• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.487-494
• /
• 2000

For the rail fastener clip shoulder being used in Pandrol e-cilp type fastening system, there has been a need to make a structural and electrical improvement due to the fact that PC concrete sleeper showed material loss in the vicinity of exposed portion of the clip shoulder and the fact that track signal was lost when a track insulation block is missing on the track. In the present study, a new lightweight rail fastener clip shoulder with enhanced electrical insulation capability is developed

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.170-175
• /
• 2003

The korean high speed train(350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2015.01a
• /
• pp.255-258
• /
• 2015

LTE 통신 환경에서 핸드오버 기법은 이동장치가 120km/h 이하의 속도에서 원활한 핸드오버가 이루어진다. 하지만 그 이상의 속도로 이동시, 핸드오버가 지연되거나 실패하고 Ping-pong효과가 발생하는 문제점이 있어 이동장치의 원활한 신호수신을 방해한다. 본 논문에서는 새로운 핸드오버 기법을 이용하여 120Km/h이상의 고속으로 이동하는 고속철도나 자가용에서도 이동장치가 원활한 신호 수신을 할 수 있도록 적절한 중계기에 핸드오버가 이루어지도록 하여 현재 이동장치의 상태를 파악한 뒤 고속, 저속 핸드오버를 상황에 맞게 결정하는 핸드오버 기법을 제안한다.

• Journal of the Korean Society for Railway
• /
• v.1 no.1 s.1
• /
• pp.10-19
• /
• 1998

Described in this paper is the software to design of a railway interlocking table, which describes the functional specifications of an interlocking device. Interlocking tables has been designed mainly based on personal expertise among signal engineers. However, this expertise needs to be analyzed with technical uniformity and integrated in an organized system. The proposed software is amount to the signal engineer's expertise, yet a generalization of interlocking reasoning. The algorithm is based on the train route setting principle, and is applicable in solving practical problems by computers. The software was evaluated through man-made and machine-made interlocking tables are compared. The evaluation results proves the software to be effective for computer control of the signaling system as interlocking system with a much improved safety.

• Journal of the Korean Society for Railway
• /
• v.5 no.2
• /
• pp.104-111
• /
• 2002

The purpose of interlocking system was to prevent the route for a train being set up and its protecting signal cleared if there was already another, conflicting route set up and the protecting signal for that route cleared. This paper proposed Interlocking Inspection System(IIS) consisting of interlocking simulator and field simulator to operate interlocking test of computer based Electronic Interlocking System(EIS) in this paper. Interlocking simulator consists of Design Edit System(DES), Logical Database Management Tool(LDMT) and real-time confirming system, field simulator is a equipment to simulate a control object of EIS and constitutes configuration operated in 19 inch standard rack. As a result of test to prove capacity of this IIS, the efficiency was shown as excellent. Therefore by using inspection system, we obtain every advantages. It has the functions for test data generation and automatic test execution based on personal computer. Time and cost for test work can be reduced more efficiently by using this developed inspection system

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.164-169
• /
• 2003

Recently, as the road capacity reaches the limit and environmental problems becomes serious, there is gradually increased a need for railroad vehicles that are environment-friendly and have time regularity, reliability and safety. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. We developed the hardware and software of the measurement system for on-line test and evaluation of korean high speed train. The software controls the hardware of the mesurement data and acts as interface between users and the system hardware. In this paper, we is studied for electric apparatus performance of railway vehicle using sensor. In order to this test is developed signal conversion system. Using this system, we obtained important result for pantograph voltage, battery voltage, axle speed, and inverter current.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.441-445
• /
• 2008

LRT is eco-friendly transportation system and can be constructed at less than half cost of subway. Therefore many local governments have planned to construct a various type of LRT and some of them were already under construction. In Para. 2 of Art. 22 of the "Enforcement Decree of Urban Railroad Act" - safety standard of urban railroad vehicle, It can't be operated if "structures and devices" don't come up to standard required to safety operation. Constructor or operator should give an order or operate according to safety standard in Art. 3 of the Safety Standard of Urban Railroad Vehicle. Safety Standard of Urban Railroad Vehicle of 2000 was reformed once to tighten fire safety standard in 2004 after subway accident in Daegue. It was entirely made for medium and large-sized electric motor car. LRT, based on driverless operation and articulated bogie, has different safety standard in signalling devices and the axle load. etc. So many institutes related LRT have required to amend. In this paper, we described features of LRT vehicle and necessity of amendment and discussed how it should be amended.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.579-587
• /
• 2008

Promotion of the line no.2 in Seoul Metro was changing from the existing signaling facilities for ATS(Automatic Train Stop) vehicles to the up-to-date signaling facilities for ATO(Automatic Train Operation). But, in consequence of conducting a trial run after being equipped with the ATO signaling facilities, the matter related to mix-operation with the existing ATS signaling facilities appeared. The operation of the existing ATS signaling system in combination with the ATO signaling system has made improper working related to frequency recognition of the ATS On-board Computerized Equipment. This obstructs operation of a working ATS vehicle. That is, as barring operation of an ATS vehicle that should proceed, it may make the proceeding ATS vehicle stop suddenly and after all, it will cause safety concerns. In this paper, we designed a wayside track occupancy detector that previously prevents improper working related to frequency recognition of the ATS On-board Computerized Equipment by gripping classification and working processes of operating trains throughout transmission of local signaling information from the existing facilities, which does not need to change or replace the existing signaling facilities. Furthermore, we described general characteristics of the wayside track occupancy detector and modeled the IFC(InterFace Contrivance) device and the logical circuit recognizing signal information. Then, we made an application program of PLC(programmable Logic Computer) based on the stated model. We, in relation to data transfer method, used the frame in TCP/IP transfer mode as the standard, and we demonstrated that ATO transmission frequency is intercepted.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.350-353
• /
• 1998

In this paper, a wayside signaling emulator systems developed for testing to carbone ATC/ATO/TWC systems adopted in SMRT(Seoul Metropolitan Rapid Transit Coperation) line 7, 8 is presented. Informations that are required to train movement with driverless, such as stations status, destination station, restriction speed and train modes are provided through the wayside signaling emulator. The developed emulator systems can be constructed to 1.5km testing tracks and the end points of track, are emulated to the arbitrary stations in SMRT line 7, 8.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2010.10a
• /
• pp.345-348
• /
• 2010

수배전반, 반도체 설비장치가 있는 FAB, 그리고 철도 전원실에 설치된 신호 전원 공급장치 및 정류기 내부에 화재발생 위험성이 내제되어 있으나, 기기 내부에 소화 장치가 설치되어 있지 않아서, 화재발생시 기기소실에 따른 1차 피해뿐만 아니라, 2차 피해가 막대하다. 이러한 문제점을 해결하고자 본 연구에서 제안하는 수배전반용 발화점감지 튜브 소화장치는 화재발생시 일정한 온도가 되면 튜브가 녹아 가스가 방출되면서 소화용기내의 소화약제가 방출되어 화재를 진압하는 장치로써 전력의 공급 없이도 화재의 감지 및 소화가 가능한 자동소화장치이다. 본 논문에서는 수배전반용 발화점 감지 튜브에 적합한 소화기를 개발하기 위해 소화기를 재설계 하였다.