• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.263-278
• /
• 2022

This paper contains experimental study for the development and performance of TBM backfill material with thixotropic properties. The LW backfill material is widely applied to fill the cavity on the back side of the shield TBM excavation, but has disadvantages such as settlement caused by strength reduction, material separation by groundwater, and reduced plasticity. In this paper, laboratory tests and a model test were conducted to assess the performance of inorganic thixotropic backfill material proposed to improve these problems. The results of laboratory tests show that 1 hr-uniaxial compressive strength of ITB was 12 times higher than LW, and the rate of bleeding of 20 hr was 8.3 times lower, and the result of flow table test was more than 27 times higher. This result indicated that the inorganic thixotropic backfill material has superior properties to LW backfill in terms of strength reduction, material separation, and thixotropy. In the model experiment, a model injection device tester was manufactured and the injection performance and filling rate were verified. When material was injected in the water, it was visually checked whether material separation occurred, and it was confirmed that the filling rate was 96% or more. Comparison results with the test of LW and ITB materials was concluded that ITB can reduce the material separation by groundwater and the occurrence of tunnel cavity.

• Journal of the Korean Society of Safety
• /
• v.37 no.1
• /
• pp.64-69
• /
• 2022

The study measured a subway construction worker's Macpa stress by Heart Rate Variability measuring instrument and conducted a survey of Korean job stress from subway construction workers. Also, the study analyzed the relationship between Macpa stress index and Korean job stress result and suggested managing stress method for each item. According to National Statistical Office data, the first line subway in Seoul was started to open in 1974. The extended total length is 996 kilometers until 2019. Many aged workers are currently working at subway construction sites due to the avoidance of young workers since the past until now. It means that the elderly has a substantial portion among subway construction workers. The productivity has been adversely affected by health problems due to the aging of workers, job stress due to heavy work, and personal health problems. So, the regulation and policies on job stress health management are being strengthened. The data were measured Macpa stress by machine measuring heart rate variability and conducted Korean job stress survey(shortened) from Sa-sang to Ha-dan line Busan subway construction workers for analyzing the relationship. Independent variable were age, job duration, job position, employment type, working type in this study. Macpa's dependent variable was stress index and Korean job stress survey(shortened)'s dependent variables were job requirements, job autonomy, relationship conflict, job instability, organizational structure, inappropriate compensation, working place culture, and total score. SPSS 12.0 K Statistics Program was used for statistical analysis. Kruskal-wallis test, a nonparametric statistical analysis, was used because the data are difficult to be assumed as normal distribution. As a result, the paper indicated the significant correlation between Macpa stress index and Korean job stress(short version). The elderly workers presented higher Macpa index and higher job stress due to aging and heavy-duty work. The majority workers were daily workers who had unstable working condition and uncertainty about the future. The study suggested a manual that could reduce job stress for subway construction workers and future study deriving management tool through analyzing job stress factor is necessary.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.667-674
• /
• 2022

In this study, the correlation between the damage type and operating conditions of the sleepers was analyzed based on the design data and visual inspection results for the concrete sleepers of the sleeper floating track (STEDEF) that have been in operation for more than 20 years. It appeared in the form of cracks, breakages, and breaks in the concrete at the center and tie bar contact and buried areas. As a result of the numerical analysis, it was analyzed that the change in the left and right spring stiffness of the sleeper resilience pad increases the maximum stress, tensile stress, compressive stress, and displacement of the concrete sleeper, and stress concentration in the concrete at the tie bar contact area. It was proved analytically that the sleeper resilience pad can affect the damage of the concrete sleeper. Therefore, damage of concrete sleepers in the sleeper floating track in urban transit could be caused by changes in spring stiffness of sleeper resilience pads. It was reviewed that preventive maintenance such as improvement and timely replacement of sleeper resilience pads was necessary.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.729-736
• /
• 2023

Purpose: The purpose of the Activation of Public Transportation by Analysis of Factors Influencing Satisfaction of Commuting Hours in the Metropolitan Area. Method: This study analyzed the factors affecting wide-area commuting time and satisfaction for office workers who perform wide-area commuting. Result: in the case of commuting satisfaction for wide-area commuting hours by region, commuting time satisfaction was relatively low in the metropolitan area as the average commuting time was high, and commuting time satisfaction was relatively high in the non-metropolitan area as the average commuting time was low. Conclusion: In the future, the government will establish or improve express railways and wide-area buses to reduce wide-area commuting time, and build urban highways to shorten passenger car use time, which will reduce commuting time, but qualitative indicators are more important. In other words, even if commuting time is long, life satisfaction increases, so quality of life is important, and it is necessary to improve commuting time satisfaction rather than simple indicators of commuting time, so both qualitative and quantitative aspects of commuting time need to be improved.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6D
• /
• pp.541-552
• /
• 2010

The light rail transit (LRT) having bus lines as subsystem is being constructed or planned in the suburban area of metropolitans and medium size cities. However, there is difficulty in establishing the service coverage (SC) of the LRT because the LRT is a completely new transit mode in Korea. The purpose of this study is to provide the basic data and techniques to be used for establishing the SC of the future LRT by understanding the SC characteristics of buses and subways and building models to estimate the walking distances of their users. Busan City is selected as the study city and the SC's of buses and subways are surveyed simultaneously. A total of 9 variables for 82 stations are collected and the cluster analysis is conducted about the variables. The station areas are divided to three types of CBD (Central Business District), sub-CBD and regional center based on the analysis. A station in each area is selected as the study station. At the walking distance (WD) analysis for each mode, the 80 percentile WD of the subway is 672 m and that of the bus is 472 m. In comparing the SC's of both modes by the type of station areas, there are not significant differences between the SC's of sub-CBD and regional center except CBD. At analysis of the relationship between the personal attributes and the WD, for subway users the WD of female is longer than that of male and apartment residents use subway more positively than single house residents do. For the models to estimate the walking distances, the simple regression models were built employing the income as independent variable by dividing the stations into CBD abd non-CBD stations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.709-716
• /
• 2006

