• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2906-2910
• /
• 2015

The alignment modifications after completion of railway construction entail a lot of efforts and time as well as high additional costs. In the process of renewal of the existing railway alignment to offer higher-speed services, the effect of initial design parameters(e.g., intersection angle) on determination of allowable degree of improvement of horizontal curves under consideration of economic efficiency is investigated in this study. From the analysis results, in the case that there are obstacles at the tangent line, it was found that the larger angle of intersection has a significant effect on the permissible zone. In addition, as the intersection angle is increased, the permissible values of maximum curve radius and the length of transition curve becomes smaller and longer, respectively. It is expected that this study can contribute to the efficient and accurate prediction of the permissible zone according to the locations of obstacles and the size of intersection angle as well as improvement in the railway alignment without any additional costs.

• Journal of the Korean Society for Railway
• /
• v.13 no.6
• /
• pp.589-594
• /
• 2010

Superimposition of horizontal and vertical curves may hamper the ride comfort and running stability of train and largely affect the maintenance costs. However, in many cases, it is not easy to make a track alignment plan because of the geographic conditions or undesirable environmental factors. In this paper, a comparative study on the effect of superimposition of vertical and horizontal curve on the ride comfort and optimum horizontal curve conditions was performed. That is, optimal cant and ride comfort analysis with and without a vertical curve superimposed on the horizontal curve were evaluated. Also the superimposition effect on ride comfort and alignment conditions in high speed zone were evaluated. From the analysis results, it was found that the ride comfort is similar to that at the only horizontal curves when applying the compensation cant for the superimposed site.

• Proceedings of the KOR-KST Conference
• /
• 2003.02a
• /
• pp.75-93
• /
• 2003

Hub-and-spokes전략은 교통분야에서 널리 이용되는 네트워크전략이지만, 철도의 경우 대개 이 전략을 이용하기 어려운 네트워크구조를 가지고 있어 그 적용사례를 찾아보기 어렵다. 그러나 유럽에서는 철도망이 도로망처럼 조밀하게 형성되어 있다는 점과 환적 처리기술의 발달로 90년대 초부터 이 전략이 철도화물운송부문에도 도입되기 시작했다. 이러한 관점에서 본 논문은 철도화물운송망에서의 hub-and-spokes전략을 구현하는 서비스네트워크 디자인모형을 개발하고, 모델의 실제철도망에의 적용성을 평가한다. 개발되는 모형이 전략모형임에도 불구하고 모형에서는 일반화된 운영비용 외에 열차속도, 서비스빈도, 터미널에서의 화물처리속도 등에 따른 시간지체비용도 고려되었다. 시간지체비용의 고려에 따라 야기되는 비선형 목적함수는 빈도별 서비스결정변수의 설정을 통해 선형화되어 결과적으로 모형은 선형 binary정수 최적화문제로 표현되었다. 규모가 큰 네트워크의 경우 해도출의 어려움 때문에 본 논문은 전체문제의 분할(decomposition)에 기초한 휴리스틱방법((heuristic method)으로 해결한다. 해도출의 효율성을 높이기 위해 서비스빈도개선과 관련하여 세 알고리즘이 개발되었다. 개발된 알고리즘은 유럽의 실제네트워크를 기초로 도출한 4개의 테스트문제에 적용되어, 해의 정확도와 해 도출의 효율성이 비교·평가되었다.

• Journal of the Korean Society for Railway
• /
• v.10 no.6
• /
• pp.685-691
• /
• 2007

In this paper through Honan high-speed railroad which is planned with the north and south axis, we will verify the feasibility of the coordinate conversion using railroad control points after regarding current planned-railroad as the linear central axises. From analysis, distortion of Y axis varies 21 cm to 40 cm diminishing to a gentle straight line, distortion of X axis varies 14 cm to 29 cm. Through a revision, the deviation value between the coordinates were 6 mm to 9 mm and it satisfied the allowable error of national geographic information institute which is following ITRF (International Terrestrial Reference Frame) and cadastral boundary survey (10 cm). consequently the coordinate conversion is possible using railroad control points as common control points.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.5
• /
• pp.59-66
• /
• 2002

