病的分析歸納), 이급제시구체적치법상(以及提示具體的治法上), 도주출료공헌(都做出了貢獻). 방안시주장료응안인(龐安時主張了應按人), 지(地), 시제정치료적사상(時制定治療的思想); 주굉이(朱肱以)‘병유표본(病有標本), 치유선후(治有先後)’위치료원칙(爲治療原則), 여상한론상결합진행치료(與傷寒論相結合進行治療), 대후세의가산생료영향(對後世醫家産生了影響). 도료금원대성무기(到了金元代成無己), 류완소(劉完素), 왕호고등(王好古等), 대내경내용각자이사상관점(對內經內容各自以思想觀点), 분별안변증론치총결료육경병적치료규율(分別按辨證論治總結了六經病的治療規律), 동시대증후화방약진행료분석(同時對證候和方藥進行了分析), 천명료구체적육경병치법적병리전귀(闡明了具體的六經病治法的病理轉歸), 도유기독창성(都有其獨創性). 성무기용내경해석료상한론(成無己用內經解釋了傷寒論), 총결해기(總結解肌) 발한(發汗) 중제발한(重劑發汗) 해표행수(解表行水) 화해(和解) 공비 지열(止熱) 삼설등치법, 위후세대상한론치법적연구개벽료도로, 인이갱가명확화해적개념(因而更加明確和解的槪念), 병응용지금(幷應用至今). 류완소제창료주화론(劉完素提倡了主火論), 중시료상한론한(重視了傷寒論汗), 토(吐), 하삼법적연구(下三法的硏究), 창립료신량해표법(創立了辛凉解表法), 대후세온병치료적발전대래료흔대영향. 왕호고작위이수학파(王好古作爲易水學派), 운용장부적한열허실이론결합약미효능(運用臟腑的寒熱虛實理論結合藥味效能), 탐색료상한론육경병적치료규율(探索了傷寒論六經病的治療規律), 강조료양명병적익진액적치료원칙(强調了陽明病的益津液的治療原則), 대후세연구상한론치법급여료흔대적계발. 이상대상한론치법연구(以上對傷寒論治法硏究), 불근성위당시임상의학적선도(不僅成爲當時臨床醫學的先導), 이차성위료후세연구상한론치법적기초(而且成爲了後世硏究傷寒論治法的基礎).

• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.31-38
• /
• 2013

The prostate cancer is the most common malignant tumor in males. Prostate cancer is the most common malignant tumor that occurs in the male in Korea in 2007 to an annual average of 5,292 cases and 3.3% of the total cancer incidence seventh occurred. Our study compared property for tomotherapy and proton therapy in radiotherapy of prostate cancer patients. We analyzed DVH(Dose Volume Histogram) and dose distribution for prostate, bladder and rectum for radiation treatment planning of prostate cancer with 11 patients in Ilsan K cancer hospital from June to November 2011. There was no differences between tomotherapy and proton therapy in the purpose of prostate cancer therapy for PTV. The adjacent organs of bladder and rectum of average dose-volume were 2port proton therapy that it was low dose treatment comparing with tomotherapy and 5port proton therapy. $H{\cdot}I$ of proton therapy was less than $H{\cdot}I$ of tomotherapy. Also, 5port was less than 2port in $H{\cdot}I$ of proton therapy. However, 2port proton therapy has more advantage over 5port proton therapy that the bladder and rectum of average dose-volume and control time of equipment in radiotherapy of prostate cancer.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.423-430
• /
• 2021

In order to evaluate the fire risk and fire risk rating of wood for construction materials, this study focused on fire performance index-III (FPI-III), fire growth index-III (FGI-III), and fire risk index-IV (FRI-IV) according to Chung's equations-III and -IV. Western red cedar, needle fir, ash, and maple were used as the specimens. The fire characteristics were investigated using a cone calorimeter (ISO 5660-1) equipment on the specimen. The FPI-III measured after the combustion reaction was 0.86 to 12.77 based on polymethylmethacrylate (PMMA). The FGI-III was found to be 0.63 to 5.26 based on PMMA. The fire rating according to the FRI-IV, which is the fire rating index, was 0.05 to 6.12, and the western red cedar was 122.4 times higher than that of the maple. The fire risk rating according to the FRI-IV increased in the order of maple, ash, needle fir, PMMA and western red cedar. The CO peak concentration of all specimens was measured as 103 to 162 ppm, and it was 2.1 to 3.2 times higher than 50 ppm, the permissible exposure limits of the US occupational safety and health administration. Materials such as western red cedar, which have a low bulk density and contain a large amount of volatile organic substances, have a low FPI-III and a high FGI-III, so they have a high fire risk rating.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.75-82
• /
• 2021

