• Title/Summary/Keyword: 체인 개시 반응

Search Result 96, Processing Time 0.026 seconds

Preparation and Characterization of Proton Conducting Crosslinked P(VDF-co-CTFE)-MAA/SEMA membranes (수소이온 전도성 가교된 P(VDF-co-CTFE)-MAA/SEMA 막 제조 및 분석)

  • Patel, Rajkumar;Lei, Zeng Xiao;Heo, Sung Yeon;Kim, Jong Hak
    • Membrane Journal
    • /
    • v.23 no.4
    • /
    • pp.290-296
    • /
    • 2013
  • Poly(vinylidenefluoride-co-chlorotrifluoroethylene) P(VDF-co-CTFE) polymer was attached to methacrylic acid (MAA) in the presence of 1,8-diazabicyclo[5,4,0]undec-7-ene(DBU) catalyst to prepare P(VDF-co-CTFE)-MAA copolymer. The modified P(VDF-co-CTFE)-MAA was polymerized with 2-sulfoethyl methacrylate (SEMA) monomer in the presence of 4',4'-azobis(4-cyanovaleric acid(ACVA) initiator by free radical polymerization to form the proton conducting membrane. The ratio of the SEMA was increased in the membrane to increase the presence of the acidic group. The maximum IEC value that was observed at 50% SEMA was around 0.82 meq/g, which is consistent with the water uptake value. The highest proton conductivity achieved by P(VDF-co-CTFE)-MAA/SEMA membrane with 50% SEMA was approximately 0.041 S/cm. This indicates that the available ionic group for the proton conduction increases with the increase in the SEMA in the membrane.

Characterization of hrp2 + Gene Related to SNF2 Family in Schizosaccharomyces pombe (Schizosaccharomyces pombe에서 SNF2에 속하는 hrp2+ 유전자의 특성 연구)

  • Park, In-Soon
    • Environmental Mutagens and Carcinogens
    • /
    • v.22 no.3
    • /
    • pp.137-141
    • /
    • 2002
  • The SNF2/SW12 family comprises proteins from a variety of species with in vivo functions, such as transcriptional regulation, maintenance of chromosome stability during mitosis, and various types of DNA repair. This study was shown the characterization of hrp2+ gene which was isolated by PCR amplification using the conserved domain of SNF2 motifs. Sequence analysis of hrp2+ gene showed striking evolutionary conservation among the SNF2 family of proteins. The transcript of hrp2+ gene was found to be a 4.7 kb as identified by Northern hybridization. In addition, to determine the transcription initiation site of hrp2+ gene, primer extension analysis was performed. This result showed the band of 64 bp. The transcriptional start point was mapped to a position of 47 base pair from the first ATG codon of translational initiation codon. In order to investigate the inducibility of hrp2+ gene, transcript levels were examined after treating the cells to various DNA damaging agents. The transcripts of hrp2+ were induced by UV-irradiation. But the transcripts were not induced by treatment of 0.25% Methylmethane sulfonate (MMS). These results implied that the effects of damaging agents are complex and different regulatory pathways exist for the induction of this gene.

  • PDF

A Study of Synthesis and Property of $CaCO_3$/Organic Core-Shell Particle (탄산칼슘 /유기계 Core-Shell 입자의 제조와 물성에 관한 연구)

  • Seul, Soo-Duk
    • Polymer(Korea)
    • /
    • v.34 no.1
    • /
    • pp.38-44
    • /
    • 2010
  • Core-shell particles of inorganic/organic pair were synthesized from $CaCO_3$ absorbed sodium dodecyl benzene sulfonate(SDBS) surfactant. Shell components were synthesized by sequential emulsion polymerization. Various monomers were used as shell components such as methyl methacrylate(MMA), ethyl acrylate(EA), butyl acrylate(BA), and styrene(St). Ammonium persulfate(APS) was used as an initiator and 2-ethylhexyl acylate(2-EHA) was used as a functional monomer, In the $CaCO_3$/organic core-shell particle polymerization, $CaCO_3$ absorbed surfactant SDBS of 0.5 wt% was prepared first and then core $CaCO_3$ was encapsulated by emulsion polymerization. 0.1 wt% of APS was added sequentially to minimize the formation of new monomer particle during shell polymerization. The structure of inorganic/organic core-shell particles were characterized by measuring the decomposition degree of $CaCO_3$ using HCl solution, thermogravimetric analyzer, scanning electron microscope, and transmission electron microscope.

