• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.59-64
• /
• 2006

Ion exchange resin particles should not be found in steam generator(S/G) sludge. The suspicious spherical resin particles observed in S/G sludge sample were characterized for particle size distribution under optical microscope using the micro-technique, for element analysis by the electron probe micro analysis (EPMA), and for molecular identification by the IR spectroscopy. The particle sizes are distributed from 1 to $200{\mu}m$ for the sludge, while 40 to $500{\mu}m$ for the spherical resin particles. The results of the elemental analysis showed different major impurities: Si, Al, Mn, Cr, Ni, Zn and Ti for the sludge particles, while Si, Cu, Zn for the spherical resin particles. However, both particles contain Fe as a matrix of magnetite $(Fe_3O_4)$. IR spectrum of the spherical particles was not quite similar to the IR spectrum of ion exchange resins used in S/G system. These results indicate that the spherical particles are not related to ion exchange resin particles and may be formed by the process of the sludge formation.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.10
• /
• pp.17-28
• /
• 2015

The strict regulations on eco-friendly construction and the significant reduction of natural aggregate resources have raised public concerns on the utilization of recycled aggregates for backfilling a power transmission pipeline trench. In this paper, the particle breakage of concrete-based recycled aggregates and river sand has been experimentally studied during the standard compaction test. The applied compaction energy does not significantly break the river sand particles down, and thus causes no change in the compaction curve, thermal resistivity, and particle gradation characteristics. On the other hand, considerable particle breakage was observed in case of the three recycled aggregates. Such particle breakage leads to enhancing compaction effort, reducing thermal resistivity, and changing particle gradation curve with finer particles that are broken during the first compaction. In addition, particle breakage is more dramatic in lower water contents because pore water may damp down the compaction energy.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.121-125
• /
• 2023

Casein is a milk protein and one of the most important nutrients in milk. The composition is over 80% in cow's milk and about 20~45% in human's milk. Casein is highly biocompatible and biodegradable, so it has been studied for various biomedical materials applications as well as drug delivery systems. It is widely known that casein can be prepared as nanoparticles in the presence of the Ca²⁺ metal ion. Because casein is amphiphilic, hydrophobic drugs could be loaded inside to form a protein-based drug delivery system. In this study, we studied the optimum conditions for casein nanoparticle formation using natural metal ions present in the body, such as calcium, magnesium, zinc, and iron. It was confirmed that nanoparticles have a uniform size of around 150 nm and negative zeta potential values. In addition, it was demonstrated that casein nanoparticles have a cell viability of more than 80% and efficient intracellular uptake properties using confocal microscopy. From the results, it was also shown that the casein nanoparticles prepared using various metal ions have the potential to be biocompatible drug delivery carriers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1B
• /
• pp.85-91
• /
• 2012

Permeable Reactive Barriers (PRBs) using zero valent iron (ZVI, $Fe^0$) is a promising technology for in-situ remediation of trichloroethylene (TCE) forming dense non aqueous phase liquid (DNAPL). The objective of this study is to develop an enhanced treatment method of trichloroethylene-contaminated groundwater using ZVI packed bed with direct current (D.C.). A column experiment was performed to investigate degradation efficiency of TCE that was performed in three different combination of control (only sand), ZVI column (ZVI:sand, packing ratio 1:2(v/v)) and bipolar column (ZVI:sand=1:2(v/v) with electric current) in the test columns. As the results of this study, the degradation efficiency of TCE was improved with simultaneous application of both bipolar column compared to that used ZVI column. Because ZVI particles are isolated and individual particles act like small electrodes. In this experiment, it was indicated a basic material for application of bipolar packed bed as electro-PRBs that was effective degradation of TCE.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.240-242
• /
• 2005

본 연구에서는 생활폐기물 소각장에서 발생하고 있는 바닥재를 이용하여 각 입도에 대해 자력의 세기에 따라 철/비철선별 하였다. 자력의 세기에 따른 분리량과 분리된 산물의 철함 유량을 조사함으로써 자력 및 비철 효율을 파악하고자 하였다. 또한, 비철 선별기를 사용하여 비철 선별 효율을 조사하였다. 자력선별결과, 자력의 세기가 증가할수록 자력선별에 의해 분리량이 증가하였으나, 분리된 산물의 철함유량은 감소하는 경향을 나타내었다. 이러한 결과는 자력세기의 증가가 철회수량의 증가보다는 불순물의 혼입량을 증가시키는 것으로 생각된다. 비철의 경우, 입자크기가 커짐에 따라 분리율이 높았으며, 4.75mm이상에서는 대부분의 비철이 회수되었다.

• Journal of the Mineralogical Society of Korea
• /
• v.3 no.2
• /
• pp.79-88
• /
• 1990

고령토의 조직과 산출상태의 관찰결과 산화철 광물을 침전시킨 철의 주요 근원은 모암인 회장암에 함유된 각섬석과 녹니석이다. X선 회절 분석결과 침철석은 녹니석이 버미큘 라이트로 변질되고 각섬석이 용해되기 시작하는 하부 백색 광석에서 우세하며, 적철석은 각섬석, 녹니석 및 버미큘라이트가 심한 용탈작용을 받는 상부 적갈색 광석이나 열 개에서 침철석과 함께 산출된다. 침철석 및 적철석내 Fe에 대한 Al의 치환량은 각각 6~26 mol% 및 5~8mol%이며 이 두 값 사이에는 비례 관계가 있다. 회절선폭의 크기로부터 계산된 침철석과 적철석의 평균 입자크기는 340$\AA$ 이하이며 침철석은 약간의 침상을 보이는 반면 적철석은 탁상이다. 전자현미경 관찰에 의하면 버미큘라이트와 수반되는 침철석은 침상 또는 성상이나 적갈색 광석에서는 그러한 특징이 작다. 적철석은 육각 또는 원형을 보이나 상부 적갈색 광석에서는 보다 불？칙한 모양이다. 적철석과 침철석의 광물학적 특성을 합성실험에서 보고된 결과들과 비교하여 성인적 측면에서 논의되었다. 이 지역에서는 침철석과 적철석의 생성에 적합한 기후조건들이 중첩된 것으로 생각된다.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.25-31
• /
• 1994