Long-rails in railways and high-speed railway are subjected to additional stresses resulted from the displacements inconsistence between upper structures, and this phenomenon is more remarkable in continuous bridges than in simple bridges. For the sake of safety, railways have to guarantee trains to stop safely without derailment even in the event of earthquake. The influences of acceleration, braking, and temperature were analyzed by static nonlinear method. But earthquake loads that require dynamic nonlinear analysis are not considered in these methods. Because linear relation between relative displacements of decks and rail stresses is not guaranteed at the nonlinear systems such as long rails on the bridges, it is required compute to rail stresses considering both braking and earthquake load by nonlinear dynamic analysis method. In this study, dynamic analysis method with material non-linearity for rails on continuous bridges according to the Taiwan High Speed Railway(THSR) Design Specification volume 9 was developed. And additional stresses and displacements of long rails for acceleration, braking, and earthquake loads were analyzed by this method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.507-514
• /
• 2017

As BIM has been widely used in the field of architecture, efforts to apply BIM to civil engineering structures are increasing rapidly. Since commercial BIM softwares are focused on building structure, it is difficult to apply to alignment-based civil infrastructures. In this study, we proposed a method to generate an information model that reflects cant by sharing information between alignment-centered modeling tools and BIM authoring tools to manage information of railway track. The railway track modeling process consists of classifying structures into continuous and non-continuous structures, creating continuous structures by alignment-centered modeling tools, and using the shared alignment information to generate information model of the non-continuous structures. Non-continuous structures were generated by an algorithm that calculates the position and rotation information of each structure based on discretized railway alignment and cant information transmitted to the BIM authoring tools. The availabilities of proposed method were studied by applying to the osong test-line. Using the test model, it was shown that the objects were identified, the properties were extracted, and the quantities of each structure were calculated.

• Railway Journal
• /
• v.14 no.1
• /
• pp.38-41
• /
• 2011

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.391-400
• /
• 2004

Railway curved zone have crucial effects on the speed of train. Length of transition curve is one of the important factor for alignment compatibility estimation in this sections, this value is decided by running speed and Cant. In this study, the extension method of transition curve is evaluated, based on the alignment of Jang Hang-Line, investigated field conditions of the sections in the curves exist. This research result show that changing of transition curve was proved by necessary to approximately two thirds of the curved sections, and method of fixing central point of track centerline and changing radius of curvature minimize the maximum shift in track centerline and deviation of radius, and also may be effective method for alignment suitability and speed up in case overall improvement is difficult.

• Journal of the Korean Society for Railway
• /
• v.13 no.3
• /
• pp.309-316
• /
• 2010

When the horizontal and vertical curves are superimposed in railway alignments, which affects the running stability, ride comfort, and track maintenance costs. However, when designing new lines or realigning existing ones, there are many cases of superimposition caused by the existing fixed points (bridge, tunnel, turnout, and catenary system, etc) on the conventional lines and undesirable impacts on the environment, etc. In this study, when the horizontal and vertical curves are superimposed, in order to optimize the horizontal curve in aspect of the ride comfort, the object function was developed and verified by vehicle dynamic analysis. Also, the solution algorithm for simplified evaluation method was presented.

• Journal of the Korean Society for Railway
• /
• v.12 no.4
• /
• pp.472-480
• /
• 2009

The stability analysis for CWR is difficult in the theory itself because both geometric and material nonlinearity should be considered. Also the analysis results are varied according to the loading history. In contrast to the complexity in the theory, the analysis results for CWR on the railway bridges are quite simple and can be predicted because of a small buckling effect and its negligible nonlinearity. In this study, refined nonlinear analysis methods for the stability analysis of CWR on the railway bridges were developed which consider only material nonlinearity beeause the effects of geometric nonlinearity are nominal. In this study, the analysis results can be found within limited number of iterations with idealized linear force-displacement relationship. From the analysis result comparisons, it was found that the stability analysis for CWR on the railway bridges can be performed effectively by this method.