• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.359-364
• /
• 2010

Three kinds of functional regions such as continuous slurry(${\varepsilon}_f$), bubble(${\varepsilon}_b$) and wake(${\varepsilon}_w$) regions were identified, and the individual phase holdups of each functional region were determined in a three-phase slurry bubble column of 0.152 m ID. The holdups of bubble and wake were measured by adopting the electrical resistivity probe method. Effects of gas velocity and solid concentration in the slurry phase on the individual holdups of functional regions in the column were discussed. The holdup of continuous slurry phase decreased but that of bubble or wake increased, with an increase in the gas velocity in the column. The increase of solid content in the slurry phase could lead to the increase in the holdup of continuous slurry phase but decrease in the bubble or wake holdup. The portion of wake holdup was in the range of 15~40% of the bubble holdup, which decreased with increasing gas velocity or solid content in the slurry phase. The individual holdups of three functional regions were well correlated with operating variables within this experimental conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.127-127
• /
• 2023

지표수와 하상 경계층에서 발생하는 흐름 교환은 하천, 호소, 연안, 해안 등 자연계에 존재하는 수환경시스템에서 일반적으로 나타나는 수리학적 특성으로서, 흐름 교환이 발생하는 경계층 아래 하상층 영역을 혼합대(hyporheic zone)라 부른다. 수질오염사고 등에 의해 외부의 오염물질이 하천 내 유입될 경우, 혼합대 흐름에 의해 하상층으로 침투되고 지표수 대비 유속이 느린 하상 내 공극 흐름에 의해 거동함에 따라 이들의 하천 내 체류시간이 증가하게 된다. 따라서, 본 연구에서는 지표수와 하상 흐름을 연계한 수치해석 방법을 적용하여 혼합대가 지표수 내 용질 체류시간에 미치는 영향을 분석하였다. 먼저 연직 2차원 Reynolds 평균 Navier-Stokes(RANS) 방정식과 Darcy 방정식을 연계하여 지표수와 하상 내 흐름을 해석하였다. 지표수 영역은 RANS 방정식을 이용하여 모의하였고, 지표수 흐름해석에서 얻어진 하상의 압력장을 경계조건으로 하여 Darcy 방정식과 함께 하상 내 흐름을 모의하였다. 여기서 하상의 형태는 자연계 하천에서 일반적으로 관찰되는 사련하상(Ripple bed)으로 모사하였다. 이후, 지표수-하상 연계모의를 통해 얻어진 흐름 결과를 바탕으로 지표수-하상 경계층에서 용질거동을 모의하였다. 흐름 모의결과를 과거 실험자료와 비교한 결과, 지표수 영역 내연직흐름 분포를 정확하게 재현하였고, 동시에 혼합대 흐름 구조에 큰 영향을 미치는 지표수-하상 경계층 압력 분포 역시 관측값과 유사하게 나타났다. 용질거동 해석을 통해 얻어진 용질의 체류시간을 분석한 결과, 혼합대 흐름이 고려된 경우(투수성 하상)와 고려되지 않은 경우(불투수성 하상)를 비교했을 때 전자에서 체류시간 분포의 감수곡선이 길어지고 첨두농도가 감소하는 것으로 나타났다. 아울러, 지표수 영역의 유입부 경계의 평균 유속이 증가함에 따라 최대 체류시간이 감소하는 것으로 나타났는데, 이는 지표수-하상 경계층에서의 압력 경사가 커져 혼합대 내 유속이 증가함에 기인하는 것으로 분석되었다.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.481-487
• /
• 2009

