• Resources Recycling
• /
• v.7 no.2
• /
• pp.23-30
• /
• 1998

Aiming to rccycle the valuable mrnpunenl such as iron oxiiles and carbon from blast turnace sludge, [he physlco-chemical property and classification charactei~stics by hydrocyclone wcie invcstigxted. Carbon in sludge wils analysed to bo cxated mostly in coarse particles of sludge as a form of graphite whereas zinc lnortly in fine particles as zinc sulfides. On thc contrxy, iron oxides wne proved to be in the form of hematite, magnetile without any segregations according to particlc sizes of sludge. From the results of classiIication test using hydmcyclane of 75 mm dm, the recovcry and dczincificatian rate of low zinc sludge wcrc in the range of 67.9-73.6%, and 72.7-86 8%, respectively.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.365-367
• /
• 2008

원자로 냉각계통의 압력경계를 구성하고 있는 재료들의 부식은 재료 표면에 형성되는 산화막, 금속재료의 구성성분이 용해되어 생성된 가용성 화학종 및 산화물 입자 형태의 부식생성물들을 발생시킨다. 금속합금의 부식에 의한 가용성 화학종 및 입자들의 방출은 원자로 냉각계통에서 노심과 증기발생기를 순환하면서 연료피복관 위에 침전되어 여러 가지 문제를 야기한다. 크러드는 구조재료의 부식에 기인하여 발생한 부식생성물들이 냉각수에 부유하여 떠다니거나 피복관 표면에 침적하여 형성되며 주로 니켈과 철 산화물로 구성되어 있다. 원자로 냉각계통에서 크러드를 최소화하기 위하여 수화학 조건들을 제어하지만 장주기 고연소도 노심에서 AOA 현상을 일으키는 주된 원인이 되고 있다. 피복관 위에 침적되는 크러드는 붕소의 잠복위치를 제공할 뿐만 아니라 냉각수의 압력강하를 증가시키고 피복관의 부식 및 파손 원인을 제공하며 방사선 준위가 증가하도록 한다. 따라서 본 연구에서는 반응속도론적 관점에서 원자로 정지시의 용출 크러드 특성에 대한 연구를 수행하였다.

• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.637-643
• /
• 2007

In this report, we discussed the physiochemical characteristics of corn starch during the alkali gelatinization process. Here, solubility and the amounts of eluted polysaccharides and amyloses increased in proportion to the amount of alkali added. The X-ray diffraction patterns and DSC thermogram showed that in the early stage of alkali gelatinization, crystallinity of the starch granules was disrupted as compared with heat gelatinization. This resulted in the eluted amylose content, while granule sizes were hardly changed in the alkali treated corn starch. The endotherm peak in the DSC thermogram shifted toward a higher temperature region as the degree of gelatinization increased, suggesting that the retained starch granules were more compactly crystallized during alkali gelatinization than during the heat process. Thus, we concluded that during the alkali gelatinization of corn starch, the disruption of weak particles would occur first, before swelling of the granules.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.16 no.1
• /
• pp.43-48
• /
• 2006

In this Part 2, the grain growth processes of $Al_2O_3$ ceramics is numerically simulated using Monte Carlo method (MCM) and finite element method (FEM) and the pore sizes are analyzed. As the green ceramics whose thermal conductivities in high temperatures are generally low are sintered by the plasma heat and are rapidly cooled, the grain growth of the sintered body in the center is different from that in the outer. Also, even in the same sintering temperature, the pore size differs according to the pressing pressure. In order to prove the difference, the temperature distribution of the sintered body was analyzed using the finite element method and then the grain growth process associated with pressing pressures and relative densities was simulated using Monte Carlo method.

• Journal of Ocean Engineering and Technology
• /
• v.21 no.6
• /
• pp.42-46
• /
• 2007

The impact of a single wave generated by a dam break with a tall structure is modeled with a three-dimensional version of the Moving particle semi-implicit (MPS) method. The particle method is more feasible and effective than methods based on grid connection problems involving violent free surface motions. In the present study, the Tsunami impact load and the change of longitudinal velocity component around the structure, which are obtained from the numerical simulation, are compared to those from experiments.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.80-80
• /
• 2018

