• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.545-556
• /
• 2021

In this study, we aimed to elucidate the materialistic characteristics of 11 pieces of earthenware belonging to the Neolithic and Bronze Age excavated from Jeongseon Auraji, South Korea. As a result, the chemical composition of earthenwares belonging to the early Bronze Age was distributed in the intermediate area between the Neolithic and Bronze Age earthenwares, but no significant difference was confirmed based on their manufacturing period. Upon comparison, the earthenwares excavated from Jeongseon Auraji site were found to comprise less acidic components than those excavated from Yeongdong, and are characterized by the alkaline components depending on the excavated site. In the rare earth elements distribution pattern, all the analyzed earthenwares exhibited similar pattern, confirming that the raw materials present in the clay were the same. As a result of microstructure analysis, the clay particles and voids were found to be irregularly distributed in the analyzed earthenwares. Neolithic earthenwares exhibited many irregular voids, and an arrangement of aluminosilicate, including feldspar, was observed along with the clay substrate. Furthermore, we confirmed that the empty space in early Bronze Age earthenwares was filled with fine particles and cube crystals. Moreover, the main mineral phase of earthenwares excavated from Jeongseon Auraji exhibited similar composition, and therefore, there was no significant difference in the firing temperature of these earthenwares. The firing temperature of the earthenwares ranged from 750 to 850℃.

• KOMUNHWA
• /
• no.60
• /
• pp.27-64
• /
• 2002

It has been known that pit-wooden chamber tomb with stone piling, pit-wooden chamber tomb, jar coffin tomb and fosse-girded tomb were the chief burial systems of the 'Jumtodae' pottery cultural age in Honam province. But in this thesis, I lay emphasis on

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.255-271
• /
• 2009

This study was examined interpretation of making techniques and provenance interpretation of raw materials for the potteries from the Nongseori site in Giheung based on archaeometric characteristics. The potteries are classified into three groups according to the archaeological age. The texture of Neolithic age potteries is sandy soil added a lot of temper such as talc and mica, and Bronze age potteries contain sandy materials which occur naturally include quartz, orthoclase, plagioclase and mica. On the other hand, Proto-three Kingdom Age potteries made of silty soil that sift out coarse minerals from the clay. But all pottery and soil samples in the study were very similar patterns with geochemical evolution trend. This result is sufficient evidence that all pottery samples were produced using the same raw materials from the host rocks around of the site area. The Neolithic age potteries had loose texture and fired probably about 700 to $760^{\circ}C$. The Bronze age potteries had experienced firing about 850 to $900^{\circ}C$. And Proto-three Kingdom Age potteries had compact textured and fired from 900 to $1,050^{\circ}C$. The making techniques of potteries are not represented discontinuation characteristics about the periodic time sequences, and are suggested that revealed a transitional change patterns for production techniques.

• Journal of Conservation Science
• /
• v.31 no.1
• /
• pp.47-64
• /
• 2015

The excavated potteries and raw clays of the Bronze Age from the archaeological sites in the Cheonan-Asan area were studied on material scientific characteristics and homogeneity. Under the microscope, grainsize of the tempers in the potteries were distributed from less than 1mm to 10mm. Microtexture of the potteries showed various shapes and sizes of pores. In addition to the main minerals such as quartz, feldspar, mica, hornblende, chlorite and talc were found from the X-ray diffraction analysis of potteries, while talc was not found in the raw clay. Therefore, it was considered as an artificially added mineral. Firing temperature of the potteries, which did not contain chlorite, are assumed that they were baked below $850^{\circ}C$. On the other hand, the potteries which had mica and talc, are assumed that they were fired below $900^{\circ}C$. The geochemical characteristics of the potteries and raw clays showed very similar patterns, that means the potteries were produced by using the raw clay sources from each site.

• Proceedings of the Korean Quaternary Association Conference
• /
• 2002.06a
• /
• pp.11-15
• /
• 2002

• KOMUNHWA
• /
• no.58
• /
• pp.3-24
• /
• 2001

The origin of raw materials of Angdeok-ni earthenwares was reasonably interpreted by the combination of data derived from mineralogical and REE analyses. Geoscientific analysis, including microscope observation, X -ray diffractometry analysis and rare ear

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.606-616
• /
• 2021

From the collection of the National Kimhae Museum, qualitative analyses using microscopic observation, SEM-EDS, Raman spectroscopy, FT-IR-ATR spectroscopy, and GC-MS were conducted on three burnished red potteries-Jeoksaekmaoyeonwa burnished red pottery (Neolithic age red pottery), Dandomaoyeonwan burnished red pottery(Bronze age red pottery) and Jeoksaekmaoyeongajimun burnished red pottery(Bronze age red pottery)-to investigate the components of the red pigments and the binder. After the layers of the primer were separated from the red surface, crystals of red pigment particles and minerals were found on the red surface. Through SEM-EDS, Raman estimates that the red pigment is Among soil pigments with iron oxide(Fe₂O₃) as the main color development source, Red Ocher(Fe₂O₃). A band characteristic of the Urushiol polymer was detected in the FTIR-ATRspectra(4000~600cm^-1), GC-MS analysis confirmed the presence of the benzenemethanol-2-prophenyl, 4-heptylphenol, 1-tetracecanol, heptafluorobutyric texidecane, all of which are the ingredients of the directional structure of the lacquer present in the red layer. Therefore, it seemed that the three burnished red pottery: Jeoksaekmaoyeonwan pottery(Neolithic age burnished red pottery), Dandomaoyeonwan pottery(bronze age burnished red pottery) and the Jeoksaekmaoyeongajimun pottery(bronze age burnished red pottery) made by mixing minerals and Red Ocher(Fe₂O₃), with lacquer.

