• Proceedings of the KSR Conference
• /
• 1998.11a
• /
• pp.24-29
• /
• 1998

To absorb the deformation of ,external live load, thermal gradient, shrinkage and creep in bridge structures and general structures, expansion joint has to be established. Especially expansion joint for high-speed railway bridge has to accomodate the static and dynamic forces and it not only has the durability of itself but also maintain the durability of structure by preventing the leakage of water. The actual used product of expansion joint for high-speed railway bridge is only ones made in France, Germany and Japan. In this study, the development process and test results of developed expansion joint are introduced which has the functional operation and durability enough to apply to high-speed railway bridges, roadway bridges and general structures. The tests consist of fatigue-durability test of 3 million times by high-speed rail load, leakage test and jack-up test for verifying the possibility of exchanging it. The performance of developed expansion joint satisfy the specification of Korea High Speed Rail Construction Authority.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1034-1035
• /
• 2008

최근 들어 열차의 고속화, 고성능화 추세에 맞는 철도의 안전성 확보가 더욱 필요해졌다. 이를 달성하기 위해서는 각 전기장치들에 대한 종합적인 시험평가가 이루어져야 한다. 특히 완성차 및 본선시운전 시험을 통해 차량에 대한 여러 상태를 확인해야 한다. 그 중에서도 차량 네트워크 신호는 인간의 두뇌에 해당되는 매우 중요한 시스템이다. 이 신호를 취득하기 위해 계측시스템을 개발하여 차량의 주요신호들을 비교 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.369-371
• /
• 2001

본 논문에서는 경량전철시스템 기술개발사업에서 개발하고자하는 차량시스템, 신호제어시스템, 전력공급시스템 및 선로구축불의 목표신뢰도를 정의하였다. 이 목표신뢰도의 배분은 국내지하철의 고장유형 및 철도분야에 축적되어있는 고장율을 바탕으로 작성되었다. 특히, 차량시스템분야는 보다 자세히 목표신뢰도를 배분하였다. 이러한 목표신뢰도 배분을 통하여 경량전철 시스템의 각 개발단계마다 이루어지는 개발활동(설계, 제작 및 구매)의 검증을 수행하여야 신뢰성을 확보한 경량전철시스템개발이라는 궁극적인 목적을 달성할 수 있다. 목표신뢰도 배분에 맞추어 경량전철시스템개발동안 제동장치, 추진장치, 출입문장치, 제어장치 등 고장시 열차의 운행을 정지시킬 수 있는 구성품에 대한 신뢰도를 모델링하여 신뢰도 예측 및 분석하고 이에 맞추어 설계검증 및 보안을 한다. 또한 경량전철시스템의 시험선로에서의 주행시험을 통하여 국내 경량전철시스템에 적합한 신뢰도 기준을 마련하고자 한다.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1309-1315
• /
• 2004

The harmonic current originated from electric cars will be cause of electromagnetic interference along adjacent communication cables and troubles with signaling. It will also cause overheating in power capacitor and malfuction in protection relay. Therefore, it brought actual measurement of harmonic current by each operation mode. Because the result exceeded the value prescribed by Korea Electric Power Corporation, we constructed facilities reducing harmonic current on overloaded part at each power supply station located in conventional line (Guro, Kyungsan, and Milyang) as an optimal alternative. Then, this study compared and analyzed the reducing effect before and after constructing facility.

• Journal of the Korean Society for Railway
• /
• v.12 no.3
• /
• pp.405-411
• /
• 2009

Railway signaling system in a rapid transit using the ATC system the approved a speed limit to a train and a part of signaling system in a metro approved a distance which is possible to move. Referring to the way of transmitting train control information, there are the one transmitting it to the on-board system of a train using the direct track, the another transmitting it establishing an instrument, and the other transmitting an instrument by a railway track. The one is the method using the direct track as a conductor for composing the part of the track and attaining the information controlling a train by transmitting a signal to the track. It is used for the high-speed railway and the subway. The method using the track attains information by transmitting it to returned information, and the on-board system of a train attains it by magnetic coupling. Because many reinforcing bars on the concrete slab track are used, interaction between a rail and a reinforcing bar that is not produced on ballast track is made. Due to the interaction, the electric characteristic of rail is changed. In the current paper, we numerically computed the coupling coefficient between the rail and the reinforcing bar based on the concrete slab track throughout the model related to the rail and the reinforcing bar using the concrete slab track that is used in the second interval of the Gyeongbu high-speed railway, and we defined the coupling coefficient not changed in the electric characteristic of rail in the condition that there is no interaction between the rail and the reinforcing bar.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.233-241
• /
• 2018