The rapid changes of family structure such as singles, working couples and so on have effects on a travel behaviour. One of the characteristics from this is the increasing portion of trip-chain, in which plural activities were conducted in a "single outgoing" travel. Therefore travel must be considered as location change to conduct various activities instead of pursuing single travel purpose. This paper specifies a behavioral homogeneous person group by a job, a possession of cars. Based on this classification of person groups and their activity diary, the sequence, time and travel mode of activities in a day can be verified. As a case study household survey was conducted in city Kongju. The survey result shows that the classification of behavioral homogeneous person group based on criteria like employment status and car ownership bring a good result to forecast trip generation in traffic zone.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.1D
• /
• pp.95-103
• /
• 2006

One of the main functions of the 4D system includes visualizing numerical schedule data in construction. The existing 4D tools have an excellent function for simulating building projects that all activities are progressed according to vertical work zone. However, it is not easy to implement all of it in the civil engineering project because the construction activities of highway and railway projects are progressed on the horizontal work zone and the 4D simulation for those projects should include earthwork objects that depend on the natural ground condition. This study suggests a new methodology for improving those limitations of 4D system for the civil engineering project and develops a new system by the suggested methodology. To verify the developed system, this study attempts to simulate 4D object for horizontal elements such as earthwork, paving work and tunneling work. The morphing and multi-texturing techniques developed in the study can be new approaches to simulate 4D object for the earthwork such as cutting and banking whose activities are progressed on the natural ground condition. The research results can be expected as a draft function for improving the application of 4D system in civil engineering projects.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.329-335
• /
• 2009

The purpose of this study is to provide the efficient method and guideline of controlling the cracking in bridge deck concrete due to differential drying shrinkage. Drying shrinkage cracking is mainly influenced by the moisture diffusion coefficient that determines moisture diffusion rate inside concrete structures. In addition to the diffusion coefficient, surface coefficient of concrete surface and relative humidity of ambient air simultaneously affect the moisture evaporation from concrete inside to external air outside. Within the framework of cracking shrinkage cracking mechanism, it is necessary to conceive the numerical analysis, which involves these three influencing factors to predict and control the shrinkage cracking of concrete. In this study, moisture diffusion and stress analysis corresponding to drying shrinkage on bridge deck are performed with consideration of diffusion coefficient, surface coefficient, and relative humidity of ambient air. From the numerical results, it is found that cracking behavior due to differential drying shrinkage of bridge deck concrete shows different feature according to three influencing factors and the methodology of controlling of drying shrinkage cracks can be suggested from this study.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5B
• /
• pp.519-524
• /
• 2010

This study was carried out to select suitable plants for beach revegetation as a preliminary study for quantifying the effect of decreasing sand movement. After planting some herbal plants in field, monitoring of temporal change of vegetation coverage which was index of the growth rate was conducted. Through literature reviews, 24 candidate plants for beach revegetation were selected, then seven species of them, Peucedanum japonicum Thunb., Dianthus japonicus Thunb. ex Murray, Sedum oryzifolium Makino, Sedum takesimense Nakai, Sedum spectabile Boreau, Farfugium japonicum (L.) Kitam., Aster sphathulifolius Maxim. were picked through salinity tolerance experiments in laboratory. Seven species selected by salinity tolerance experiments and two additional herbal plants, Prunella vulgaris var. lilacina Nakai and Linaria vulgaris Mill., not the candidates, were nine final species which were planted in the beach around Osan port, Uljin, Korea. The changes of vegetation coverage of each species were investigated from photos periodically taken for about a year using image processing methods. As a result of the monitoring, Sedum takesimensei, Dianthus japonicus and Aster sphathulifolius were observed with high coverages during the whole monitoring while Prunella vulgaris var. lilacina and Linaria vulgaris were observed with low coverage during the same period. Consequently, Sedum takesimensei, Dianthus japonicus and Aster sphathulifolius were concluded as the most suitable plants for beach revegetation. Furthur study to quantify the effects of decreasing sand movement by the selected species is needed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.10-18
• /
• 2024

Vehicle loading is one of the main causes of bridge deterioration. Although WiM (Weigh in Motion) can be used to measure vehicle loading on a bridge, it has disadvantage of high installation and maintenance cost due to its contactness. In this study, a non-contact method is proposed to estimate the vehicle loading history of bridges using deep learning and CCTV images. The proposed method recognizes the vehicle type using an object detection deep learning model and estimates the vehicle loading based on the load-based vehicle type classification table developed using the weights of empty vehicles of major domestic vehicle models. Faster R-CNN, an object detection deep learning model, was trained using vehicle images classified by the classification table. The performance of the model is verified using images of CCTVs on actual bridges. Finally, the vehicle loading history of an actual bridge was obtained for a specific time by continuously estimating the vehicle loadings on the bridge using the proposed method.