This study investigated the fire risk assessment of woods and plastics for construction materials, focusing on the fire performance index-III (FPI-III), fire growth index-III (FGI-III), and fire risk index-IV (FRI-IV) by a newly designed method. Japanese cedar, red pine, polymethylmethacrylate (PMMA), and polyvinyl chloride (PVC) were used as test pieces. Fire characteristics of the materials were investigated using a cone calorimeter (ISO 5660-1) equipment. The fire performance index-III measured after the combustion reaction was found to be 1.0 to 15.0 with respect to PMMA. Fire risk by fire performance index-III increased in the order of PVC, red pine, Japanese cedar, and PMMA. The fire growth index-III was found to be 0.5 to 3.3 based on PMMA. Fire risk by fire growth index-III increased in the order of PVC, PMMA, red pine, and Japanese cedar. COpeak concentrations of all specimens were measured between 106 and 570 ppm. In conclusion, it is understood that Japanese cedar with a low bulk density and PMMA containing a large amount of volatile organic substances have a low fire performance index-III and high fire growth index-III, and thus have high fire risk due to fire. This was consistent with the fire risk index-IV.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.131-135
• /
• 2004

This study was carried out for the analysis of temperature characteristics on soil surface using soil heat flux which is one of the important parameters forming soil temperature. Soil surface temperature was estimated by using the soil temperature measured at 10 cm soil depth and the soil heat flux measured by flux plate at 5 cm soil depth. There was time lag of two hours between soil temperature and soil heat flux. Temperature changes over time showed a positive correlation with soil heat flux. Soil surface temperature was estimated by the equation using variable separation method for soil surface temperature. Arithmetic mean using temperatures measured at soil surface and 10 cm depth, and soil temperature measured at 5 cm depth were compared for accuracy of the value. To validate the regression model through this comparison, F-validation was used. Usefulness of deductive regression model was admitted because intended F-value was smaller than 0.001 and the determination coefficient was 0.968. It can be concluded that the estimated surface soil temperatures obtained by variable separation method were almost equal to the measured surface soil temperature.

• The Korean Journal of Ecology
• /
• v.26 no.4
• /
• pp.189-197
• /
• 2003

Properties of seed production in Corydalis, spring ephemeral, group were studied during two years at Namhansansung area. Corydalis´ flower was out in the early April and its seed dispersed in the early May. The period of total seed production was 30 days. The decrease rate of sex organs was the highest between deflowering time and early fruiting time. The numbers of flower and seed per plant were in the range of 1∼13 and 0∼76, respectively. And the number of seed per fruit was from zero to twenty. In a plant, seed production was the most (11.8 seeds) in the lowest fruit and conspicuously decreased along the upward fruit. In the same plant, seed production was various by each year. The plants of small tuber size produced more seeds and those of large tuber size produced fewer seeds in the next year than this year. In the early growth season, the flowering plants/total plants rate increased in proportion to plant size (tuber volume), the rate of the smallest size class (<100 ㎣) was in the range of 5.0%(1999)∼5.4%(2000), those over the 600 ㎣ size classes were 100%. The number of flower per plant at the same size class were higher in 2000 than in 1999. Especially, at the size class of 900 ㎣≤, the numbers of flower per plant were 13.2 in 2000 and 6.5 in 1999. In the late growth season, the flowering plants/total plants rates were 13.3%in the smallest size class (<100 ㎣)and 100% over the 500 ㎣ size classes. Therefore, the flowering plants/total plants rates along the size classes were higher in the late growth season than in the early one. The bumer of fruit or seed per plant increased in proportion to the volume and dry weight of tuber, there was not significant and varied along each plant in the same size class. The number of fruit or seed per plant conspicuously increased in proportion to the leaf area. Therefore, it was thought that seed production was related to photosynthetic ability during growth season.

• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.85-92
• /
• 2020

Purpose: To find out the advantages of thermoplastic bolus compared to conventional bolus, which is mainly used in clinical practice, We evaluated Two cases in terms of dose and location reproducibility to assess Usability of thermoplastic Bolus for skin VMAT radiotherapy. Materials and Methods: Two patient's treated with left breast skin lesion were simulated using thermoplastic Bolus and planned with 2arc VMAT. the prescription dose was irradiated to 95% or more of the target volume. We evaluated The reproducibility of the bolus position by measuring the length of the air gap in the CBCT (Cone Beam CT) image. to evaluate dose reproducibility, we compared The dose distribution in the plan and CBCT and measured in vivo for patient 2. Results: The difference between the air gap in patient 1's simulation CT and the mean air gap (M1) during 10 treatments in the CBCT image was -0.42±1.24mm. In patient 2, the difference between the average air gap between the skin and the bolus (M2) during 14 treatments was -1.08±1.3mm, and the air gap between the bolus (M3) was 0.49±1.16. The difference in the dose distribution between Plan CT and CBCT was -1.38% for PTV1 D95 and 0.39% for SKIN (max) in patient 1. In patient 2, PTV1 D95 showed a difference of 0.63% and SKIN (max) -0.53%. The in vivo measurement showed a difference of -1.47% from the planned dose. Conclusion: thermoplastic Bolus is simpler and takes less time to manufacture compared to those produced by 3D printer. Also compared to conventional bolus, it has high reproducibility in the set-up side and stable results in terms of dose delivery.