In this of study, effects of input air velocity(0.05~0.22 m/sec) and molten carbonate salt temperature ($870{\sim}970^{\circ}C$) on flow regime transition have been studied by adopting a drift-flux model of air holdup and a stochastic analysis of differential pressure fluctuations in an air-molten sodium carbonate salt two-phase system(molten salt oxidation process). Air holdup where the flow regime transition begins was determined by air holdup-drift flux plot. The air holdup value which the flow regime transition begins was increased with increasing molten carbonate salt temperature due to the decrease of viscosity and surface tension of molten carbonate salt. To characterize the flow regime transition more quantitatively, differential pressure fluctuation signals have been analyzed by adopting the stochastic method such as phase space portraits and Kolmogorov entropy, The Kolmogorov entropy decreased with an increasing of molten carbonate salt temperature but increased gradually with an increase in an air velocity, however, it exhibited different tendency with the flow regime and the air velocity value which flow regime transition begins was same to the results of drift-flux analysis.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.339-343
• /
• 2011

This study is to examine the effect of freshwater influx on residence time to understand a long-term material transportation in enclosed bay. To predict the residence times of the coastal water in Masan bay, we were carried out the numerical simulations by using a EFDC model to simulate seawater circulation and particle tracking. The average residence times of Masan bay obtained from the particle release simulations under the condition to neglect a freshwater influx were estimated to be about 110 days in northern part of the bay to near Dotseom, 40 days in around Modo and 20 days in Budo to open sea. However, the average residence times under the condition consider with freshwater influx decreased about 81 days in both Region 1(northen Masan bay to near Dotseom) and Region II (Dotseom to Modo), but the Region III(Modo to Budo) and Region IV(Budo to open sea) incresed about 58 days and 17 days, respectively.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.248-254
• /
• 2009

Budgets of fresh water, salt, DIP and DIN in the Youngsan river estuary were estimated seasonally in order to clarify the characteristics of material cycling and flux of nutrients with a simple box model. Inflow volumes of freshwater into system was approximately $36.481{\times}10^6{\sim}663.634{\times}10^6m^3/month$ and existing water mass of freshwater in system calculated by salt budget was approximately $2.515{\times}10^6{\sim}5.812{\times}10^6m^3$. Mean residence time of freshwater was calculated to be about 0.26~2.03 day. water exchange $1,248{\times}10^6{\sim}9,489{\times}10^6m^3/month$ assumed with salinity between estuary and adjacent ocean. Inflow mass of DIN and DIN were approximately 76.63~1,149.91 ton/month and 2.91~61.22 ton/month, respectively. Residence times of DIP and DIN were calculated to be 0.45~1.10 day and 0.28~1.92 day, respectively. The ratio of water residence time versus DIP, DIN residence time was calculated that freshwater residence time was longer than DIP, DIN residence time except for summer season. Thus, We assume that circulation of Nutrients in the system will happen rapidly except for summer season. Specially DIP in Winter could assume to outer input source existence because of seawater inflow in system and high DIP concentration in open sea.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.1
• /
• pp.9-19
• /
• 2016

This study investigated the variations of Taylor flow and particle residence time in a Taylor reactor according to the changes of angular velocity and inlet velocity using computational fluid dynamics technique. The results showed that the fluid in a reactor became unstable with an increase of angular velocity. The flow moved to the regions of CCF, TVF, WVF and MWVF resulting in an increase of Reynolds number. Accordingly, the flow characteristics were different for each regions. We confirmed that the inlet velocity influences the Taylor flow. The particle residence time and standard deviation increased with an increase of angular velocity and a decrease of inlet velocity.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.6
• /
• pp.77-82
• /
• 2012

In this paper, the new location management scheme based on region and movement threshold has been proposed in order to minimize the required cost to handle the resource location management signaling traffics under the wire/wireless convergent networks when the users are moving around the cold and hot regions. In this scheme, the sequential paging is supposed to be performed according to the movement threshold which can be changed in accordance with the number of movements that each mobile user had made while it is moving around the resource regions. With the proposed scheme, the cost of managing the location management traffics and efficient spectrum assignment overhead can be minimized by placing signaling traffics for location managements and also allocating radio spectrum considering individual movement behaviors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.53-53
• /
• 2020

