• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.8
• /
• pp.626-631
• /
• 2002

A modified equation for the evaluation of discomfort of a seated human body exposed to differential vibration at the seat and the floor was proposed in this paper. Through the review and analysis of the preceding studies, effect of phase difference between the seat and the floor vibration on discomfort were quantitatively identified. The phase effect was shown to be governed by not only phase difference between the two vibrations but both their frequency and the magnitude, which means the present equation for the evaluation of perceptual amount of vibration provided by ISO 2631-1 should be modified. The proposed equation was developed such that the correction function was multiplied to the present equation. The correction function consisted of three parts, each of them represented the effect by phase difference, frequency and vibration magnitude on discomfort respectively.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.138-145
• /
• 2005

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.127-135
• /
• 2014

Interactive-typed devices and contents that have been often applied in the field of entertainment and game are the technology that allows you to maximize the enjoyment and participation of users through the interaction of each. In this paper, we designed an interactive-typed smartphone app that is based on the Android platform, implemented the wearable Bluetooth device to control via a interactive interface with a vibration sensor and three-axis acceleration sensor. We tested the functionality and 3-axis motion's operability by using smartphone app, interface interactive-typed device that has been developed, prove useful as a wearable Bluetooth device that has the convenience of the user. Further, it is shown that by implementing the optimized protocol of the sensor data transfer over Bluetooth, it is possible to reduce the malfunction of the content of the smart phone.

• Journal of Game and Entertainment
• /
• v.1 no.1
• /
• pp.15-22
• /
• 2005

Among recent technologies that are applied to game development, virtual reality part is getting much attention for its technological effectiveness in transmitting game processing circumstances in variety that are happening in game world very realistically. In this study we analyze interface for game that is based on a action realization technology and force-feedback technology among technologies for developing virtual reality, in other words, technical analogy on game controller and the positive and negative sides of game controller for each platform. Based on that, more ordinary and effective way to deliver the functions to users in PC game field where application of force-feedback technology is least satisfied. And, Force-Feedback seat has been developed to satisfy the users' needs by using vibration.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.06a
• /
• pp.55-72
• /
• 1993

Dynamic compaction may cause some demages to structures becasue it uses the impact energy of heavy weight with high drop height. This study measured and analyzed the vibrations at the (bnamic compaction site which was composed of man-made land fill. From the vibration analysis, it was found that the particle velocity and attenuation was greatest in longitudinal direction and smallest in transversal direction, the dominant frequency ranged from 7 Hz to 9 Hz and the structural damage could be prevented by reducing the drop height at the vicinity of the vibration sentialive structures. Also, the damage to the office equipment could be prevented by doing the dynamic compaction work curing closed-office hours.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.165-172
• /
• 2003

This study aims to find frequency weighting curves for the evaluation of drivers' discomfort by vertical and rotational steering wheel vibration. Equal sensation curves, inverse of frequency weighting curves, were determined for the two kinds of vibrations respectively by using the sinusoidal signals with reference amplitudes from 0.2 to 0.4 m/s2 in the frequency range from 5 to 100 ㎐. Twelve subjects joined at the tests, and median values of the twelve judgments were used to determine the equal sensation curves. An experiment was followed to compare the relative sensation magnitude between the two kinds of equal sensation curves, which showed discomfort by the rotational vibration was 1.5 times of that by the vertical vibration at 50 ㎐.

• Journal of KSNVE
• /
• v.11 no.3
• /
• pp.461-470
• /
• 2001

A friction-type clutch system sometimes generates spick-slip vibration during engagement, which disturbs smooth start of a car and makes a passenger uncomfortable. In this study, the spick-slip vibration in four types of friction couples was investigated at two different engagement conditions respectively of which the amount of slip time and clutch travel was varied. Results are found as follows. First, the vibration increased at the condition of small engine torque and large torque fluctuations due to higher harmonics of engine speed. Second, the friction couple without a pre-damper has advantages of reducing the vibration. This study also suggested an evaluation method of vehicle vibration in the view point of human perception by using the frequency weighting of ISO2631-1.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.463-466
• /
• 2002

건설현장의 특성상 굴착공사는 필수공정이고 비록 말뚝공사가 없다할지라도 암반굴착 등 진동소음 발생여지는 언제나 존재하고 있다고 할 수 있다 이에 대한 국부적인 암반발파, 파쇄에 따른 소음감소 또한 큰 문제를 야기할 수 있다. 건설현장 자체적으로 민원 발생에 대비하여 인접 주택 지점에서 소음 계측을 하고 허용값 초과 여부를 판단하는 실행을 하고 있으나 주민이 느끼는 체감 소음은 조금 다를 수도 있어서 민사소송으로까지 확대되어 현장경영 및 공정에 큰 타격을 가하고 회사 이미지 실추로까지 이어질 수 있고 막대한 보상비 지급이 뒤따를 수도 있는 상태로까지 확대될 수 있다.(중략)

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.108-113
• /
• 2007

This study aims to find equivalent comfort contours, reciprocal of frequency weighting curves, for vertical steering wheel vibration. Psychophysical responses were measured from twelve male subjects by using magnitude estimation of relative discomfort due to vertical steering wheel vibrations of magnitude of 0.1 to 1.58 $m/s^2$ in the frequency range of 4 to 250 Hz. Relative discomfort were estimated with a reference vibration of 0.4 $m/s^2$ at 31.5 Hz. Equivalent comfort contours were produced from the median of sensation magnitudes judged by twelve subjects, which showed variation in the shapes with increase of vibration magnitude. A shape of the contour came close to the perception threshold curve with decrease of vibration magnitude. When the vibration magnitude increases, the shape changed close to those in the references of Hong and et al (2003). It is also recommended frequency weighting curves for vertical steering wheel vibration must be expressed as a function of vibration magnitude as well as frequency.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.1
• /
• pp.5-12
• /
• 2020

Vibration propagated from seismic sources has damping according to distance and amplification and reduction characteristic in different regions according to topography and geological structure. The vibration propagated from the seismic source to the bedrock is largely affected by the damping according to the separation distance, which can be simply estimated through the damping equation. However, it is important to grasp geological information by location because vibration estimation transmitted to the surface are affected by the natural period of the soil located above the bedrock. Geotechnical investigation data are needed to estimate the seismic intensity based on geological information. If there is no Vs profile, the standard penetration tests are mainly used to determine the soil parameters. The Integrated DB Center of National Geotechnical Information manages the geotechnical survey data performed on the domestic ground, and there is the standard penetration test information of 400,000 holes. In this study, the possibility of quantitation the amplification coefficient for each region was examined to calculated the physical interactive seismic intensity based on geotechnical information. At this time, the shear wave column diagram was generated from the SPT-N value and ground response analysis was performed in the target area. The site coefficients for each zone and the seismic intensity distribution for the seismic motion present a significant difference according to the analysis method and the regional setting.