Recently, integrated railway safety monitoring and control system, which is a convergence system based on data distribution service for railway safety monitoring and control, is under development. It collects safety data of vehicle, signal, power and safety monitoring facilities in real time and adopts communication middleware based on distributed service for mass data processing. However, in the case of a server device used as an existing control server, the performance of the distributed service middleware can not be exhibited due to low hardware performance due to safety reasons. In the safety control system, 200,000 packets per second were set as the transmission target, but the performance test of the LAB was not satisfied. In this paper, we analyze the characteristics of railway data to improve the data collection performance of existing equipment and apply DDS-based streaming transmission method to the data model of signal facilities and vehicle facilities with large packet amount according to the analysis result. As a result, it was confirmed that the throughput was improved about 30.4 times when the hardware performance was the same. We plan to improve the data processing performance by applying it to real-time railway safety integrated monitoring and control system in the future.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.159-169
• /
• 2016

The current railway control system in Korea is comprised of signaling, electric rail power, communication, and maintenance systems that are independent of each other. Further, these systems have different mediums and protocols for transmitting the field equipment data to the central control system. The Safety Supervision System has as its purpose the collecting of safety-related data from each system to predict and prevent accidents, this system utilizes standard protocol. Safety-related data need to be collected from field data transmission devices of the existing control system, the data should be collected without affecting the communication of the existing system. In this study, sniffing skill, which is typically used for network traffic monitoring or security, is used to collect data. The problems arising from the use of sniffing devices are noted, and the Packet Conversion Node is proposed as a solution to the problems. Further, functional and performance testing were completed for the prototype, and the software architecture and packet conversion process were verified.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.670-677
• /
• 2009

This paper is a study of testing on-board signalling equipment in advanced high speed rail at the maximum speed of 400km/h. The on-board signalling equipment in advanced high speed rail provides operating information to the driver when operating at ATC, ATS, and ATP sections, and maintains safety from driver oversight, signalling equipment malfunction, natural disasters and so on. Since the testing train performance of advanced high speed rail at 400km/h must include the function test of on-board signalling equipment, this thesis focuses on the function test of on-board signalling equipment and analyze the necessity of the test at the maximum speed. Finally, it is suggested to change some infrastructure and to use specific test methods to test the train performance at the maximum speed in high speed line ATC section.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.245-247
• /
• 2004

고속철도는 수많은 하이테크 기술의 결정체이며, 이 중에서도 추진장치는 차량의 성능을 결정하는 매우 중요한 요소이다. 이러한 전장품들에 대한 다양한 성능을 평가하고 진단하기 위해 상시계측시스템을 구축하여 활용하고 있다. 이러한 계측장비들은 여러 전장품에 대한 계측 및 분석을 통한 시험평가와 동시에 완성차 시험이나 본선시운전 시험시에 발생할 수 있는 고장원인을 찾아내고 해결하는데 많은 도움을 주고 있다. 본 논문에서는 강시계측 시스템을 통해 추진장치에 대한 고장진단을 실시한 내용에 대하여 기술하였다.

• Information and Communications Magazine
• /
• v.32 no.12
• /
• pp.38-44
• /
• 2015

국내 철도 지선 구간에서는 열차 운행 빈도와 승객 이용률이 저조하여, 기존 열차제어시스템의 유지보수 비용을 최소화하고 운영 효율성을 향상시킬 필요성이 대두되었다. 이에 따라 고가의 지상신호 제어장치 대신 차상에서 선로변 시설물을 무선으로 제어하고자 하는 차상중심 열차제어시스템이 개발 중이다. 본고에서는 차상중심 열차제어시스템의 개념과 운영을 위한 고려 사항 및 현재 개발 동향을 살펴본다.