오염물질 유출 사고가 발생했을 경우 안전한 수자원의 관리 및 공급을 위해 오염물질의 혼합거동에 대한 정확한 해석이 필요하다. 하천에 유입된 오염물질의 혼합 거동에 영향을 미치는 인자들은 다양하지만, 수리구조물 등에 의해 발생한 저흐름 영역에 의해 오염물질이 정체되는 현상에 대한 연구는 아직 미흡한 실정이다. 특히, 국내 하천에는 약 33,000여 개가 넘는 취수보가 설치되어 있으며, 이 보들은 대부분 광정보 형태의 농업용수 취수를 목적으로 하고 있다. 이러한 보에는 저유량 시기에 보 상하류간의 흐름을 원활하게 하기 위한 노치(notch) 형태의 배수로가 설치되어 있으며, 노치로 인하여 보 상류쪽에 연직방향 뿐만 아닌 수평방향 흐름장의 변화 및 저흐름 영역이 형성된다. 따라서 본 연구에서는, 노치가 설치된 보 구조물 주변에서의 수평 방향 흐름 구조 및 오염물질의 혼합 거동을 분석하여 하천 저장대 모형의 매개변수를 산정하였다. 저흐름 영역에 의하여 오염물질의 정체현상이 발생할 경우, 일반적으로 오염물질 혼합 해석에 사용되는 Fickian 이송-확산 모형은 농도의 공간 분포를 잘 재현하지 못하기 때문에 non-fickian 모형인 하천 저장대 모형이 널리 사용되고 있다. 하천 저장대 모형에서의 주요 매개변수로는 저장대 영역(저흐름 영역)의 면적과 질량교환계수가 있으며, 본 연구에서는 노치의 조건 변화에 따른 저장대 영역 및 질량교환계수의 변화를 분석하기 위하여 수리실험을 수행하였다. 노치의 조건 변화에 따른 저장대 모형의 매개변수 산정을 위하여 보 구조물이 설치되어 있는 개수로에서 수리실험을 수행하였으며, 광범위의 수평방향 흐름구조 및 오염물질의 혼합거동을 분석하기 위하여 LSPIV(Large Scale Particle-Image-Velocimetry) 및 PCA(Planar-Concentration-Analysis) 기법을 이용하여 유속 및 오염물질의 농도자료를 취득하였다. 취득된 유속 자료 및 농도자료를 바탕으로 보 상류에 위치한 저흐름영역의 크기 및 저흐름 영역과 주 흐름 영역 사이의 농도변화를 분석하였다. 실험자료 분석결과, 노치의 간격이 커질수록 저흐름영역의 크기 또한 증가하였으며, 오염물질의 체류시간 또한 증가하는 것으로 밝혀졌다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.62-68
• /
• 2001

In an early engine development, it is highly required to determine the Key Test Points at the main driving, zone and lessen those points to reduce a test duration. This paper describes that it is possible not only to predict the cycle fuel consumption[g/km], emissions[g/km] from engine data(BSFC[g/kWh], emissions[g/kWh]) but also to confirm the emission regulation potential before a vehicle test.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.527-532
• /
• 2016

The effects of gas velocity and solid circulation rate on the axial solid holdup distribution have been determined in a 10 mm-I.D. ${\times}$ 800 mm-high circulating fluidized bed plasma reactor under reduced pressure (1torr). Polystyrene polymer powder and nitrogen gas are used as solid and gas materials respectively. The change of solid circulation rate by a large gas flow rate of the riser (40~80 sccm) is also possible by a relatively small gas flow rate of the solid recirculation part (6.6~9.9 sccm). The solid circulation rate in the reactor under reduced pressure increases with increasing aeration velocity in the solid recirculation part. The axial solid holdup in the riser decreases from the dense at the bottom to the dilute phase at the top section of the riser. Solid holdups at the axial positions in the riser increase linearly with increasing solid circulating velocity. From these results, we could determine the position of plasma load for good plasma ignition, maintain and plasma reaction.