• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.54-62
• /
• 2009

${Co_3}{O_4}$ and ${Co_3}{O_4}$-based thick films with additives such as ${Co_3}{O_4}-{Fe_2}{O_3}$(5 wt.%), ${Co_3}{O_4}-{SnO_2}$ (5 wt.%), ${Co_3}{O_4}-{WO_3}$(5 wt.%) and ${Co_3}{O_4}$-ZnO(5 wt.%) were fabricated by screen printing method on alumina substrates. Their structural properties were examined by XRD and SEM. The sensitivities to iso-${C_4}H_{10}$, $CH_4$, CO, $NH_3$ and NO gases were investigated with the thick films heat treated at $400^{\circ}C$, $500^{\circ}C$ and $600^{\circ}C$. From the gas sensing properties of the films, the films showed p-type semiconductor behaviors. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed higher sensitivity to i-${C_4}H_{10}$ and CO gases than other thick-films. ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film heat treated at $600^{\circ}C$ showed the sensitivity of 170 % to 3000 ppm iso-${C_4}H_{10}$ gas and 100 % to 100 ppm CO gas at the working temperature of $250^{\circ}C$. The response time to i-${C_4}H_{10}$ and CO gases showed rise time of about 10 seconds and fall time of about $3{\sim}4$ minutes. The selectivity to i-${C_4}H_{10}$ and CO gases was enhanced in the ${Co_3}{O_4}-{SnO_2}$(5 wt.%) thick film.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.101-106
• /
• 1998

Two types of CoMo/zeolite as well as $NiMo/{\gamma}-Al_2O_3$ were prepared and their activities and selectivities of low-temperature dibenzothiophene(DBT) hydrodesulfurization(HDS) were studied in high pressure fixed bed reactor. The HDS activities of CoMo/zeolites were higher than that of $NiMo/{\gamma}-Al_2O_3$ at temperatures below $225^{\circ}C$ while they were lower than that of $NiMo/{\gamma}-Al_2O_3$ at temperatures higher than $275^{\circ}C$. The main products from $NiMo/{\gamma}-Al_2O_3$ were biphenyl and cyclohexylbenzene. The product distribution of CoMo/zeolite catalysts was different from that of $NiMo/{\gamma}-Al_2O_3$. It is speculated that DBT is converted to alkylcyclohexane over zeolite based catalysts through both alkylation and hydrogenation reactions. The crystal structure of molybdenum was $MoO_3$ in fresh zeolite support while mixtures of $MoO_3$ and $MoS_2$ were observed in the aged catalyst.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.634-641
• /
• 2004

The photocatalytic performance of $TiO_2$ thin films coated on porous alumina balls using various aqueous $TiOCl_2$ solutions as starting precursors, to which 1.0 $mol\%$ transition metal ($Ni^{2+},\;Cr^{3+},\;Fe^{3+},\;Nb^{3+},\;and\;V^{5+}$) chlorides had been already added, has been investigated, together with characterizations for $TiO_2$ sols synthesized simultaneously in the same autoclave through hydrothermal method. The synthesized $TiO_2$ sols were all formed with an anatase phase, and their particle size was between several nm and 30 nm showing ${\zeta}-potential$ of $-25{\sim}-35$ mV, being maintained stable for over 6 months. However, the $TiO_2$ sol added with Cr had a much lower value of -potential and larger particle sizes. The coated $TiO_2$ thin films had almost the same shape and size as those of the sol. The pure $TiO_2$ sol showed the highest optical absorption in the ultraviolet light region, and other $TiO_2$ sols containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ showed higher optical absorption than pure sol in the visible light region. According to the experiments for removal of a gas-phase benzene, the pure $TiO_2$ film showed the highest photo dissociation rate in the ultraviolet light region, but in artificial sunlight the photo dissociation rate of $TiO_2$ coated films containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ was measured higher together with the increase of optical absorption by doping.