Antioxidant Enzyme Activity and Cell Membrane Stability of Korean Bermudagrass Genotypes Different in Ploidy at Dormant Stage (배수성이 다른 자생 버뮤다그래스의 휴면 전후 항산화 효소활성 및 세포막 안정성 변화)

  • Lee, Geung-Joo;Lee, Hye-Jung;Ma, Ki-Yoon;Jeon, Young-Ju;Kim, In-Kyung
    • Asian Journal of Turfgrass Science
    • /
    • v.25 no.1
    • /
    • pp.17-21
    • /
    • 2011
  • Korean bennudagrass collections showed diverse genetic variations in their morphology, growth habit, and cytological aspects. Chromosome number and nuclear DNA content of the bennudagrasses indicated a ploidy level ranging from triploid (2n=3x) to hexaploid (2n=6x). In this study, we investigated the different responses of antioxidant enzymes (superoxide dismutase, catalase, peroxidase, ascorbate peroxidase) and cell membrane stability of those bennudagrass cytotypes to lower temperature and shorter day length, which meets a dormant induction in Korea. All the antioxidant enzymes were found to be higher during dormant stage, while the heme-containing catalase which converts hydrogen peroxide ($H_2O_2$) to water and oxygen molecules was activated before dormant initiation in the three cytotypes except for hexaploid bennudagrass. The triploid and tetraploid which exhibited relatively finer leaves and a rapid establishment speed were found to show increased activities of superoxide dismutase and peroxidase enzyme. The malondialdehyde(MDA) which is a product of lipid peroxidation in the cell membrane damaged by the hydroxyl radical was increased in all cytotypes as temperature declined, and tri- and tetraploids which had more protective antioxidant enzymes demonstrated a significantly lower MDA production. Similarly electrolyte leakage was higher in penta- and hexaploidy, seemingly more damage to cell membrane when low temperature was implemented. Results indicated that antioxidant responses of different cytotypes were genetically specific, which needs to be investigated the relevance with the low temperature tolerance in the bermudagrass further at the molecular level.

Preparation and Characterization of Proton Conducting Crosslinked Membranes Based On Poly(vinyl chloride) Graft Copolymer (Poly(vinyl chloride) 가지형 공중합체를 이용한 수소이온 전도성 가교형 전해질막의 제조와 분석)

  • Kim, Jong-Hak;Koh, Jong-Kwan;Choi, Jin-Kyu;Park, Jung-Tae;Koh, Joo-Hwan
    • Membrane Journal
    • /
    • v.18 no.4
    • /
    • pp.261-267
    • /
    • 2008
  • A graft copolymer consisting of poly(vinyl chloride) (PVC) backbone and poly(hydroxyethyl acrylate) (PHEA) side chains was synthesized via atom transfer radical polymerization (ATRP). Direct initiation of the secondary chlorines of PVC facilitates grafting of hydrophilic PHEA monomer. This graft copolymer, i.e. PVC-g-PHEA was cross-linked with sulfosuccinic acid (SA) via the esterification reaction between -OH of the graft copolymer and -COOH of SA, as confirmed by FT-IR spectroscopy. Ion exchange capacity (IEC) continuously increased to 0.87meq/g with increasing concentrations of SA, due to the increasing portion of charged groups in the membrane. However, the water uptake increased up to 20.0wt% of SA concentration above which it decreased monotonically. The membrane also exhibited a maximum proton conductivity of 0.025 S/cm at 20.0 wt% of SA concentration, which is presumably due to competitive effect between the increase of ionic sites and the crosslinking reaction.