• KOMUNHWA
• /
• no.69
• /
• pp.5-40
• /
• 2007

The research against Youngdong area Bronze Age settlement structure the condition where the investigation against the area and the remains which are limited becomes accomplished and Only the dwelling site will be investigated from the early settlement of most and recognition there is not a possibility which it will investigate synthetically. The Early settlement to the time which reaches the size of the settlement is small and From Bangnae-ri phases the house possession area increases inside the hill and it follows on south and if dwelling site numbers under increasing, from the aspect where the size of the settlement is magnified seems and it is a position. The Middle settlement currently was confirmed as the beginning from the room village A ruins, it investigates a settlement structure to, the increase of data is necessary. Is Pottery with clay stripes, phases the Later Settlement which Dwelling site, Storeage, Earthenware Kiln, Ditch enclosure and Tomb, the Public dwelling site back large scale Pottery with clay stripes settlement of formation will be investigated from Bangdong-ri settlements which correspond to Songhyun-ri settlement which is a hill characteristic settlement which is located in rivers circumference and the higShland characteristic settlement to provide the data the cultural aspect and character and a settlement structure of Bronze Age postscript and it will be able to grasp.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.170-187
• /
• 2020

Dolmens bearing the burial layout and stone coffin tombs of the late Bronze Age were excavated from Samdeok-ri, Goseong, Gyeonsangnsamdo, and grave items such as red-burnished pottery, arrowheads, and stone swords were also discovered. In the case of the red-burnished pottery that was found, it retains a pigment layer with a thickness of about 50 to 160㎛, but with most of the other items, exfoliation and peeling-off of pigment layers can be observed on the surface. The raw materials of the red-burnished pottery contained moderately sorted minerals such as quartz, feldspar, and hornblende, and partly opaque iron oxide minerals were also identified. In particular, the raw materials of the red-burnished pottery from stone coffin tomb #6 were different from those of the other pottery, containing large amounts of hornblende and feldspar. The pottery's red pigment was identified as hematite and showed similar mineral content of raw materials such as fine grained quartz, feldspar, and hornblende. The firing temperature is estimated to have been approximately 900℃, based on their mineral phase. The possibility exists that the raw materials had been collected from the Samdeok-ri area, because diorite and granite diorite with dominant feldspar and hornblende have been identified within 3km of that area. During the pottery manufacturing process, it is estimated that the pigment was painted on the entire surface of the red-burnished pottery after it had been molded and then finished using the abrasion technique. In other words, the red-burnished pottery was made by the process of vessel forming - semi drying - coloring - polishing. The surface and cross-section of the pottery appears differently depending on the concentration of the pigment and the coloring method used after vessels were formed. Most of the excavated pottery features a distinct boundary between pigment and body fabric. However, in the case of pottery in which fine-grained pigments penetrate the body fabric so that layers cannot be distinguished, there is the possibility that the fine-grained pigment layer was applied at a low concentration or immediately after vessel forming. Many cracks can be seen on the surface pigments in thickly painted pottery items, and in many cases, only a small portion of the pigment layers remain due to surface exfoliation and abrasion in the burial environment. It is reported that pottery items may be more easily damaged by abrasion if coated with pigment and polished, so it is believed that the red-burnished pottery of the Samdeok-ri site suffered from weathering in the burial environment. This damage was more extensive in the potsherds that were scattered outside the tomb.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.48-101
• /
• 2010

This paper estimated the calendar date of pottery with ring-rim(粘土帶土器) with the radiocarbon dating. This was based on archaeological facts with comparing line relations and radiocarbon dates of Yayoi pottery(彌生土器). As a result, I understood that pottery with circle ring-rim(圓形粘土帶土器) appeared in BC 6c, pottery with triangle ringrim(三角形粘土帶土器) appeared at the time in BC 300 . Based on the calendar date and aspect of ironware and pottery in grave, I kept in BC 4c with appearance date of ironware. And I kept in BC 5c with appearance date of the slim bronze dagger culture. Korea and Japan common chronological order were built for the first time based on radiocarbon dates, line relations of pottery with ring-rim and Yayoi pottery. This is the calendar date to date back approximately 100~300 years from the existing the calendar date. Current periodization does not match in the calendar date when I built it newly. Therefore I suggested it as follows. Early iron age is from the first~middle part BC 4c to BC 100. And the latter half of Bronze age is from BC 6c to the front appearance of ironware. Then Songguk-ri type(松菊里式) becomes staudard type of pottery in the middle stage of Bronze age.