• Polymer(Korea)
• /
• v.31 no.1
• /
• pp.86-91
• /
• 2007

Polydimethylsiloxane branched HEMA (SH) was Prepared by reacting polydimethylsilorane prepolymer and 2-hydroxyethyl methacrylate (HEMA). Polyacrylate modified Polyorganosiloxane (SMPA) was prepared by polymerization of methacrylic acid(MA), allyl glycidyl ether(AGE), aminopro- pyltrimethoxysilane (APTS), and SH. Their structures were confirmed by the measurement of FTIR and $^1H-NMR$ and thermal properties of SMPA were studied from TGA. Residual weight of SMPA at $400^{\circ}C$ increased according to increasing content of the APTS to 63 from 55%. SMPA sealant was prepared by adding additives, such as viscosity increasing agent, crosslinking agent, and fillers. Adhesion characteristics of SMPA-3 sealant was determined to be maximum load elongation, 2.01 %, and break load elongation, 2.28%. Adhesion characteristics for SMPA sealant prepared from SMPA-3 were better than those for SMPA sealant prepared from SMPA-1 and SMPA-2.

• Microbiology and Biotechnology Letters
• /
• v.6 no.4
• /
• pp.149-153
• /
• 1978

A strain of Streptomyces sp producing chitinase was isolated from soil and its cultural condition and some properties of this enzyme were investigated. When 0.375 per cent of glucose was added to basal medium, this organism produced the most quantities of this enzyme after shaking culture at 3$0^{\circ}C$ for 48 hrs., while the production of the enzyme was repressed at the more concentration of glucose than that. The enzyme had a optimal pH of 7.0, optimal temperature of 5$0^{\circ}C$ and the activity of that was not decreased by heat treatment for 20 minute at 7$0^{\circ}C$. And then the activity was increased by Co$^{2+}$ but was slightly inhibited by Hg$^{2+}$, Ni$^{2+}$, Pb$^{2+}$.EX> 2+/.

• Microbiology and Biotechnology Letters
• /
• v.9 no.1
• /
• pp.7-19
• /
• 1981

The production of gluconic acid from glucose by the resting cell system of Aspergillus niger was studied. It was found that the conversion products from glucose by the resting cell system were markedly influenced by the pH, temperature, substrate concentration, aeration, metal ions, cultivation time and storage conditions of the resting cells. Conversion products were identified as gluconic acid by the thin layer chromatography and infrared spectrophotometry. These conversions were greatly stimulated by addition of $Mg^{++}$, and S $n^{++}$, but showed inhibitory effects by C $u^{++}$, H $g^{++}$, C $d^{++}$, A $g^{+}$ and cyanide. For the optimum cell storage, it was effective to be kept at -$25^{\circ}C$ in 0.05M phosphate buffer solution of pH 7.0. The gluconic acid production by the resting cell system was more effective than those of the fermentation with respect to cultivation time, yield, recovery and re-use of the cell.l.l.l.l.l.l.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.10
• /
• pp.1601-1605
• /
• 2004

To develop the functional food, methanol extracts of dried plantain (Plantago asiatica L.) was fractionated in hexane, chloroform, ethyl acetate, butanol and aqueous fraction. DPPH radical scavenging effect, reducing power, nitrite scavenging effect and antimicrobial activities of these fractions were investigated. Ethyl acetate fraction among these fractions showed the highest effect of all experiments. Ethyl acetate fraction showed about 60% scavenging effect on the DPPH radicals at 400 $\mu$g/5 mL. Nitrite scavenging effect of ethyl acetate and butanol fraction was more than 70~80% at concentration above of 500 $\mu$g. Among various solvent fractions from methanol extracts of plantain, ethyl acetate fraction showed the highest inhibitory effect on the microorganism such as Staphylococcus aureus, Bacillus cereus and Vibrio parahaemolyticus at 5 mg/disc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2524-2528
• /
• 2013

Cell opening characteristics dependent on the cell openers for the conventional formulation of a closed-cell polyurethane foam (PUF) was studied using 1-butanol and lithium salt of 12-hydroxystearic acid (Li-12HSA) as the reactive cell opening agents. While cell openining content of only 10.5 % was obtained for the sample with 4 phr of 1-butanol as the single reactive cell opener, that of 98.0% could be obtained for the sample with 2 phr of Li-12HSA as the reactive co-cell opener. As the results, it showed that a fully open-cell rigid PUF could be obtained by introducing a novel reactive cell opener, having a functional group able to form a bulky side-chain on the urethane networks, without severe loss of mechanical properties of the closed-cell PUF like cell size, bulk density, and thermal conductivity.