Synthesis of Dendritic Polystyrene-block-Linear Poly(t-butyl acrylate) Copolymers by an Amide Coupling (아미드 커플링을 통한 덴드리틱 Polystyrene-Block-Linear Poly(t-butyl acrylate) 공중합체의 합성)

  • Song, Jie;Cho, Byoung-Ki
    • Polymer(Korea)
    • /
    • v.33 no.2
    • /
    • pp.158-163
    • /
    • 2009
  • In this study, we synthesized a series of dendritic polystyrene-b-linear poly (t-butyl acrylate) copolymers with well-defined molecular architectures. The hydroxyl group located at the focal point of the second generation dendron bearing polystyrene ($M_n$ = 1000 g/mol) peripheries was converted into amine group via the following stepwise reactions: 1) tosylatoin, 2) azidation, and 3) reduction. On the other hand, the linear poly (t-butyl acrylate)s were prepared by an atom transfer radical polymerization (ATRP) of t-butyl acrylate where benzyl 2-bromopropanoate and Cu(I)Br/PMDETA were used as initiator and catalyst, respectively. To convert the end group of prepared poly (t-butyl acrylate) s into carboxylic acid, a debenzylation was performed using Pd/C catalyst under $H_2$ atmosphere. In the final step, dendritic-linear block copolymers were obtained through a simple amide coupling reaction mediated by 4-(dimethylamino) pyridine(DMAP) and N,N'-diisopropylcarbodiimide(DIPC). The resulting diblock copolymers were shown to have well-defined molecular weights and narrow molecular weight distributions as supported by $^1H$-NMR spectroscopy and gel permeation chromatography(GPC).

Molecular Cloning and Expression of the Novel Attacin-Like Antibacterial Protein Gene Isolated from the Bombyx mori (집누에로부터 새로운 attactin 유산 항세균성 펩타이드 유전자의 분리 및 발현)

  • 윤은영;김상현;강석우;진병래;김근영;김호락;한명세;강석권
    • Korean journal of applied entomology
    • /
    • v.36 no.4
    • /
    • pp.331-340
    • /
    • 1997
  • Hyalophora cecropia attacin-like antibacterial gene was isolated from Bombyx mori induced with nonpathogenic bacteria. It was expressed in Spodopfera frugiperda 9 (Sf9 cells using baculovirus expression vector system (BEVS), and examined its antibacterial activity. With a cDNA library constructed from fifthinstar B. mori injected with Escherichia coli(4 X IOhcellsllarva), differential screening was performed using naive and induced mRNA probes. BmInc6 clone was screened by partial nucleotide sequence and GenBank database analysis. A complete nucleotide sequence of Bmlnc6 cDNA was determined (GenBank, AF005384). Its insert size was 852 bp and had open reading frame that started translation at position 35 and stopped at 679. And its putative polyadenylational signal existed at 812 bp. The number of amino acid deduced from Bmlnc6 cDNA was 214 and hydropathy analysis showed that this peptide was hydrophilic. This peptide deduced by BmInc6 was named nuecin. When the nuecin gene was expressed in Sf9 cells using BEVS, about 950 bp of the transcripts was detected. In addition, SDS-PAGE analysis showed that the molecular weights of intracellular expressed protein and the mature protein secreted to culture media were approximately 23 and 20 kDa, respectively. The antibacterial activity of nuecin against E. coli and Bacillus subtilis was significantly high, demonstrating that nuecin had a wider antibacterial spectrum with gram negative and positive bacteria than attacin.

  • PDF

Curvature stroke modeling for the recognition of on-line cursive korean characters (온라인 흘림체 한글 인식을 위한 곡률획 모델링 기법)

  • 전병환;김무영;김창수;박강령;김재희
    • Journal of the Korean Institute of Telematics and Electronics B
    • /
    • v.33B no.11
    • /
    • pp.140-149
    • /
    • 1996
  • Cursive characters are written on an economical principle to reduce the motion of a pen in the limit of distinction between characters. That is, the pen is not lifted up to move for writing a next stroke, the pen is not moved at all, or connected two strokes chance their shapes to a similar and simple shape which is easy to be written. For these reasons, strokes and korean alphabets are not only easy to be changed, but also difficult to be splitted. In this paper, we propose a curvature stroke modeling method for splitting and matching by using a structural primitive. A curvature stroke is defined as a substroke which does not change its curvanture. Input strokes handwritten in a cursive style are splitted into a sequence of curvature strokes by segmenting the points which change the direction of rotation, which occur a sudden change of direction, and which occur an excessive rotation Each reference of korean alphabets is handwritten in a printed style and is saved as a sequence of curvature strikes which is generated by splitting process. And merging process is used to generate various sequences of curvature strikes for matching. Here, it is also considered that imaginary strokes can be written or omitted. By using a curvature stroke as a unit of recognition, redundant splitting points in input characters are effectively reduced and exact matching is possible by generating a reference curvature stroke, which consists of the parts of adjacent two korean alphasbets, even when the connecting points between korean alphabets are not splitted. The results showed 83.6% as recognition rate of the first candidate and 0.99sec./character (CPU clock:66MHz) as processing time.