겨울철 대설 현상에 따른 도로 결빙과 항공기 운항 지연, 비닐하우스 및 가건물 붕괴와 같은 피해가 증가함에 따라 대처방안을 마련하는 일이 중요시 되고 있다. 이를 위해 정확한 적설 정보가 근본적으로 필요하지만, 문제는 적설량을 정량적으로 관측하는 일이 간단하지 않다는 점이다. 최근에는 무게식 우량계를 이용한 적설 관측이 수행되고 있지만, 강설량이 많을 경우 우량계가 눈에 덮이는 캐핑(capping) 현상으로 인해 제대로 관측하기 어려운 문제가 있다. 본 연구에서는 무게식 우량계의 이러한 한계를 보완하고 자료의 활용성을 높이기 위해 광학우적계(Parsivel)로 관측된 강설입자정보를 이용하여 적설량을 보정하는 방법을 제안하였다. 무게식 우량계 자료는 대관령 구름물리선도센터에 설치되어 있는 플루비오(Pluvio)의 적설 관측 자료를 이용하였다. 먼저, 관측된 플루비오 자료에서 단위 시간동안의 신적설을 산정한 후 과도한 관측값과 같은 노이즈를 제거하였다. 또한 플루비오와 동일 기간에 관측된 광학우적계 자료에 대해 강설 입자가 $10/m^3$ 초과로 나타나는 사상을 강수 기간으로 결정하고 두 자료가 모두 '0'인 경우 무강수로 나타냈다. 그 결과 강수 입자가 관측된 적설 기간에 플루비오가 우수하게 강설 사상을 관측하고 있음을 확인하였고, 부적합한 자료를 보정할 수 있었다. 이러한 방법으로 적설 자료를 개선할 경우 향후 레이더를 이용한 공간적 강설 추정의 정확도를 크게 개선할 수 있을 것으로 판단된다.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.3
• /
• pp.175-181
• /
• 2008

Cellolose nanoparticles loaded with retinyl palmitate were prepared by modified spontaneous emulsification solvent diffusion method. We used polysorbate 20, polysorbate 60, and PPG-26-Buteth-26/PEG-40 Hydrogenated castor oil as dispersion medium. The optimum condition for particle size of cellulose nanoparticles was 1w/v% ethyl cellulose with, 3w/v% polysorbate 60 solution. And The optimum condition for leading amount of retinyl palmitate of cellulose nanoparticles was 2w/v% ethyl cellulose with 1w/v% polysorbate 60 solution. Also, we found that this optimum condition can be applicable to other active compounds.

• Journal of the Korean Chemical Society
• /
• v.47 no.5
• /
• pp.479-486
• /
• 2003

In this study, poly(DL-lactide-co-glycolide) nanoparticles loaded with water-insoluble vitamins such as vitamin A (Retinol) and vitamin E acetate were prepared by the emulsification diffusion method. Polymer solution was prepared by the two water-miscible organic solvent, such as ethanol and acetone. Because of its biocompatible property, polyethyleneglycol-polypropyleneglycol diblock copolymer was used as surfactant and stabilizer. The influence of some preparative variables on the nanoparticle formation and on the loading efficiency of active agents, such as the type and concentration of stabilizing agent, the stirring methods, the water/oil phase ratio and the polymer concentration were investigated in order to control and optimize the process. After preparation of nanoparticles loaded with active agent, particle size and distribution were evaluated by the light scattering particle analyzer. The loading efficiency of active agents was evaluated by the UV-visible spectroscopy. As the results, particle size were 50-200 nm and dispersibility was monodisperse. The optimum loading efficiency of active agents was observed 50-60%. It was found that the appropriate of selections of binary solvent mixtures and polymeric concentrations in both organic and aqueous phases could provide good yield and favorable physical properties of PLGA nanoparticles.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.106-110
• /
• 2006

If drugs are made from nanoparticles, their formulations can be more effective than the conventional ones. Especially, water insoluble drugs having low absorption rates into our body could show improvement in their adsorption and bioavailability by decreasing their particle sizes to nanometers. In this study, polyvinylpyrrolidone (PVP) and various sugars were employed as stabilizers for the nanoparticles of a water insoluble drug, Itraconazole. Nanoparticles were successfully produced by the wet slurry process for five days. Then, spray drying converted the aqueous dispersions into dry powders, and the redispersibility of dried nanoparticles into water was investigated. The effects of temperature, pressure, and flow rate were studied to understand the importance of processing variables on redispersibility. It was found in particle size analysis that nanoparticles containing sugars have better redispersibility than those without sugars. Additionally, the mainly spherical morphology of dried nanoparticles was identified by SEM (Scanning Electron Microscopy) and AFM (Atomic Force Microscopy).

• Journal of the Korean Chemical Society
• /
• v.52 no.3
• /
• pp.266-272
• /
• 2008