The magnetic properties of aluminum anodized film in which Co-Fe alloy electrodeposited are investigated with regard to the alloy composition of magnetic films. The electrodeposited Co-Fe particles are confirmed to be single phase Co-Fe alloys by X-ray diffractions. At 34 at% Co, the sample with small pore diameter(particle diameter $150\;{\AA}$) has a large magnetic energy product($B_{max}$) of about 1.44 MGOe due to the large saturation magnetization, the high coercive force and good squareness of the M-H curve. However, for the samples with particle diameter larger than $450\;{\AA}$, the bottom of each particle forms abnormal particle claaed branch-shaped unlike the sample of the particle diameter $150\;{\AA}$. In this case, the magnetic anisotropy energy was about zero at the compositions of 45 and 75 at% Co. Moreover, at the compositions from 50 to 70 at% Co, the anisotropy became negative value. This means that an easy axis of magnetization of the film is in plane in plane in spite of the perpendicular shape anisotropy of the particle. It was found that the bottom extremity of the particle contains FeC from the X-ray diffraction. Thus the effect of the bottom extremity, that is, an unusal magnetic property was removed by electrodepositing Cu at the bottom extremity of the particle. Itis clear that the magnetic properties of the ilms are influenced by he branch-shaped bottom extremity filled with FeC.

• Journal of the Korean Magnetics Society
• /
• v.21 no.5
• /
• pp.157-162
• /
• 2011

The effect of ferrous/ferric molar ratio and precipitants on the formation of nano size magnetite particle was investigated by coprecipitation method. Ferrous sulfate and ferric sulfate were used as iron sources and sodium hydroxide and ammonium hydroxide was used as a precipitant. Single phase magnetite was synthesized with all of experiment conditions (ferrous/ferric molar ratios and precipitants). Particle size was smaller, and particle size distribution was narrower when NaOH was used than $NH_4OH$ was used. The crystallinity and particle size was increased and narrower particle size distribution with increasing molar ratio ferrous/ferric sulfate with the same precipitant. Super paramagnetism could be obtained at all of experiment conditions. The highest saturation magnetization (72 emu/g) was obtained when the ferrous/ferric molar ratio was 2.5 and precipitant was used $NH_4OH$.

• Economic and Environmental Geology
• /
• v.53 no.4
• /
• pp.347-362
• /
• 2020

Iron (hydro)oxides in aqueous environments are primarily formed due to mining activities, and they are known to be typical colloidal particles disturbing surrounding environments. Among them, hematites are widespread in surface environments, and their behavior is controlled by diverse factors in aqueous environments. This study was conducted to elucidate the effect of environmental factors, such as ionic composition and strength, pH, and natural organic matter (NOM) on the behavior of colloidal hematite particles. In particular, two analytical methods, such as dynamic light scattering (DLS) and single-particle ICP-MS (spICP-MS), were compared to quantify and characterize the behavior of colloidal hematites. According to the variation of ionic composition and strength, the aggregation/dispersion characteristics of the hematite particles were affected as a result of the change in the thickness of the diffuse double layer as well as the total force of electrostatic repulsion and van der Walls attraction. Besides, the more dispersed the particles were, the farther away the aqueous pH was from their point of zero charge (PZC). The results indicate that the electrostatic and steric (structural) stabilization of the particles was enhanced by the functional groups of the natural organic matter, such as carboxyl and phenolic, as the NOM coated the surface of colloidal hematite particles in aqueous environments. Furthermore, such coating effects seemed to increase with decreasing molar mass of NOM. On the contrary, these stabilization (dispersion) effects of NOM were much more diminished by divalent cations such as Ca²⁺ than monovalent ones (Na⁺), and it could be attributed to the fact that the former acted as bridges much more strongly between the NOM-coated hematite particles than the latter because of the relatively larger ionic potential of the former. Consequently, it was quantitatively confirmed that the behavior of colloidal hematites in aqueous environments was significantly affected by diverse factors, such as ionic composition and strength, pH, and NOM. Among them, the NOM seemed to be the primary and dominant one controlling the behavior of hematite colloids. Meanwhile, the results of the comparative study on DLS and spICPMS suggest that the analyses combining both methods are likely to improve the effectiveness on the quantitative characterization of colloidal behavior in aqueous environments because they showed different strengths: the main advantage of the DLS method is the speed and ease of the operation, while the outstanding merit of the spICP-MS are to consider the shape of particles and the type of aggregation.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.129-136
• /
• 2005

There should not be ion exchange resin particles in S/G sludge. The suspicious spherical resin particles observed in S/G sludge sample were characterized for particle size distribution under optical microscope using the micro-technique, for element analysis by the electron probe micro analysis (EPMA), and for molecular identification by the IR spectroscopy The particle sizes are distributed from 1 to 200 ${\mu}m$ for the sludge, while 40 to 500 ${\mu}m$ for the spherical resin particles. The results of the elemental analysis showed different major impurities: Si, Al, Mn, Cr, Ni, Zn and Ti for the sludge particles, while Si, Cu, Zn for the spherical resin particles. However, both particles contain Fe as a matrix of hematite ($Fe_{3}O_4$). IR spectrum of the spherical particles was quite different from that of ion exchange resins used in S/G system. These results indicate that the spherical particles are not related to ion exchange resin particles and formed by the process of the sludge formation.