  • PDF

Solid Phase Synthesis of Lysine-exposed Peptide-Polymer Hybrids by Atom Transfer Radical Polymerization (ATRP를 이용한 Lysine 말단기를 가진 펩타이드-고분자 하이브리드 합성)

  • Ha, Eun-Ju;Kim, Mijin;Kim, Jinku;An, Seong Soo A.;Paik, Hyun-Jong
    • Polymer(Korea)
    • /
    • v.38 no.4
    • /
    • pp.550-556
    • /
    • 2014
  • Recently, the peptide(or protein)-polymer hybrid materials (PPs) were sought in many research areas as potential building blocks for assembling nanostructures in selective solvents. In PPs, the facile routes of preparing well-defined peptide-polymer bio-conjugates and their specific activities in various applications are important issues. Our strategy to prepare the peptide-polymer hybrid materials was to combine atom transfer radical polymerization (ATRP) method with solid phase peptide synthesis. The standard solid phase peptide synthesis method was employed to prepare the PYGK (proline-tyrosine-glycine-lysine) peptide. PYGK is an analogue peptide, PFGK (proline-phenylalanine-glycine-lysine), which interacted with plasminogen in fibrinolysis. The peptide and the peptide-initiator were characterized with MALDI-TOF mass spectrometry and $^1H$ NMR spectrometer. The peptide-polymer, pSt-PYGK was characterized by GPC, IR, $^1H$ NMR spectrometer and TLC. Spherical micellar aggregates were determined by TEM and SEM. Current synthesis methodology suggested opportunities to create the well-defined peptide-polymer hybrid materials with specific binding activity.

Effect of Light Condition before and after Chilling Treatment on the Survival and Physiological Responses of Cucumber (Cucumis sativus L.) Seedlings (냉온처리 전후의 광환경 조건이 오이 묘의 생존율에 미치는 영향)

  • Yooun Il Nam;Young Hoe Woo;Hyung Jun Kim
    • Journal of Bio-Environment Control
    • /
    • v.10 no.3
    • /
    • pp.165-171
    • /
    • 2001
  • This study was conducted to investigate the influence of light condition before and after chilling treatment started at different times of a day on the survival and physiological responses of cucumber seedlings grown in a greenhouse. Percent survival of cucumber seedling exposed to a chilling temperature of 2$^{\circ}C$ for 48 hours varied considerably depending upon the initiation time of chilling treatment. Seedlings exposed to chilling treatment from 7:00 o clock, the end of a dark period, showed considerably lower % survival of 30.6% as compared to 90.2% in those exposed to the same treatment starting from 18:00 o clock, the end of a photoperiod. This difference in % survival was found to be closely associated with content of photosynthetic assimilates in seedlings. Relative amount of electrolyte leakage was 57.1% in seedlings chilled from 7:00 o clock and 25.9% in seedlings chilled from 18:00 o clock. Among the ions found in the electrolyte leakage, content of $K^{+}$ was the greatest, followed by that of N $a^{+}$, $Mg^{+}$ and $Ca^{+2}$. Light illumination for 2 hours or longer shortly before chilling treatment during the dark period was effective in increasing % survival of seedlings, probably because of increased photosynthetic assimilates in seedlings. Light illumination during a 48 hour chilling treatment at 3$^{\circ}C$ significantly reduced % survival to 43.3% as compared to 92.0% in seedlings kept continuously in darkness.ess.s.

  • PDF