• Journal of the Korean Society of Groundwater Environment
• /
• v.6 no.4
• /
• pp.206-212
• /
• 1999

In order to evaluate the applicability of steel mill slag as a AMD (Acid Mine Drainage) neutralizer and to compare capacity of slag with that of limestone lab scale experiments were conducted. The fixed treatment experiments of AMD with slag and limestone separately for 24 hours under the stagnant condition showed that slag has higher capacity of pH increase and removal of Fe. Al and other trace elements. During the 10 days continuous step experiment the pH has been maintained and any decrease in the removal capacity of Fe and Al has not bun observed. In the trace element removal experiment slag showed higher capacity for removal of Ni, Co. Cu and Zn than limestone. The removal of trace element was more effective in AMD than in distilled water that the pH was adjusted to the same level of AMD (synthetic acid solution). It means that Fe and Al in AMD adsorbed trace elements during or after precipitation as oxide forms. In the size effect experiment, the slag of the smaller size with larger specific surface area exhibited higher capacity of pH increase and removal efficiencies of Fe. Al and other trace elements.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.11a
• /
• pp.22-22
• /
• 2001

전통적으로 초경합금은 무라까미 용액에서 에칭하거나 묽은 염산에 넣고 끓이는 방법에 의해 그 밋구조를 관찰하였다. 그러나 carbide 입자가 suvmicron 크기인 초경합금에서는 전통적인 에칭 방법으 에칭 후에도 입자/기지상, 입자/입자 입계를 동시에 구분시킬 수 있는 SEM 사진을 얻을 수 없다. 본 연구에서는 submicron 크기 초경합금의 고배율 SEM 사진을 얻을 수있는 90H2O2 - 10HNO3 (vol%)의 새로운 에칭 용액을 개발하였다. 경명의 submicron 크기 WC-Co 시편을 샐운 에칭 용액인 90H2O2 - 10HNO3 (vol%)에 넣고 약 6$0^{\circ}C$에서 약 12분 동안 에칭하였다. 에칭에 의해 Co 기지상은 빠르게 제기(dissolution)되었고, 동시에 표면의 WC 입자들은 각각의 결정학적 방향에 따라 천천히(slowly) 다른 속도로 부식(sissolution)되었다. 고배율 SEM을 관찰한 결과 WC/기지상 계면과 WC/WC 입계가 명화갛게 관찰되었다. WC 입자의 성장을 억제시키는입자성장 억제제(Cr3C2, TaC,VC)가 첨가된 WC Co 초경합금을 새로운 에칭 용액인 90H2O2 - 10HNO3 (vol%)에 넣고 약 6$0^{\circ}C$에서 약 12분동안 에칭하였다. 매우 작은 입자를 갖는 미세구조임에도 불구하고 고배율 SEM에서 WC/기지상 계면과 WC/WC 입계가 명확하게 관찰되었다. 90H2O2 - 10HNO3 (vol%)에서 Co 기지상이 빠르게 제거되는 것은 산 (acid)인 HNO3)에서 금속인 Co가 쉽게 녹기 때문이다. 동시에 WC 입자들이 각각 다른 속도로 에칭 된 것은 강력한 산화제인 H2O2가 각각의 WC입자 표면에 얇은 텅스텐 산화물 층을 형성시켰고 이들이 산인 HNO3에서 녹았기 때문이다. 본 연구에서 개발된 새로운 에칭 용액인 90H2O2 - 10HNO3 (vol%)의 에칭 원리가 똑같이 적용 가능한 다른 종류의 초경 합금에서도 사용이 가능할 것으로 판단된다.로 판단된다.